Furniture of America CM1739VN User manual

Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 20-11-20
1 / 12
MODEL #
CM1739 VN
3 - People
Recommended

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 12

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 12

4 / XXXXXXX12

DAY BED
Arm(L&R) Top Back Panel Top Side Rails Bottom Front Panel
Bottom Back Panel Bottom Side Panels Top Slat (13pcs)
Bolt Ø5/16" x 1-1/2"
#1 2pcs #2 1pc #3 2pcs
#5 1pc #6 2pcs #7 1Set
#4 1pc
#A 8pcs #B 4pcs #C 8pcs
Bottom Slat (12pcs)
Top Center
Support Rail
Bottom Center
Support Rail
Plastic feet
Bolt Ø5/16" x 2-1/2" Bolt Ø5/16"x3/4"
#8 1Set
#9 1pc #10 1pc #11 4pcs
5 / 12
CM1739 VN

Spring Washer Ø5/16"
#D 20pcs #E 16pcs
Flat Washer Ø5/16"x19mm
#F 4pcs
Flat Washer Ø5/16"x22mm
Screw #8 x 32mm
#G 75pcs #H 4pcs
Screw #8 x 50mm
#I 1pc
Allen Key 5mm
#1L
#1R
#2
#3
#3
#9
#5
#10
#6
#4 #6
#7
#8
6 / 12

Carton Disignation Part Hardware
#C x 8pcs
Arm （L&R)
Slat Up
Bottom Front Panel
Top Back Panel
Top center wood
supportor (long)
Slat Down
Top Side Rail
Bottom Back Panel
Top center wood
supportor (short)
Plastic feet
#A x 8pcs
#B x 4pcs
#D x 20pcs
#E x 16pcs
#F x 4pcs
#G x 75pcs
#H x 4pcs
#I x 1pc
#1
#7
#8
#2
#3
#4
#5
#6
#10
#11
#9
Bottom Side
7 / 12
is packed in 2 cases
CM1739 VN
CM1739 VN -1
CM1739 VN -2

1
2
Part #1 x1pc
Hardware #H x2pcs
#11
#1
Part #11 x2pcs
Hardware #A x8pcs
Part #3 x2pcs
Hardware #D x8pcs
Hardware #E x8pcs
ASSEMBLY INSTRUCTIONS
x 2
#H
#1
#11
#H
#1
#3
#3
#E #D #A #I
8 / 12
Align feet (#11) to the headboard (#1),
then secure by using screws (#H).
Align side rails (#3) to the headboards
(#1), then secure by using bolts (#A)
with washers (#D,E).

ASSEMBLY INSTRUCTIONS
Part #2 x1pc
Hardware #B x4pcs
Hardware
Hardware
#D x4pcs
#F x4pcs
3
4
Part #9 x1pc
#1
#1
#9
#F #D #B #I
#1
#1
#2
9 / 12
Align and attach the center
support rail (#9) to the
headboard (#1).
Align back panel (#2) to the
headboards (#1), then secure by using
bolts (#B) with washers (#D,F).

ASSEMBLY INSTRUCTIONS
Part #4 x1pc
Part #7 x1set
Part #5 x1pc
5
6
Hardware #G x39pcs
Part #6 x2pcs
Hardware #C x8pcs
Hardware #D x8pcs
Hardware #E x8pcs
#G
#3
#3
#7
#4
#6
#6
#5
#E #D #C #I
10 /12
Align slats (#7) to the rails, then
secure by using screws (#G).
Align front and back trundle panels (#4,5) to
the trundle side panels (#6), then secure by
using bolts (#C) with washers (#D,E).

ASSEMBLY INSTRUCTIONS
7
8
Part #10 x1pc
Part #8 x1set
Hardware #G x36pcs
#10
#6
#6
#G
#8
#4
#5
11 / 12
Align and attach the trundle center support rail (#10) to the side
rails (#6).
Align slats (#8) to the front and back
panels, then secure by using screws
(#G).

ASSEMBLY INSTRUCTIONS
9
10
12 / 12