Dräger Primus Quick start guide

D-39523-2015
Disassembly
Loosen the three screws of the
ventilator with a hexagon key.
Tighten the three screws of the
ventilator with a hexagon key.
Pull the breathing system up
and out by the handle.
Use the handle to insert
the breathing system into
the mounting fixture.
Insert the cleaning disk into
the adapter. Close the adapter
until it clicks into place.
Remove the CLIC CO2 absorber.
Unscrew the CLIC adapter
(optional).
Loosen the five screws of the
breathing system with a screw-
driver and remove the cover.
Place the cover on the breathing
system and tighten the five
screws with a screwdriver.
Remove both flow sensors. Lift up the middle part
of the breathing system.
Assembly
Insert the ventilator diaphragm
so that the Dräger inscription
is visible from above.
Remove the upper ventilator
diaphragm.
Loosen the inspiration and
expiration nozzles and pull
them off.
91 02 536 | 16.08-1 | HQ | PP | Subject to modifications | © 2016 Drägerwerk AG & Co. KGaA
Insert both flow sensors.
Put on the inspiration nozzle
and expiration nozzle and
turn to tighten.
Screw on the CLIC adapter
(optional). Insert the CLIC CO2
absorber.
Remove cleaning disk from
the adapter. Close the adapter
so that it can click into place.
Place the middle part of the
breathing system on the bottom
part of the housing.
Primus® Family*
Breathing System
Disassembly/Assembly
90°
90°
* Primus Infinity Empowered, Primus, Pallas, Apollo
90°
90°

Immersion Disinfection:
Please use the dis infectants listed in the operating instructions
for Dräger flow sensors.
Machine cleaning and disinfection:
Position components so that all interior spaces and surfaces
are completely flushed and water can drain off freely.
Sterilization:
SpiroLife® flow sensors are not suitable for plasma or
radiation sterilisation.
Visual check
Manual cleaning
and disinfection
Machine cleaning
and disinfection
Sterilization
D-39523-2015
Primus® Family*
Breathing System
Reprocessing Instructions
This guideline does not replace the instruction for use.