Hillsdale Furniture HAYDEN 1456-704 User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 07-24-2014
Page 1 of 2
HAYDEN UPHOLSTERED BED IN A BOX
Model #1456-704 - Full
Model #1456-705 - Queen
STEP 1 - Figure 1
Begin assembly by inserting 1 Wood Dowel (J)
into each Foot (O) on the angled side. Lightly
hammer dowels to make sure they are in tightly
(hammer not included).
STEP 2 - Figure 2
Next attach Feet (O) to Footboard (K) by
inserting the dowel in the inside hole and
securing with 1 Allen Bolt (A) per foot. Tighten
bolts with Allen Wrench (F) provided.
STEP 3 - Figure 3
Line up each set of Left (L) and Right (M) Side Rails to each
other and secure them together with the Rail Supports (N) using
4 Allen Bolts (B), 4 Spring Washers (I) and 4 Flat Washers (H).
Tighten all bolts with Allen Wrench (F) provided.
HARDWARE LIST
A (2) M6 x 40mm Allen Bolts
B (8) M6 x 35mm Allen Bolts
C (10) M3.5 x 32 Wood Screws
D (8) M8 x 20mm Allen Bolts
E (4) M6 x 50 Allen Bolts
F (1) M4 x 100 Allen Wrench
G (1) M5 x 65 Allen Wrench
H (16) Flat Washers
I (16) Spring Washers
J (2) Wood Dowels
PARTS LIST
K (1) Footboard
L (2) Left Side Rails
M (2) Right Side Rails
N (2) Rail Supports
O (2) Feet
P (13) Slats
Q (2) Cross Bars
R (4) Cross Bar Supports
QTYPART
1G
16I
HARDWARE QTYPART HARDWARE
16
2
H
J
4E 1F
10C 8D
2A 8B
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
FIGURE 2
FIGURE 1
AA
B
B
H
H
I
I
J
J
K
K
L
L
O
O
M
M
N
FIGURE 3

HAYDEN UPHOLSTERED BED IN A BOX
Model #1456-704 - Full
Model #1456-705 - Queen
STEP 5 - Figure 5
Attach center Slat (P) to Rail
Supports (N) using 1 Wood
Screw (C) per side. Tighten
screws with Phillips head
screwdriver (not included).
STEP 6 - Figure 6
Attach 2 Cross Bars (Q) to
4 Cross Bar Supports (R)
securing through Slats (P)
with Allen Bolts (E). Tighten
all bolts with Allen Wrench
(F) provided. The assembly
is now complete.
STEP 4 - Figure 4
Attach Side Rails (L & M) to Headboard and Footboard (K)
using 2 Allen Bolts (D), 2 Spring Washers (I) and 2 Flat
Washers (H) per side. Tighten all bolts with Allen Wrench
(G) provided.
Date: 07-24-2014
Page 2 of 2
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
CC
D
D
E
E
H
H
I
I
M
FIGURE 4
L
L
L
M
M
M
FIGURE 5
FIGURE 6
P
P
R
N
Q
K