Hiplok Spin User manual

HIPLOKSPIN
Wearable Chain (Combination) Lock
Medium
-
380 x 50 x 60mm
Waist 26” - 44”
750mm
760g
4 Digit Combination Lock (No keys required)
6mm Steel Chain
Slimline, lightweight, intergrated design
Patented buckle fastening
High Visibility Sleeve (SUPERBRIGHT Version)
All Black Neon Yellow SUPERBRIGHT
SP1AB SP1NY SP1SB
LOCKING PRODUCT:WEARING PRODUCT:
PRODUCT GUIDE
XXX
CODE REGISTRATION
Don’t get caught out. Register your code and contact us if you ever forget it.
Please note that only registered codes can be recovered. You will be asked to provide some basic
verification information as part of the recovery process. Register now before you forget!
www.hiplok.com/register
LOCK TYPE
SECURITY RATING
SECURITY AWARDS
DIMENSIONS
SIZING
LOCKING LENGTH
WEIGHT
FEATURES
COLOURS / CODES

DO wear your Hiplok over at least one layer of clothing and ensure it is not able to slip down the body. Ensure it is comfortable before riding
DO check size guide for waist dimensions. Hiplok is not intended for use by children
DO be aware of your surroundings and always treat road vehicles, pedestrians and other cyclists with caution. Wear appropriate hi-vis
clothing and bicycle lights when riding at night
ALWAYS ride safely and to your own ability. Regularly check your bike for general maintenance issues such as brake and tire wear
HIPLOK has been designed to reduce the risks associated with wearing a chain or lock on the body. However, extra care should always be
taken when using any such product in this way to avoid potential accidents and injuries
Look after your lock by occasionally using a small amount of metal lubricant in the padlock mechanism. Your sleeve can be removed by
unscrewing the bolts then washed and wiped clean
Always lock your bike to a secure fixing and if possible ensure lock is away from the ground. For more information log on to www.hiplok.com
IMPORTANT INFORMATION
HIPLOKSPIN
PRODUCT GUIDE
Adjust round waist to carry
Fold chain end into sleeve when wearing
CARRYING
LOCKING AND UNLOCKING
To open / unlock change
Numbers to personal code
Change numbers
To lock
Insert male part into
Locking cylinder
1 2 3
NOTE:
Factory Setting
Is: 0-0-0-0
TO SET CODE
1 2 3
Turn reset dial
1/4 turn
Turn reset dial
1/4 turn back
Adjust numbers to
personal code