Hipargero AquaKnight A029 User manual

Please read this manual before operating your device and keep it for future reference!
www.hipargero.com
AquaKnight A029
LED Aquarium Light
2021 updated version

Delivery Contents
1 x Aqua Knight LED light
1 x Power plug
1 set Bracket
1 x User’s manual
5 x Screws in a bag (1 spare include)
Product Features
Colorful spectrum
Touch control function
Build-in Timer
Sunrise and Sunset
Adjustable bracket
Setting AutoSave
Simple installation
Fashionable design
High quality XPE &Epileds
Designed for marine tank specially
Two-rollers silent fans
(Fan work only when the channels turn on)
Two channels with intensity dimming
LED Layout
Channel 1: XPE white 5w LEDs×3pcs
Channel 2: Epileds Violet 3w×1pcs + XPE Royal blue 3w×4pcs + XPE Blue 3w×1pcs

Specification
Spectrum
Item
Specification
Item
Specification
Product model
A029
Input voltage
100～240V-AC
LEDs quantity
9pcs
Single LED wattage
3/5W
Max power
30W
Dimension(mm)
220x110x30
Frequency
50～60Hz
Suitable for
10-18 inch tank
Shell material
E-Plastic
Shell color
Black
Working temperature
0℃to 40℃
Storage temperature
-10℃to 50℃

Assembly Diagram

L2
B
Instruction
Turn on/ turn off the light
Click the W button and button at the same time to turn on or turn off the light.
Signal channel control
Click the W button to adjust the brightness of white channel.
Click the button to adjust the brightness of blue channel.
Correspondence between the indicators and the brightness of the channel shown below:
SN.
Diagrammatic drawing
Indicator light
Brightness of the channel
that we are dimming(W/B)
1
L1 on, L2 & L3 off
20%
2
L2 on, L1 & L3 off
40%
3
L3 on, L1 & L2 off
60%
4
L1 & L2 on, L3 off
80%
5
L1 & L2 & L3 on
100%
6
L1 & L2 & L3 off
0%
Timing function
Touch button to set the time schedule per day.
Correspondence between the indicator light and the time set:
SN.
Diagrammatic drawing
Indicators
Working Hours Per Day
1
L1 on, L2 & L3 off
8h
2
L2 on, L1 & L3 off
12h
3
L3 on, L1 & L2 off
14h
4
L1 & L2 on, L3 off
24h
5
L1 & L2 & L3 on
24h
Function Instruction
NOTICE!
1. Indicator will go off after 5 minutes if no operation. And it turn on when any button touched.
2. Indicator mainly show time schedule. It can also indicate brightness when W or B button touched.
3. All the 3pcs of indicators will flicker at the same time when switching between timer and W/B button.
4. Timing start when AC power on. The sunrise time is the clock of AC power on.
5. Sunrise and Sunset time both 30minutes.
B

(1)Factory setting of A029 as below
Brightness of blue channel: B=100%
Brightness of white channel: W=100%
Time: 24hours
That means the light will full on for 24 hours/day.
(2)Timer function
Support 8H, 10H, 12H, 14H and 24H per day for choose.
Touch the button to set the working hours you wanted. (Working hours per day.)
Please note that the timing start when we plug on the light and the sunrise time start
at the same time.
The lamp will run sunset function before turning off.
The sunrise and sunset time both 30minutes.
(3)Built-in Sunrise, Sunset function
The built-in sunrise/sunset function simulate nature sunrise and sunset, the brightness
of the light will change slowly at the start and at the end of working time.
e.g., if setting light run 10 hours/day from 7:00 am(AC plug on time) and brightness
are 80%.
Brightness of the light changed from 0% to 80% between 7:00-7:30
Brightness of the light keep 80% between 7:30-16:30
Brightness of the light changed from 80% to 0% between 16:30-17:00
Sunrise and Sunset duration is fixed 30minutes.
Sunrise time is started when AC plug on. So if customer want sunrise is 7:00 am, need
do AC plug on at 7:00am.

(4)Setting Auto-save function
This light has memory function, all the data (Channel Brightness & Working hours)
that we set can’t be lost when power cut.
The light will run based on setting when power on again. The sunrise function will
first run with 30min.
The sunrise time is changed based on AC plug on time.
(5)Check the setting data
Touch corresponding button, the indicators will show the setting data.
For example,
Touch W button, L1&L2 on, L3 off, then we could judge the setting brightness is 80%.
Touch timer button , L1&L2 on, L3 off, then we could judge working hours is 10H.
Frequently asked questions
Q1
Why the fan stop work when the brightness of the light is 0%?
It will work only when the light is working.
The fan will stop work when unplugged the light or the brightness of two channels
both 0%.
Q2
Q3
What’s the installation steps of A029?
Step 1: Assemble the bracket and the light together
Step 2: Install the light on you tank
Step 3: Put the plug into outlet
Install the light first, then put the plug into outlet, DON’T MAKE IT INVERSE!
Could the light work with a timer?
No need extra timer.
This light has timer function itself.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-

Warranty
No damage to human factors, 365 days warranty and life-long technical support!
If any doubt or problem with our product, please do not hesitate to contact us!
to contact us:
Email: [e-mail]
Email: [e-mail]
Website: www.hipargero.com
Send message via Amazon
All the emails will replied within 24 hours!
Contact us at anytime you need help!
Lear more about Hipargero
www.hipargero.com