Hisense RB468N4BC2 Mounting instructions

RB468N4BC2
RB403N4AC2
RB403N4DC1

2
This appliance is produced in accordance with the following EU guidelines:
2006/95/EC, 2004/108/EC, 2009/125/EC, EC.643/2009 and 2002/96/EC
For your safety and correct
usage, before installing and
first using the appliance,
read this user m anual
carefully, including its hints
and warnings.
To avoid unnecessary
mistakes and accidents, it is
important to make sure that
all people using the appliance
are thoroughly familiar with its
operation and safety features.
Save these instructions and
be sure that they remain
with the appliance if it is
moved or sold, so that
anyone using it throughout
its life will be properly
informed on usage and
safety notices.
For the safety of life and
property, keep the precautions
of these user's instructions as
the manufacturer is not
responsible for damages
caused by omission.
Safety for children and others
who are vulnerable
This appliance can be used
by children aged from 8
years and above, and
per s o n s with r e d uced
physical, sensory or mental
capabilities or lack of
experience and knowledge if
they have been given
supervision or instruction
concerning use of the
appliance in a safe way and
understand the hazards
involved. Children shall not
play with the appliance.
Cleaning and user
maintenance should not be
carried out by children
without supervision.
Keep all packaging away
from children as there is risk
of suffocation.
Safety and warning information Contents
Contents
Safety and warning information_ _ _ _2
Installing your new appliance_ _ _ _ _7
Description of the appliance_ _ _ _ _12
Display controls_ _ _ _ _ _ _ _ _ _ _ 14
Using your appliance_ _ _ _ _ _ _ _16
Helpful hints and tips_ _ _ _ _ _ _ _18
Cleaning and care_ _ _ _ _ _ _ _ _ _19
Troubleshooting_ _ _ _ _ _ _ _ _ _ _20
Disposal of the appliance_ _ _ _ _ _22
Hisense Refrigerator

3
If you are discarding the
appliance, pull the plug out
of the socket, cut the
connection cable (as close
to the appliance as you can)
and remove the door to
prevent children from
suffering an electric
shock
or from closing
themselves inside.
If this appliance, featuring a
magnetic door seals, is to
replace an older appliance
having a spring lock (latch)
on the door or lid, please
make the spri ng lock
unusable before you
discard the old appliance.
This will reduce the risk
of trapping children or
animals inside.
General safety
WARNING his — T
appliance is designed
to be used in domestic
households and not intended
for use in retail or
commercial environments.
WARNING Do not store —
explosive substances such
as aerosol cans with a
flammable propellant in this
appliance.
WARNING If the supply —
cord is damaged, it must be
replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
WARNING Keep —
ventilation openings in the
appliance enclosure or in
any built-in structure clear
of obstruction.
WARNING Do not use —
mechanical devices or
other means to accelerate
the defrosting process,
other than those
recommended by the
manufacturer.
WARNING Do not —
damage the refrigerant
circuit.
WARNING Do not use —
electrical appliances inside
the food storage
c o m p a r t m e n t s o f t h e
appliance, unless they are
of the type recommended
by the manufacturer.
WARNING The —
refrigerant and insulation
are flammable.
Hisense Refrigerator

4
When disposing of the
appliance, do so only at
an a u t h o r i z e d w a s t e
disposal center. Do not
expose to flame.
Electrical safety
1.The power cord must not
be lengthened.
2.Make sure that the
power plug is not crushed
Refrigerant or damaged. A crushed or
The refrigerant isobutene
(R600a) is contained within
the refrigerant circuit of the
appliance. This is a natural
gas with a high level of
environmental compatibility,
whic h is nev erthe les s
flammable . During
transportation and
installation of the appliance,
ensure that none of the
components of the
refrigerant circuit becomes
damaged.
The refrigerant (R600a) is
flammable.
Caution:risk of fire
If the refrigerant circuit
is damaged:
-Avoid naked flames and
sources of ignition.
-Thoroughly ventilate the
room in which the appliance
is situated.
It is dangerous to alter the
specifications or modify this
product in any way.
Any damage to the cord
may cause a shortcircuit,
fire, and/or electric shock.
damaged power plug may
overheat and cause a fire.
3.Make sure that you can
access the main plug of the
appliance.
4.Do not pull the main
cable.
5.If the power plug socket
is loose, do not insert the
power plug. There is a risk
of electric shock or fire.
6.You must not operate the
a pp l i an c e w i th out the
interior lighting lamp cover.
7.The fridge should only be
supplied with single phase
alternating current of 220 ~
240V / 50Hz . If the supply
fluctuates outside this range
an automatic A.C. voltage
regulator
of more than 350W
should be used. The fridge
should be plugged into an
adequately earthed supply
Hisense Refrigerator

5
Daily use
Do not store flammable
gas
or liquids in the
appliance, there is a risk of
explosion.
Do not operate any
electrical appliances in
the appliance (e.g.
electric ice cream
makers, mixers etc.).
When unplugging always
pull the plug from the
mains socket. Do not pull
on the cable.
Do not place hot items near
the plastic components of
this appliance.
Do not place food products
directly against the air
outlet on the rear wall.
Store pre-packed frozen
food in accordance with the
frozen food manufacture
instructions.
The manufactures storage
recommendations should be
strictly adhered to. Refer to
relevant instructions for
storage.
Do not place carbonated
or fizzy drinks
in the
freezer compartment as it
creates pressure on the
container, which may
Cause it to explode,
resulting in damage to the
appliance.
Frozen food can cause frost
burns if consumed straight
from the freezer compartment.
Do not place the appliance
in direct sunlight.
Keep burning candles,
lamps and other items
with naked flames away
from the appliance
The appliance is only
intended for keeping food a n
d/or beverages for normal
household consumption a s
explained in this instruction
booklet
The appliance is heavy.
Care should
be taken
when moving it.
Do not remove nor touch
items from the freezer
compartment if your hands
are damp/wet, as this could
cause skin abrasions or
frost/freezer burns.
Never use the base,
drawers,
doors etc. to
stand on or as supports.
Frozen food must not be
refrozen once it has been
thawed out.
Hisense Refrigerator

6
To avoid items falling and
causing injury or damage
to the appliance, do not
overload the door racks
or put too much food in
the crisper drawers.
Caution!
Care and cleaning
Before p e rf o rm i n g
maintenance, switch off
the appliance and
disconnect the mains plug
from the mains socket.
Do not clean the appliance
with metal objects, steam
cleaners, ethereal oils,
organic solvents or abrasive
cleansers.
Do not use sharp objects to
remove frost from the
appliance. Use a plastic
scraper.
Installation Important!
For electrical connection
carefully, follow the
instructions given in this
manual.
Unpack the appliance and
check for damage. Do not
connect the appliance if it
is damaged. Report
possible damage
immediately to your
retailer. In this case,
please retain packing.
It is advisable to wait at
least four
hours before
connecting the appliance to
avoid damaging the
compressor.
Adequate air circulation
should be provided
around the appliance. To
achieve sufficient
ventilation. Please follow
the instructions relevant
to installation.
Wherever possible the back
of the product should not be
too close to flammable
materials as some
components are hot in
normal operation.
The appliance must not be
locate close to radiators or
cookers.
Make sure that the mains
plug is accessible following
installation of the appliance.
Service
This product must be
serviced by an authorized
Service Center or Service
Agent, and only genuine
spare parts must be used
Hisense Refrigerator

Installing your new appliance
Ventilation of appliance
●
Before using the appliance for the first
time, the following
tips.
please consider
In order to improve efficiency
of the cooling system and save
energy, it is necessary to maintain
good ventilation around the appliance
dissipation of heat. For this
reason, sufficient clear space should
be available around the refrigerator.
It is advisable for there to be at least
75mm of space from the back to the
wall, at least 100mm from its top,at
last 100mm from its side to the wall
and a clear space in front to allow the
doors to open 135° shown in
following diagrams.
to allow
as
Note:
This appliance performs well within
the climate class showed in the table
below.
75
100
100
100
75
100
100
100
It may not work properly if being left at
a temperature above or below the
indicated range for a long period.
Leveling of appliance
For sufficient leveling and air
circulating in the lower rear section of
the appliance, the bottom feet may
need to be adjusted. You can adjust
them manually by hand or by using a
suitable spanner.
To allow the doors to self-close, tilt
the top backwards by about 10mm.
Climate class Ambient temperature
SN
N
ST
T
+10C to +32C
+16C to +32C
+16C to +38C
+16C to +43C
Stand your appliance in a dry place
to avoid high moisture.
Keep the appliance out of direct
sunlight，rain or frost. Stand the
appliance away from heat sources
such as stoves, fires or heaters.
●
●
●
●●●
●
≤10mm
Installing the door handles
For the convenience of transportation,
the door handles are separately
provided in a plastic bag, you can
install the door handles as follows.
1. Lever screw covers on the left
side of the door, and then put them
back to the plastic bag.
2. Match the handle on the left side of
the door, keeping
screw holes in the handle and the
door in a line, as the picture shows.
out
in
the center of the
3. Fix the handle with the special
screws provided in the plastic
bag. install the handle covers.Then
7
Hisense Refrigerator

Reversing the door
The side at which the door opens can
be changed, from the right side (as
supplied) to the left side, if .
Warning! When reversing the door, the
appliance must not be connected to
the mains. Ensure that the plug is
removed from the mains socket..
Tools you will need
required
8mm socket wrench Cross-shaped screwdriver
8mm wrench
Thin-blade screwdriver
Note:
in order to
gain access to the base, you should
rest it on soft foam packaging or
similar material to avoid damaging
the backboard of the refrigerator. To
reverse the door, the following steps
are generally recommended.
1. Stand the refrigerator upright. Open
the upper door to take out all door
racks (to avoid racks damaged) and
then close the door.
When required the refrigerator
can be tilted backwards
Door racks
2. part ① on top of the
refrigerator body from right side and
then part ③ and part ④ on
the upper door in the same way.
Remove
remove
③Upper cover of upper door
②Upper hinge cover (right)
①Upper cover
④Corner cover
3. Disconnect electrical connector①
as well as electrical connector② and
then part③. remove
12
3
3
2
1
Note: Please hold the upper door by
hand during step 4 to prevent door
dropping.
4. Remove the screws ①, loose
wire②, and remove par③.
Special flange self-tapping
screws
Earth wire
①
②
③part
8
part ② and put it back to
the plastic bag.
Remove in
Hisense Refrigerator

5. Remove the upper door and place it
on a smooth surface with its panel
upwards. Lever part①and part④then
loose screws②, as shown in the
picture. Change handle③to the right
side, then install screws②, part① and
part④ in turn. screws⑦,
detach part⑥ and part⑤ then install
part⑤and another part⑥(in the plastic
bag)to the left side with screws⑦.Put
part⑥ just detached back to plastic
bag.
,
Loosen
in
② Special self-tapping screws
③ Handle
① Handle covers
④ Screw hole covers
⑤ Door holder
⑥ Stop block
⑦ Self-tapping screws
6. screws used to fix the
middle hinge and remove middle
hinge. Then remove the lower door.
Loosen
1 2
1
23
② Special self-tapping screws
③ Handle
① Handle covers
④ Screw hole covers
⑤ Door holder
⑥ Stop block
⑦ Self-tapping screws
12
8. Change screw hole covers on
middle cover plate from left to right (as
shown in figure below).
9. remove
part③ and then loose screws④ .
Remove part ② and part①.
Tilt refrigerator back and
10. Screw out lower hinge
the near hole site, and then
and mount washer.
pin and
move it to
tighten into place
② Front foot fixed board
④ Self-tapping screws
③ Adjustable bottom feet part
① Lower hinge part（right）Note: washer may
stick to lower door.
washer
11. step 9,change part①to
left and part②to right and then fix them
with screws④. Finally install part③.
Referring to
9
7.
surface with its panel upwards.
Change the handle to the right side
according to step 5. Loosen
screws⑦，detach part⑥and part
⑤.Turn part⑤by 180 and then
install part⑤and part⑥to
corresponding position on left side
together with screws⑦.
Place the lower door on a smooth
Hisense Refrigerator

Lower hinge part (left)
Note: washer may
stick to lower door. Washer
12. the lower door and adjust its
position to
upper hinge axis. Turn the middle hinge
by 180, change the washer on the to
the upper side, adjust the middle hinge
to the appropriate position and then
install it.
Fit
pin
locate the door onto the
13. Screw out The upper hinge , turn
the upper hinge over and fix on it.
Then place .
pin
pin
to one side for use later
14. Exchange wires both in the left and
right slots of refrigerator body.
15. Move the upper door to appropriate
position, adjust part① and upper door,
Move the connecting wire② in the slot
of upper door from right to left，and
then fix part①and wire② by screws③.
(Please hold upper door by hand when
installing)
16. Connect electrical connector① in
accordance with step 3 and then install
part②(which is in the plastic bag).
②upper hinge cove r(left)
①
17.Reverse part① by 180°and install it
onto the right corner of upper door，
then mount part②. (both of which
in step 2)
were
removed
18. Take the reed switch out of the
coping block(part③6 in step 3)and
mount it on (which
is “R” in the plastic bag). Put
the coping block just removed back
to the plastic bag.
the additional block
marked
in
10
Hisense Refrigerator