Hillsdale Furniture Clarion User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are
in proper position, tight and free from damage. Keep this assembly instruction for future reference.Adult assembly is required. The product of Hillsdale Furniture,
LLC is designed for residential use only. Customer Service PhoneNumber: 502-562-0000
Date: 05-17-2017
Page 1 of 2
Clarion
Round
Table
QTYCODE HARDWARE
4
4
4
8
12
20
1
1
4
1
2
3
4
5
6
7
8
9
Ø5/16” x 2½” Hex Nuts
Ø5/16” Spring Washers
Ø5/16” Flat Washers
M6 x 40mm Allen Bolts
M6 x 60mm Allen Bolts
M6 Spring Washers
Open Wrench
Allen Wrench
Adjustable Feet
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
QTYCODE COMPONENTSCOMPONENTS
1A
CODE
B PedestalTable Top
QTY
1
HDFKC
• Do not let any sharp objects touch or rub the surface of the product.
• When assembling, do not let children play around the working area.
• Please confirm all parts are correct before starting the assembly process.
• Do not tighten all bolts and screws completely until the entire unit has been assembled and set up.
• Be careful if using power tools as they can over tighten screws and strip threads.
WARNING
Model #103680-110784 (4541-810) - Dining Table - Top
Model #103681-110786 (4541-811) - Dining Table - Base
Model #103680-110806 (4542-835) - Counter Table - Top
Model #103687-110807 (4542-836) - Counter Table - Base
1C D Leg 2Leg 1
4E Bottom Supports
1
F Top Supports4
E
E
F
E
E
D
C
B
A
810 Wood Button

10
10
51
2
3
4
6
5
6
6
9
Date: 05-17-2017
Page 2 of 2
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
STEP 1 - Figure 1
Begin assembly by putting Leg 2 (D) on
to bottom of Pedestal (B) and then
attach Leg 1 (C) over the top of Leg 2 (D).
Line up the holes and secure with Allen
Bolts (5) and Spring Washers (6). Next
attach Feet (9) to bottom of Legs (C & D).
STEP 2 - Figure 2
Attach Bottom Supports (E) to Legs (C & D) and
Pedestal (B) using 2 Allen Bolts (4) and 2 Spring
Washers (6) per support. Tighten all bolts using
Allen Wrench (8) provided. Insert each Wood
Button (10) to cover the bolt head.
STEP 4 - Figure 3
Put Table Top (A) upside down on a clean
smooth surface to prevent scratching. Attach
bottom assembly to Table Top (A) by using 2
Allen Bolts (5) and 2 Spring Washers (6)
through each Top Support (F). Tighten all
bolts using Allen Wrench (8) provided.
Return table to upright position. The
assembly is now complete.
Clarion
Round
Table
Model #103680-110784 (4541-810) - Dining Table - Top
Model #103681-110786 (4541-811) - Dining Table - Base
Model #103680-110806 (4542-835) - Counter Table - Top
Model #103687-110807 (4542-836) - Counter Table - Base
C
D
B
B
F F
F
4
6
E
E
E
E
A
FIGURE 1
FIGURE 2
FIGURE 3
F
F
F
F
F
C
D
STEP 3 - Figure 2
Attach Top Supports (F) to Pedestal (B) by sliding
into place and securing from the inside with 1 Flat
Washer (3), 1 Spring Washer (2) and 1 Nut (1) per
support. Tighten nuts using Open Wrench (7)
provided.