Hillsdale Furniture 6319-826-830 User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are
in proper posion, ght and free from damage. Keep this assembly instrucon for future reference. Adult assembly is required. The product of Hillsdale Furniture,
LLC is designed for residenal use only. Customer Service Phone Number: 502-562-0000
Stewart Indoor Outdoor Swivel Stool
Model #6319-826-830
HDFBP
QTYCODE COMPONENTSCOMPONENTS
1A
CODE
B LegsSeat
1C Back
QTY
4
DSupport Ring1
QTYCODE HARDWARE
8
6
2
8
8
1
1
2
3
4
5
6
1/4” x 15mm Sunk Bolts
1/4” x 15mm Allen Bolts
1/4” x 22mm Allen Bolts
Φ6.5 Flat Washers
Φ6.5*δ1.5 Spring Washers
Allen Wrench
A
B B B B
C
D
Date: 01-10-2017
Page 1 of 2
• Place the parts and assemble on a flat, non-abrasive and
so surface such as a carpet or cardboard to avoid
damaging the item. Seek assistance to assemble bulky or
heavy items. Aer final alignment, make sure all bolts
and nuts are securely ghtened with screw head covers
pressed in place.
• Do not fully ghten the bolts unl assembly is completed
and alignment is correct.
• Do not crawl or stand on the product.
• Do not set or lay heavy items on the product.
• Do not place hot items on the product.
• Periodic checks are recommended to make sure that all
hardware is securely ghtened and stable for designed use.
WARNING
Read these instrucons thoroughly before assembling and using.
Failure to do so may result in faulty assembly and potenal injury!
Care and Maintenance
Store furniture in an upright posion.
Be careful to never allow water to build up in frames as this will
cause corrosion and freeze damage in cold climates. Wash all
frames with a soluon of mild soap and water. Rinse with clean
water and dry with a so absorbent cloth towel. If your set
includes cushions, they may be cleaned by hand with a soluon
of soap and water and then rinsed with clean water. Never
machine wash or dry cushions. Do not use bleach or solvents
to clean any product! Periodic checks are recommended to
make sure that all hardware is securely ghtened and stable for
designed use. It is recommended to store or cover furniture
when not in use to extend the life of the product.
A failure to properly follow assembly instrucons and care and
maintenance will void the warranty.

55
2
3
4
5
3
4
4
5
2
4
5
2
4
11
Stewart Indoor Outdoor Swivel Stool
Model #6319-826-830
STEP 1 - Figure 1
Begin assembly by aaching Seat (A) to Back (C)
using 2 Allen Bolts (3), 2 Spring Washers (4) and 2
Flat Washers (5) from the outside and 2 Allen
Bolts (2), 2 Spring Washers (4) and 2 Flat Washers
(5) from the inside
STEP 2 - Figure 2
Aach Legs (B) to Seat (A using 2 Sunk Bolts (1) per
leg.
STEP 3 - Figure 2
Aach Legs (B) to Support Ring (D) using 1 Allen
Bolt (2), 1 Spring Washer (4) and 1 Flat Washer (5)
per leg. The assembly is now complete.
A
A
C
FIGURE 1
FIGURE 2
B
B
B
B
D
Date: 01-10-2017
Page 2 of 2