Hisense HR6VFF177A Mounting instructions

Before operating the unit,please read this manual thoroughly,
and retain for future reference
USER’S OPERATION MANUAL
MODEL:HR6VFF177A

3
INDEX
Operating Instructions ..............................................................2
Important Safety Instructions ...................................................4
Installation Instruction...............................................................6
Description of the Appliance ....................................................7
Using Your Appliance ................................................................8
Thermostat Control…………………………………………………9
Door reversal.............................................................................10
Hints and Tips ..........................................................................12
Trouble Shooting…………………………………………………..13
Service/Repair ..........................................................................14
Disposal of the appliance........................................................15

4
Important Safety Instructions
These warnings are provided in the interest of your safety. Ensure that you understand them all
before installing or using this appliance. Your safety is of paramount importance. If you are still
unsure about the meaning of these warnings, contact the Customer Care Department for
assistance.
Intended use
This freezer is intended for use in the home. It is suitable for the storage of food at low
temperature. If the appliance is used for purposes other than those intended or used incorrectly, no
liability can be accepted by the manufacturer for any damage that may be caused. Alterations or
changes to the refrigerator are not permitted for reasons of safety.
Prior to initial start-up
Check the appliance for transport damage. Under no circumstances should a damaged appliance
be plugged in. In the event of serious damage, don’t hesitate to contact your supplier.
Refrigerant
The refrigerant isobutene (R
R600a
) is contained within the refrigerant circuit of the appliance, a natural
gas with a high level of environmental compatibility, which is nevertheless flammable. During
transportation and installation of the appliance, ensure that none of the components of the
refrigerant circuit becomes damaged.
The refrigerant (R600a) is flammable.
Caution: risk of fire
If the refrigerant circuit should become damaged:
zAvoid open flames and sources of ignition.
zThoroughly ventilate the room in which the appliance is situated.
The instructions shall include the warnings:
WARNING!
—Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear
of obstruction.
WARNING!
—Do not use mechanical devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
WARNING!
—Do not damage the refrigerant circuit.
WARNING!
—Do not use electrical appliances inside the food storage compartments of the
appliance.
WARNING!
—This appliance is not intended for use by persons (including children) with reduced

5
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
WARNING!
—Young children should be supervised to ensure that they do not play with the
appliance
WARNING!
—If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
WARNING!
—When disposing of the appliance, do so only at an authorized waste disposal centre.
Do not expose to flame.
WARNING!
—Please keep the appliance away from substance, which can cause ignition.
WARNING!
--- Before obtaining access to terminals, all supply circuits must be disconnected.
WARNING!
--- Please remove all the doors before you dispose your refrigerator.
WARNING!
--- The fridge is only applied with power supply of single phase alternating current of
220~240V/50Hz. If fluctuation of voltage in the district of user is so large that the voltage exceeds
the above scope, for safety sake, be sure to apply A.C. Automatic voltage regulator of more than
350W to the fridge. The fridge must employ a special power socket instead of common one with
other electric appliances. Its plug must match the socket with ground wire.
Safety of children
Packaging (e.g. wraps, polystyrene) can be dangerous for children. There is a risk of suffocation!
Keep packaging materials away from children!
Remember to dispose of old appliances in accordance with local laws. Pull out the mains plug, cut
off the mains cable, break or remove spring or bolt catches if fixed. And ensure that children
cannot lock themselves in the appliance when playing (there is risk of suffocation) or involve themselves
in other dangers, for children cannot recognize the hazard present in household appliances themselves.
Therefore, it is very important for parents to make adequate supervision and never let children play
with the appliance!
Daily operation
Containers with flammable gases or liquids can leak at low temperature. There is a risk of explosion!
Do not store any container with flammable materials such as spray cans in the refrigerator.
Do not operate any electrical appliance in the refrigerator (e.g. electric ice cream makers, mixers
etc.).
Before cleaning the appliance, always switch off the appliance and unplug it, or pull the house fuse
or switch off the circuit breaker.
In case of malfunction
If a malfunction occurs, please look first in the “Trouble Shooting” section for help. If the information
given there does not help, just leave it alone and ask your supplier for help. Under no circumstances
should you attempt to repair the appliance yourself.

6
Remove transport packaging
The appliance and the interior fittings are protected for transportation. Pull off the adhesive tape on
the left and right side of the door. You can remove any remnants of adhesive using white spirit.
Remove all adhesive tape and packing pieces from the interior of the appliance.
Installation Instruction
Before installing, carefully read the instruction in order to avoid a certain number of problems.
Positioning
Position the appliance away from sources of heat such as stoves, radiators, direct sunlight etc.
Maximum performance and safety are guaranteed by maintaining the correct indoor temperature for
the class of unit concerned, as specified on the rating plate. This application perform well from N to
ST. The Appliance may not work properly if it is left for a longer period at a temperature above or
below the indicated range.
IMPORTANT!
-There is a need of good ventilation around the fridge for easy dissipation of heat, high
efficiency of refrigeration and low power consumption. For this purpose, sufficient clear space
should be available around the fridge. It is advisable for there to be 75mm separating the back of the
fridge to the wall, at least 100mm of space at its two sides, height of over 100mm from its top and a
clear space upfront to allow the doors to open 160 Degrees.
Climate classification Ambient temperature
SN 10~32°C
N 16~32°C
ST 16~38°C
T 16~43°C
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the lower rear
section of appliances, as poor air circulation can affect performance. Built-in appliances should be
positioned away from heat sources such as heaters and direct sunlight.
Leveling
The appliance should be level in order to eliminate rocking. To make the appliance level, it should be
upright and both adjusters should be firmly contacted with the floor. You can also adjust the level by
screwing out the appropriate level adjuster at the front (use your fingers or a suitable spanner), but
much care should be taken when moving this appliance since it should be heavy.

8
Drawers in freezer
Freezing or storing foods.The quick-freeze foods must be evenly placed in drawer, and put them
together to store after freezing.
IMPORTANT!
– in order to make the most of the volume of the fresh food storage compartment and
frozen-food storage compartment, the user can remove one or more drawers, out of the appliance,
according to your daily use.
Using Your Appliance
This appliance is designed for domestic use only, specifically for the storage of edible foods. And it is
designed to operate in ambient temperatures (surrounding air temperature) between 16ćand 38ć.
If the temperature exceeds that designed, either colder or warmer, the appliance will not work
effectively and correctly. Should the ambient temperature be exceeded for long period of
time, the temperature in the freezer will rise above -18ćand food spoilage may occur .
Before use
Remove all securing tapes. Wash the inside of the appliance with lukewarm water added with a little
bicarbonate of soda (5ml to 0.5 liter of water). Do not use soap or detergent since the smell may
linger. After cleaning, dry the appliance thoroughly.
To start the appliance
Operating instructions
1. Allow the appliance to stand for 2 hours after installation.
2. Plug in the appliance and turn on the power.
3. Turn the thermostat control to the required setting. A midway setting is usually suitable for
normal operation.
4. Leave the appliance for approximately 4 hours to reach the correct temperature before placing
food inside.

Cold Colder

10
Important!-Normally we advise you select setting in the middle of Cold and Colder, if you want the
temperature warmer or colder please turn the knob to lower or higher setting accordingly.
Be advised that for maximum efficiency we ask that you set your Freezer settings to suit the ambient
temperature in your area.
.
Important!-
High ambient temperatures (e.g. on hot summer days) and a cold setting on the
temperature regulator (position Max) can cause the compressor to run continuously or even
non-stop!
Reason: when the ambient temperature is high, the compressor must run continuously to maintain
the low temperature in the appliance.
Door Reversal
The side at which the door opens can be changed from the right side (as supplied) to the left side, if
the installation site requires.We recommend 2 people to perform this.
Before you start lean the freezer on its back on a 45 Degree angle. The second person should hold this
into position. In order to gain access to the base, you should rest it on soft foam packaging or similar
material to avoid damaging the cooling pipes at the rear of the refrigerator.
Warning!
When changing the side at which the door opens, the appliance must not be connected to the
mains. Remove plug from the mains beforehand.
1. Remove the cover of
screws, and unscrew the
screw, then remove the
top cover.
2. Remove the decoration of
the top cover, and fix the
decoration on the opposite
side.
3. Unscrew the upper hinge
and remove it
4. Unscrew the upper hinge
pivot and place it on the
opposite side.
5. Remove the door and the
lift upper hinge cover on
the door, and fix it on the
opposite side.