Hillsdale Furniture Gannon 2078-550 User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are
in proper posion, ght and free from damage. Keep this assembly instrucon for future reference. Adult assembly is required. The product of Hillsdale Furniture,
LLC is designed for residenal use only. Customer Service Phone Number: 502-562-0000
Date: 11-28-2016
Page 1 of 3
Gannon Adult Bed
Model #2078-550 QK- Side Rail
Queen - Model #2078-570 - Headboard • Model #2078-580 - Footboard w/Drawer
King- Model #2078-670 - Headboard • Model #2078-680 - Footboard w/Drawer
QTYCODE HARDWARE
26
8
8
8
1
3
1
2
3
4
5
6
Wood Screws
1/4” x 2” Long Allen Bolts
Flat Washers
Spring Washers
Allen Wrench
1/4” x 1-3/8” Short Allen Bolts
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
HDFBP
• Do not let any sharp objects touch or rub the surface of the product.
• When assembling, do not let children play around the working area.
• Please confirm all parts are correct before starng the assembly process.
• Do not ghten all bolts and screws completely unl the enre unit has been assembled and set up.
• Be careful if using power tools as they can over ghten screws and strip threads.
WARNING
2
2
3
3
4
4
STEP 1 - Figure 1
Begin assembly by aaching Headboard (A) to
Headboard Legs (Le & Right) (B) with 4
Allen Bolts (2), 4 Spring Washers (4) and 4
Flat Washers (3) per leg. Tighten bolts with
Allen Wrench (5) provided.
Right
Le
B
A
B
FIGURE 1
QTYCODE COMPONENTSCOMPONENTS
C
CODE
Center Rail
Set of Slats
Set of Slats
QTY
1
H
G
F
Short Support Legs
Support Legs
3
3
1
1
2B
E
Side Rails
Footboard with Drawers
1
1ADHeadboard 2
Headboard Legs
(Le & Right)

STEP 2 - Figure 2
Turn Footboard with Drawers (C)
upside down on a clean smooth
surface to prevent scratching. Insert
Short Support Legs (H) into
Footboard with Drawers (C) and
hand ghten. Return Footboard with
Drawers (C) to upright posion.
Date: 11-23-2016
Page 2 of 3
Gannon Adult Bed
Model #2078-550 QK- Side Rail
Queen - Model #2078-570 - Headboard • Model #2078-580 - Footboard w/Drawer
King- Model #2078-670 - Headboard • Model #2078-680 - Footboard w/Drawer
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
H
H
D
D
D
D
C
FIGURE 3
FIGURE 4
B
B
B
C
C
STEP 3 - Figure 3
Next aach each Side Rail (D) to each Headboard
Leg (B) by inserng the metal teeth into the open
slots and pressing in place. Check to make sure
each side is secure.
STEP 4 - Figure 4
Aach each Side Rail (D) to each post on
Footboard (C) by inserng the metal teeth
into the open slots and pressing in place.
Check to make sure each side is secure.
FIGURE 2
H

Date: 11-23-2016
Page 3 of 3
Gannon Adult Bed
Model #2078-550 QK- Side Rail
Queen - Model #2078-570 - Headboard • Model #2078-580 - Footboard w/Drawer
King- Model #2078-670 - Headboard • Model #2078-680 - Footboard w/Drawer
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
STEP 5 - Figure 5
Line up holes of Slats (E) with
those on Center Rail (F) and
Support Legs (G) then secure
with Allen Bolt (6).
Note: The handle is pre-aached inside
the drawer box. Please unfasten screws
then re-posion and ghten the handle
on outside of each drawer.
STEP 6 - Figure 6
Secure each Slat (E) to the
inside of each Side Rail (D) by
aligning holes and securing in
place with 1 Wood Screw (1)
per end. Tighten screws with a
Phillips head screwdriver (not
included), but do not over
ghten screws. The assembly is
now complete.
FIGURE 5
6
F
G
E
E
D
1FIGURE 6