Hillsdale Furniture CASTILLE 5976-880 User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 01-20-2016
Page 1 of 2
CASTILLE METAL KITCHEN ISLAND
Model #5976-880
HARDWARE LIST
A (10) 1/4” x 12 Allen Bolts
B (24) 1/4” x 15 Sunk Bolts
C (10) Ф6.5 x 1.5 Spring Washers
D (10) Ф13 x Ф6.5 x 1.5 Flat Washers
E (1) Allen Wrench
PARTS LIST
F (1) Top
G (2) Top Supports
H (2) Leg Panels
I (1) Bottom Shelf
J (2) Cross Bars
STEP 2 - Figure 2
Next attach one Cross Bar (J) to bottom of
Leg Panel (H) using 2 Sunk Bolts (B). Attach
other Cross Bar (J) to top of Leg Panel (H)
using 2 Sunk Bolts (B). Do not fully tighten
bolts for this step.
STEP 3 - Figure 3
Next insert Bottom Shelf (I) onto Leg Panel (H)
and secure each end with2 Sunk Bolts (B). Do
not fully tighten bolts for this step.
QTYPART
10C
1E
10A
HARDWARE QTYPART HARDWARE
24
10
B
D
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
HDFBP
FIGURE 1
G
GG
G
H
H
H
BB
B
B
FIGURE 2
J
H
J
BB
B
B
BB
B
B
STEP 1 - Figure 1
Begin assembly by
attaching Top Supports (G)
to one Leg Panel (H) using
2 Sunk Bolts (B) per side.
FIGURE 3
I
H
BB
B
B
BB
B
B

CASTILLE METAL KITCHEN ISLAND
Model #5976-880
Date: 01-20-2016
Page 2 of 2
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
G
H
BB
FIGURE 5
FIGURE 4
G
G
H
H
H
CC
DD
CC
D
D
I
STEP 4 - Figure 4
Repeat steps 1-3 to attach the
remaining Leg Panel (H) to the
assembly. Tighten all bolts with
Allen Wrench (E).
STEP 5 - Figure 5
Finally, place Top (F) upside
down on a clean smooth
surface to prevent from
scratching. Attach bottom
assembly to Top (F) using 10
Allen Bolts (A), 10 Spring
Washers (C) and 10 Flat
Washers (D). Tighten bolts
with Allen Wrench (E)
provided. Turn table to
upright position. The
assembly is now complete. F
CC
D
D
CC
D
D
CC
D
D
CC
DD G
G
CC
DD
CC
D
D
CC
D
D
CC
DD
AA
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
G
H
BB
BB
B
B
BB
B
B
BB
B
B
BB
B
B