Hillsdale Furniture Brandi Youth JR Loft 2001 User manual

To help prevent serious or fatal injuries from entrapment or falls:
• Follow the information on the warnings appearing on the upper bunk end structure
and on the carton. Do not remove warning label from bed.
• Always use the recommended size mattress or mattress support, or both, to help
prevent the likelihood of entrapment or falls.
• Use only mattress which is 75 inches long and 37-1/2 - 38-1/2 inches wide on upper
bunk. Ensure thickness of mattress and foundation combined does not exceed 8
inches and that mattress surface is at least 5 inches (127 mm) below the upper
edge of guardrails.
• Do not allow children under 6 years of age to use the upper bunk.
• Prohibit more than one person on the upper bunk at all times.
• Periodically check and ensure that the guardrail, ladder, and other components are
in their proper position, free from damage, and that all connectors are tight.
• Do not allow horseplay on or under the bed and prohibit jumping on the bed.
• Always use the ladder for entering and leaving the upper bunk.
• Do not use substitute parts.
Contact the manufacturer or dealer for replacement parts.
• Use of a night light may provide added safety precaution for a child using the
upper bunk.
• Always use guardrails on both long sides of the upper bunk. If the bunk bed will be
placed next to the wall, the guardrail that runs the full length of the bed should be
placed against the wall to prevent entrapment between the bed and wall.
• The use of water or sleep flotation mattresses is prohibited.
• STRANGULATON HAZARD - Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example: but not limited to - hooks, belts,
and jump ropes.
! IMPORTANT !
Keep these instructions for future reference.

4
4
1
1
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are
in proper posion, ght and free from damage. Keep this assembly instrucon for future reference. Adult assembly is required. The product of Hillsdale Furniture,
LLC is designed for residenal use only. Customer Service Phone Number: 502-562-0000
Date: 12-28-2016
Page 1 of 3
Brandi Youth JR Lo Bunk Bed
Model #2001/2098/2124/2099-310/311
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
HDFBP
• Do not let any sharp objects touch or rub the surface of
the product.
• When assembling, do not let children play around the
working area.
• Please confirm all parts are correct before starng the
assembly process.
• Do not ghten all bolts and screws completely unl the
enre unit has been assembled and set up.
• Be careful if using power tools as they can over ghten
screws and strip threads.
WARNING
QTYCODE HARDWARE QTYCODE COMPONENTSCOMPONENTS CODE QTY
Right Frame Support1GHLe Frame Support 1
1I J ShelvesShelf Wall 2
Full End Panel1A BOpen End Panel 1
Front Side Panel1C DBack Side Panel 1
Shelf Supports3EFDeck Panels 4
4
9
8
4
1
1
6
3
1
2
3
4
5
6
7
8
M8 x 95mm Allen Bolts
1/4” x 2-3/4” Allen Bolts
1/4” x 5/8” Allen Bolts
M8 Connectors
4mm Allen Wrench
5mm Allen Wrench
1/4” x 1-1/2” Allen Bolts
End Caps
4
1
4
1
G
H
B
A
STEP 1 - Figure 1
Begin assembly by inserng Frame Supports (G & H) down into
slots on Open End Panel (A) and Full End Panel (B). Insert
Connectors (4) into sides of Frame Supports (G & H) and secure
from end panels with Allen Bolts (1). Tighten bolts with Allen
Wrench (6) provided.
FIGURE 1

I
Date: 12-28-2016
Page 2 of 3
Brandi Youth JR Lo Bunk Bed
Model #2001/2098/2124/2099-310/311
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
STEP 4 - Figure 3
Insert Shelves (J) down on
to Shelf Supports (F).
G
H
2
3
3
3
3
F
F
J
J
B
2
FIGURE 2
FIGURE 3
STEP 2 - Figure 2
Next aach Le and Right
Shelf Wall (I) in between Le
and Right Support Frames (G
& H) using 1 Allen Bolt (2)
from each end.
STEP 3 - Figure 2
Aach Shelf Supports (F) in
between End Panel (B) and
Shelf Wall (I) using 2 Allen
Bolts (3) per support.
Tighten all bolts from steps 2
and 3 with Allen Wrench (5).
A

8
Date: 12-28-2016
Page 3 of 3
Brandi Youth JR Lo Bunk Bed
Model #2001/2098/2124/2099-310/311
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
A
A
STEP 7 - Figure 6
Aach Back Side Panel (C) to
End Panels (A & B) using 1
Allen Bolt (2) per side and to
Le Frame Support (G) using
2 Allen Bolts (2) from
underneath. Aach Front
Side Panel (D) to Open End
Panel (A) with 1 Allen Bolt (2)
and to Right Frame Support
(H) using 2 Allen Bolts (2)
from underneath. Tighten all
bolts with Allen Wrench (5) provided.
The assembly is now complete.
7
77
7
7
7
B
E
EE
2
2
2
2
2
2
C
D
FIGURE 4
FIGURE 5
FIGURE 6
STEP 5 - Figure 4
Insert Deck Panels (E) down
in bewtween Le and Right
Frame Supports (G & H) and
secure each with 2 Allen
Bolts (7). Tigthen bolts with
Allen Wrench (5) provided.
STEP 6 - Figure 5
Insert End Caps (8) into openings on ends of Side
Panels (C & D).
GH
H
G