Hillsdale Furniture LAKEVIEW BAR 4264-890 User manual

STEP 2
Attach each Wine Rack (L) to the bottom of the Bar Top (G) using 2 Allen Bolts (A), 2 Spring Washers
( ) & 2 Flat Washers (D) per each side to secure each in place. Do not tighten bolts.
STEP 3
Secure the Wine Rack (L) to the top of each Support Bar (M) by aligning holes and securing from the
bottom with 1 Allen Bolt (B), 1 Spring Washer ( ) & 1 Flat Washer (D) per each corner. Do not tighten
bolts.
STEP 4
Attach the Support Bars (M) to the inside of each Rear & Front Leg (J & K) by aligning holes and using
1 Allen Bolt (A), 1 Spring Washer ( ) & 1 Flat Washer (D) per each leg. Do not fully tighten bolts.
See next page for more assembly instructions
D
A
J
J
MM
K2
K1
N
P
D
A
A
D
A
D
B
D
A
D
A
D
B
D
A
A
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure
that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult
assembly is required. ustomer Service Phone Number: 502-562-0000
B
HARDWARE LIST
(26) Allen Bolts 1/4 x 5/8
(6) Allen Bolts 1/4 x 1-1/4
(30) Spring Washers 1/4
(30) Flat Washers 1/4
(1) Allen Wrench
PARTS LIST
(1) Bar Top
(2) Rear Legs
(1) Front Left Leg
(1) Front Right Leg
(2) Wine Racks
(2) Support Bars
(1) Lower Shelf
(1) Foot Support
A
B
D
F
G
J
K1
K2
L
M
N
P
Date:
12/08/09
Page 1 of 2
LAKEVIEW BAR
Model #4264-890 Metal w Granite Top
FURNITURE, LLC.
HILLSDALE
DACF
D
A
D
A
STEP 1
Begin assembly by attaching
each Rear & Front Leg (J & K)
to the bottom of the Bar Top
(G) by aligning holes and
securing from the bottom using
2 Allen Bolts (A), 2 Spring
Washers ( ) & 2 Flat Washers
(D) per each leg. Do not fully
tighten bolts for this step.
G

CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for
polishing, as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Date:
12/08/09
Page 2 of 2
STEP 5
Next attach the Lower Shelf (N) to the Rear Legs (J) by aligning holes and securing with 2 Allen Bolts
(A), 2 Spring Washers ( ) & 2 Flat Washers (D) per each rear corner. Do not fully tighten bolts.
STEP 6
Once in place, attach the Foot Support (P) to the front ends of the Lower Shelf (N) by sliding in place
and securing to each Front Leg (K) with 1 Allen Bolt (B), 1 Spring Washer ( ) & 1 Flat Washer (D)
per each side. Next attach the lower ends of the Foot Support to the inside of each Front Leg using
1 Allen Bolt (A) per each end. Tighten all bolts from Steps 1 through 6 using the Allen Wrench (F)
that has been provided. The assembly is now complete.
J
M
M
J
L
G
P
D
B
D
B
A
D
A
D
A
D
A
D
N
K1
K2