Hillsdale Furniture 4333-880 User manual

2
2
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are
in proper posion, ght and free from damage. Keep this assembly instrucon for future reference. Adult assembly is required. The product of Hillsdale Furniture,
LLC is designed for residenal use only. Customer Service Phone Number: 502-562-0000
Date: 11-18-2016
Page 1 of 2
Casted Foot End Table
Model #4333-880
QTYCODE HARDWARE
2
4
5
5
5
1
1
2
3
4
5
6
1/4” x 25mm Sunk Bolts
1/4” x 15mm Sunk Bolts
1/4” x 12mm Allen Bolts
Spring Washers
Flat Washers
Allen Wrench
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
QTYCODE COMPONENTSCOMPONENTS CODE QTY
HDFBP
1C D ConnectorPost
1ETop
1
1ABLegsLeg Panel 2
STEP 1 - Figure 1
Begin assembly by aaching Legs (B) to Leg
Panel (A) using 2 Sunk Bolts (2) per leg.
• Do not let any sharp objects touch or rub the surface of the product.
• When assembling, do not let children play around the working area.
• Please confirm all parts are correct before starng the assembly process.
• Do not ghten all bolts and screws completely unl the enre unit has been assembled and set up.
• Be careful if using power tools as they can over ghten screws and strip threads.
WARNING
A
B B
2
2
FIGURE 1

3
3
5
1
1
4
Date: 11-18-2016
Page 2 of 2
Casted Foot End Table
Model #4333-880
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
STEP 2 - Figure 2
Take leg assembly and
insert Post (C) and secure
using 1 Sunk Bolt (1).
STEP 3 - Figure 3
Secure Connector (D) with
Sunk Bolt (1).
STEP 4 - Figure 4
Aach Connector (D) to
Top (E) and secure with 4
Allen Bolts (3), 4 Spring
Washers (4) and 4 Flat
Washers (5).
STEP 5 - Figure 5
Aach Post (C) with leg assembly
into Connector (D) and secure
with 1 Allen Bolt (3), 1 Spring
Washer (4) and 1 Flat Washer (5).
Tighten all bolts using Allen
Wrench (6) provided. The
assembly is now complete.
A
C
D
D
E
FIGURE 2
FIGURE 3
3
5
4
3
5
4
3
5
4
FIGURE 4
D
C
45
FIGURE 5