Members Mark Ainsworth GC-8984-ARP-G User manual

Ainsworth Papasan Chair - Gray
Model Number: GC-8984-ARP-G
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Manual

Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, do not dispose of any
packaging or contents of the shipping carton until assembly is complete.
Use the parts and hardware lists below to identify and separate each of the
pieces included.
The use of power tools for assembly is not recommended. Power tools can
damage the hardware.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow
these instructions may cause the bolts to misalign during assembly.
Dust often and use a vacuum cleaner crevice tool to clean seams. To maintain
the woven appearance, gently clean soiled areas with a soft cloth dampened
with a mild, water based detergent. Remove all lather and wipe with a clean
damp cloth. Dry with another soft cloth by blotting the damp surface (do not
rub).
Before Assembly
Care and Cleaning
Important Safety Information
Please read all instructions carefully before assembling this furniture.
For your safety, assembly by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.

Components
A.......Chair frame.......1
B.......Chair base.........1
Hardware
(D)
Hex Head Bolt
Qty: 4
(E)
Flat Washer
Qty: 4
(F)
Hex Wrench
Qty: 1
A
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
C..........Cushion..........1
B C

Place Chair Frame (A) upside down on a carpeted or scratch-free surface.
Attach Chair Base (B) to Chair Frame (A) using Hex Head Bolt (D) and Flat Washer
(E).
Tighten all Hex Head Bolts (D) with Hex Wrench (F).
Step 1
(D)
Hex Head Bolt
Qty: 4
(E)
Flat Washer
Qty: 4
(F)
Hex Wrench
Qty: 1
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

Place your fully assembled papasan chair in the upright position. Use the cushion ties
and the metal ring to secure Cushion (C) to the papasan chair.
Step 2
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

Now your chair is ready for enjoyment!
Step 3
Need Assistance? Visit us at: samsclub.com/membersmarkhelp