Hillsdale Furniture 1017-010A User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
FURNITURE, LLC.
HILLSDALE
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Date: 04-15-2013
Page 1 of 1
SIESTA UPHOLSTERED DAYBED
Model #1017-010A Sides
Model #1017-020A Back
HARDWARE LIST
A (8) 30mm Wood Screws
B (12) 1/4” x 50mm Allen Bolts
C (12) 1/4” Flat Washers
D (12) 1/4” Spring Washers
E (1) 1/4” Allen Wrench
PARTS LIST
G (1) Back Panel
H (2) Side Panels
I (1) Front Rail
J (1) Rear Rail
K(14) Plywood Slats
QTYPART
8A
12C
HARDWARE QTYPART HARDWARE
12
12
B
D
1E
J
G
H
H
I
BB
C
CD
D
BB
B
B
C
C
C
C
D
D
D
D
A
FIGURE 1
AA
*
Trundle Sold Separately
Model #1719-030 Trundle Panel
K
GH
H
I
STEP4
Insert both ends of each Plywood
Slat (K) onto the Front and Rear
Rails (I & J) and secure with 8
Wood Screws (A). See Figure 1.
The assembly is now complete.
STEP1
Begin assembly by attaching the
Back Panel (G) to the back of each
Side Panel (H) by aligning the holes and securing with 2 Allen Bolts (B), 2
Spring Washers (D) & 2 Flat Washers (C) from the backside per each end.
Do not fully tighten bolts for this step.
STEP2
Next attach the Rear Rail (J) to the back of each Side Panel (H) by
aligning the holes and securing with 2 Allen Bolts (B), 2
Spring Washers (D) and 2 Flat Washers (C) per
each end. Do not fully tighten bolts for this step.
STEP3
Attach the Front Rail (I) to the inside of each Side
Rail (H) in the front by aligning the holes and
securing with 2 Allen Bolts (B), 2 Spring Washers
(D) and 2 Flat Washers (C) per each end. Tighten
all bolts from Steps 1 through 3 using the Allen
Wrench (E) that has been provided.
AA
AA
AA
AA
AA
AA
AA
AA

CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
FURNITURE, LLC.
HILLSDALE
SIESTA UPHOLSTERED DAYBED
Model #1017-030A Trundle
Date: 04-15-2013
Page 1 of 1
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
HARDWARE LIST
A (8) 1/4” x 20mm Allen Bolts
B (28) Slat Caps
C (24) 20mm Wood Screws
D (6) Metal Casters
E (8) Flat Washers
F (8) Spring Washers
G (1) 1/4” Allen Wrench
PARTS LIST
I (1) Trundle Front Panel
J (2) Trundle Side Panels
K (1) Trundle Back Panel
L (14) Bentwood Slats
QTYPART
8A
24C
HARDWARE QTYPART HARDWARE
28
6
B
D
8E 8F
1G
STEP1
Attach each Trundle Side Panel (J) to the backside of the Trundle Front Panel (I) by aligning holes
and securing with 2 Allen Bolts (A), 2 Spring Washers (F) and 2 Flat Washers (E) per each end. Do
not fully tighten bolts for this step.
STEP2
Attach the Trundle Back Panel (K) to the REMAINING side of each Trundle Side Panel (J) also by
aligning holes and securing with 2 Allen Bolts (A), 2 Spring Washers (F) and 2 Flat Washers (E) per
each end. Tighten all bolts from steps 1 and 2.
STEP3
Attach the Casters (D) to the
bottom of each Trundle Front
Panel (I) and Trundle Back Panel
(K) using 4 Wood Screws (C) per
each caster. Tighten all screws.
STEP4
Finally insert the Slat Caps (B) to
both ends of the Bentwood Slats
(L) and install them to both Front
& Rear Panels (I & K) by
pushing into place into
the holes. The
assembly is now
complete.
FF
F
F
F
F
F
F
F
F
F
F
E
E
E
EE
E
E
E
E
E
E
E
J
J
J
K
K&I
K
L
L
I
I
A
A
A
A
A
A
A
A
A
A
B
B
C
C
C
CC
C
C
C
D
D
D
DD
D
D
D