Hitachi CP-DW10N User manual

1
Projector
CP-DW10N
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may
appear in this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.

• Mac®is a registered trademark of Apple Inc.
• Windows®is a registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
• DVI is a trademark of Digital Display Working Group.
• Trademark PJLink is a trademark applied for trademark rights in Japan, the
United States of America and other countries and areas.
• "Blu-ray Disc" is a trademark.
All other trademarks are the properties of their respective owners.
NOTICE This entry notices of fear of causing trouble.

2
Contents
Contents
About this manual...........1
Contents . .................2
Projector features...........3
Preparations ...............3
Checking the contents of package ...3
Fastening the lens cover..........4
Part names . ...............5
Projector . .....................5
Control panel...................6
Rear panel . ...................6
Remote control . ................7
Setting up . ................8
Arrangement ...................8
Connecting your devices.........10
Connecting power supply . .......14
Using the security bar and slot . . . . 14
Remote control ............15
Installing the batteries...........15
About the remote control signal . . . 15
Changing the frequency of remote
control signal . ...............16
Power on/off . .............17
Turning on the power . ..........17
Turning off the power . ..........17
Operating . ...............18
Adjusting the volume............18
Temporarily muting the sound.....18
Selecting an input signal.........18
Searching an input signal . .......20
Selecting an aspect ratio.........20
Adjusting the projector's elevator . . 21
Adjusting the focus . ............21
Using the automatic adjustment feature ...22
Adjusting the position . ..........22
Correcting the keystone distortions ..23
Using the magnify feature........23
Temporarily freezing the screen . . . 24
Temporarily blanking the screen . . 24
Using the menu function . .......25
EASY MENU. . . . . . . . . . . . . . . 27
ASPECT, D-ZOOM, KEYSTONE, PICTURE MODE,
ECO MODE, MIRROR, RESET, FILTER TIME,
LANGUAGE, ADVANCED MENU, EXIT
PICTURE menu . ...........29
BRIGHTNESS, CONTRAST, GAMMA,

COLOR TEMP, COLOR, TINT, SHARPNESS,
MYMEMORY
IMAGE menu . .............32
ASPECT, OVER SCAN, V POSITION, H POSITION,
H PHASE, H SIZE, AUTO ADJUST EXECUTE
INPUT menu . .............34
PROGRESSIVE, VIDEO NR, COLOR SPACE,
VIDEO FORMAT, HDMI FORMAT, HDMI RANGE,
COMPUTER IN, FRAME LOCK, RESOLUTION
SETUP menu ..............38
D-ZOOM, D-SHIFT V, D-SHIFT H,
PICT. POSIT. H,
KEYSTONE,
ECO MODE, MIRROR, STANDBY MODE,
MONITOR OUT
AUDIO menu . .............40
VOLUME, SPEAKER, AUDIO SOURCE,
HDMI AUDIO
SCREEN menu.............41
LANGUAGE, MENU POSITION, BLANK,
START UP,
MyScreen, MyScreen Lock
,
MESSAGE, SOURCE NAME, TEMPLATE, C.C.
OPTION menu . ............47
AUTO SEARCH, DIRECT POWER ON,
AUTO POWER OFF, LAMP TIME,
FILTER TIME, MYBUTTON, MYSOURCE,
SERVICE
NETWORK menu ...........55
SETUP, PROJECTOR NAME, MYIMAGE,
AMX D.D., INFORMATION, SERVICE
SECURITY menu ...........60
SECURITY PASSWORD CHANGE,
MyScreen
PASSWORD, PIN LOCK,
TRANSITION DETECTOR, MYTEXT PASSWORD,
MYTEXT DISPLAY, MYTEXT WRITING
Maintenance ..............66
Replacing the lamp .............66
Cleaning and replacing the air filter ..68
Replacing the internal clock battery
..69
Other care....................70
Troubleshooting . ..........71
Related messages . ............72
Regarding the indicator lamps . . . . 73
Shutting the projector down . .....75
Resetting all settings............75
Phenomena that may be easy
to be mistaken for machine defects ..75
Specifications .............80


3
Projector features / Preparations
Projector features
The projector provides you with the broad use by the following features.
The unique optics system produces a large projected image in a short distance,
which provides you with various ways of use.
The double layer filter system is expected to function longer and offers you less
maintenance frequency.
The HDMI port can support various image equipment which have digital interface to
get clearer pictures on a screen.
This projector can be controlled and monitored via LAN connection.
This projector's network supports the PJLinkTM standard.
PJLinkTM is a unified standard for operating and controlling data projectors.
PJLinkTM enables central control of projectors manufactured by different vendors
and projectors can be operated by a controller. PJLinkTM compliant equipment
can be managed and controlled at any time and in any place, regardless of
manufacturer.
For the command of PJLinkTM, see "Technical".
For specifications of PJLinkTM, see the web site of the Japan Business Machine and
Information System Industries Association.
URL: http://pjlink.jbmia.or.jp
• Keep the original packing materials, for future reshipment. Be sure to use the
original packing materials when moving the projector. Use special caution for the lens.
NOTE
Preparations
Checking the contents of package
Your projector should come with the items shown
below. Check that all the items are included. Require
of your dealer immediately if any items are missing.
(1) Remote control with two AA batteries
(2) Power cord
(3) Computer cable
(4) Lens cover and Strap
(5) User’s manuals (Book x1, CD x1)
(6) Security label
(5)
(6)
(2)
(3)
(1) VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE
MY BUTTON
POSITION
12
ESC
ENTER
MENU
RESET
COMPUTER MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
(4)

4
Projector features / Preparations
Fastening the lens cover
To avoid losing the cover, please fasten the lens
cover to the projector using the included strap.
Put the strap end into the slit of the lens
cover with the knot on the side of the lens.
Make sure that the strap is inserted to the
end of the slit.
Fasten the strap to the strap hole as shown
in the figure for step 1. Please note that the
knot on the strap is used to fasten it to the
lens cover in step 2.
1.
2.
►Do not hang the lens cover in
front of the lens when the projector is mounted
upside down such as when mounted on the
ceiling. Otherwise, the lens cover may block the
light from the projector or hit the lens, which may
cause damage to it. When mounting the projector
upside down, hang the lens cover on the side of the
projector or place it on the projector. For instance,
wrap the strap around the elevator foot to hang the
lens cover (refer to the figure).
CAUTION
Lens cover Strap slit
Strap hole
Strap
1 2

5
Part names
Part names
Projector
(1) Lamp cover (66)
The lamp unit is inside.
(2) Focus ring (21)
(3) Control panel (6)
(4) Elevator buttons (x 2) (21)
(5) Elevator feet (x 2) (21)
(6) Remote sensor (15)
(7) Lens (70)
(8) Intake vents
(9) Filter cover (68)
The air filter and intake vent are
inside.
(10) Speaker (40)
(11) Exhaust vent
(12) AC IN (AC inlet) (14)
(13) Rear panel (6)
(14) Security bar (14)
(15) Security slot (14)
(16) Strap hole (4)
(17) Battery cover (69)
►HOT! : Do not touch around the lamp cover and the exhaust
vent during use or just after use, since it is too hot.
►Do not look into the lens or vent while the lamp is on, since the strong light is
not good for your eyes.
►Do not handle the elevator buttons without holding the projector, since the
projector may drop down.
WARNING
►Maintain normal ventilation to prevent the projector from
heating up. Do not cover, block or plug up the vents. Do not place anything that
can stick or be sucked to the vents, around the intake vents. Clean the air filter
periodically.
►Do not use the security bar and slot to prevent the projector from falling down,
since it is not designed for it.
CAUTION
(5)
(6)
(8)
(7)
(9)
(4)
(10)
HOT!
HOT!
(1) (3)
(12)
(14) (11)
(13)
(2)
(15)
(16)
(17)

6
POWER
TEMP
LAMP
MENU
INPUT
STANDBY/ON
(1) (3)(2) (4)
(6)
(5)
Part names
Control panel
(1) STANDBY/ON button (17)
(2) INPUT button (18, 25)
(3) MENU button (25)
It consists of four cursor buttons.
(4) POWER indicator (14, 17, 73)
(5) TEMP indicator (73)
(6) LAMP indicator (73)
Rear panel (10)
(1) AUDIO IN1 port
(2) AUDIO IN2 port
(3) COMPUTER IN1 port
(4) COMPUTER IN2 port
(5) MONITOR OUT port
(6) Shutdown switch (75)
(7) CONTROL port
►Use the shutdown switch only when the projector is not
turned off by normal procedure, since pushing this switch stops operation of the
projector without cooling it down.
CAUTION
(8) VIDEO port
(9) S-VIDEO port
(10) AUDIO IN3 (R, L) ports
(11) AUDIO OUT (R, L) ports
(12) HDMI port
(13) LAN port
LAN
HDMI
(2)
(3) (4)
(9) (1)(8)
(5)(7) (6)
(10) (11)
(13)
(12)

7
Part names
Remote control
(1) VIDEO button (19)
(2) COMPUTER button (19)
(3) SEARCH button (20)
(4) STANDBY/ON button (17)
(5) ASPECT button (20)
(6) AUTO button (22)
(7) BLANK button (24)
(8) MAGNIFY - ON button (23)
(9) MAGNIFY - OFF button (16, 23)
(10) MY SOURCE/DOC.CAMERA button (19, 49)
(11) VOLUME - button (16, 18)
(12) PAGE UP button *
(13) PAGE DOWN button *
(14) VOLUME + button (18)
(15) MUTE button (18)
(16) FREEZE button (24)
(17) MY BUTTON - 1 button (49)
(18) MY BUTTON - 2 button (49)
(19) KEYSTONE button (23)
(20) POSITION button (22, 26)
(21) MENU button (25)
(22) ▲/▼/◄/► cursor buttons (25)
(23) ENTER button (25)
(24) ESC button (25)
(25) RESET button (25)
(26) Battery cover (15)
Back of
the remote control
(2)
(1)
(6)
(5)
(16)
(8)
(9)
(19)
(17)
(20)
(22)
(24)
(10)
(4)
(3)
(7)
(12)
(14)
(11)
(13)
(15)
(18)
(21)
(23)
(25)
(26)
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE
MY BUTTON
POSITION
12
ESC
ENTER
MENU
RESET
COMPUTER MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
• Any button marked with “*” is not supported on this projector (72).
NOTE

8
Setting up
Install the projector according to the environment and manner the projector will be
used in.
Arrangement
Refer to the illustrations and tables below to determine screen size and projection
distance.
The values shown in the table are calculated for a full size screen: 1280 x 800
a Screen size (diagonal) b Projection distance (±8%)
c1 , c2 Screen height
Setting up
a
c2
c1
b
ac2
c1
b
On a horizontal surface Suspended from the ceiling
• Keep a space of 30 cm or more between the sides of the projector and other
objects such as walls.
• For the case of installation in a special state such as ceiling mount, the
specified mounting accessories (80) and service may be required. Before
installing the projector, consult your dealer about your installation.
• The screen position may shift after installation if the projector is suspended
from the ceiling or other location due to the flexibility of the plastic projector
body. If readjustment is necessary, consult with your dealer or service
personnel.
• The projected image position and/or focus may change during warm-
up (approx. 30 minutes after the lamp is turned on) or when the ambient
conditions change. Readjust the image position and/or focus as necessary.
Screen size
(diagonal)
b
Projection distance
c1
Screen height
c2
Screen height
type(inch) m m inch m inch m inch
60 1.5 0.634 25 0.264 10 1.072 42
70 1.8 0.748 29 0.298 12 1.240 49
80 2.0 0.862 34 0.331 13 1.408 55
90 2.3 0.975 38 0.364 14 1.575 62
100 2.5 1.089 43 0.397 16 1.743 69
a

9
Setting up
►Place the projector in a stable horizontal position. If the
projector falls or is knocked over, it could cause injury and/or damage to the
projector. Using a damaged projector could then result in fire and/or electric
shock.
• Do not place the projector on an unstable, slanted or vibrational surface such
as a wobbly or inclined stand.
• Do not place the projector on its side, front or rear position.
• Consult with your dealer before a special installation such as suspending from
a ceiling or somewhere else.
►Place the projector in a cool place, and ensure that there is sufficient
ventilation. The high temperature of the projector could cause fire, burns and/or
malfunction of the projector.
• Do not place or attach anything that would block the lens or vent holes.
• Keep a space of 30 cm or more between the sides of the projector and other
objects such as walls.
• Do not place the projector on metallic thing or anything weak in heat.
• Do not place the projector on carpet, cushions or bedding.
• Do not place the projector in direct sunlight or near hot objects such as heaters.
Do not place the projector where the air from an air conditioner or similar unit
will blow on it directly.
• Do not place anything near the projector lens or vents, or on top of the projector.
• Do not place anything that may be sucked into or stick to the vents on the bottom
of the projector. This projector has some intake vents also on the bottom.
►Do not place the projector anyplace where it may get wet. Getting the projector
wet or inserting liquid into the projector could cause fire, electric shock and/or
malfunction of the projector.
• Do not place the projector in a bathroom or the outdoors.
• Do not place anything containing liquid near the projector.
►Use only the mounting accessories the manufacturer specified, and leave
installing and removing the projector with the mounting accessories to the
service personnel.
• Read and keep the user’s manual of the mounting accessories used.
WARNING
►Avoid placing the projector in smoky, humid or dusty place.
Placing the projector in such places could cause fire, electric shock and/or
malfunction of the projector.
• Do not place the projector near humidifiers, smoking spaces or a kitchen.
►Position the projector to prevent light from directly hitting the projector's remote
sensor.
►Do not place the product in a place where radio interference may be caused.
►Do not place this product in a magnetic field.
CAUTION
Arrangement (continued)
• The projector may make a rattling sound when tilted, moved or shaken,
since a flap to control the air flow inside of the projector has moved. Be aware that
this is not a failure or malfunction.
NOTE

10
LAN
HDMI
AUDIO OUT RGB OUT
AUDIO OUT
RGB OUT RS-232C RGB IN
Y CB/PBCR/PR
COMPONENT VIDEO OUT
L R
AUDIO OUT
VIDEO OUT L R
AUDIO OUT
L R
AUDIO OUT
S-VIDEO OUT L R
AUDIO IN
HDMI
VCR/DVD/Blu-ray Disc player
Speakers
(with an
amplifier)
PC Monitor
Setting up
Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect. Please refer to the following illustrations
to connect them.

11
►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
WARNING
►Turn off all devices and unplug their power cords prior to
connecting them to projector. Connecting a live device to the projector may
generate extremely loud noises or other abnormalities that may result in
malfunction or damage to the device and the projector.
►Use appropriate accessory or designated cables. Ask your dealer about non-
accessory cables which may be required a specific length or a ferrite core by
the regulations. For cables with a core only at one end, connect the end with
the core to the projector.
►Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.
►Be sure to consult the administrator of the network. Do not connect LAN port
to any network that might have the excessive voltage.
NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
CAUTION
NOTE •
The COMPUTER IN1/2 port can support a component signal also. The specific
adapter or the specific cable is required for a component video input to the projector.
Setting up
Connecting your devices (continued)
To use network functions of the projector, connect the LAN port to the computer's
LAN port.
To use NETWORK BRIDGE function, also connect the CONTROL port and an
RS-232C port of the external device to communicate as a network terminal. See
the User's Manual - Network Guide for details of network functions.
LAN
HDMI
RS-232C
LAN
PC External device

12
Setting up
• Be sure to read the manuals for devices before connecting them to
the projector, and make sure that all the devices are suitable to be connected
with this product. Before connecting to a PC, check the signal level, the signal
timing, and the resolution.
- Some signal may need an adapter to input this projector.
- Some PCs have multiple screen display modes that may include some signals
which are not supported by this projector.
- Although the projector can display signals with resolution up to UXGA
(1600X1200), the signal will be converted to the projector’s panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and the projector panel are identical.
• While connecting, make sure that the shape of the cable's connector fits the
port to connect with. And be sure to tighten the screws on connectors with
screws.
• When connecting a laptop PC to the projector, be sure to activate the PC’s
external RGB output. (Set the laptop PC to CRT display or to simultaneous
LCD and CRT display.) For details on how this is done, please refer to the
instruction manual of the corresponding laptop PC.
• When the picture resolution is changed on a PC depending on an input,
automatic adjustment function may take some time and may not be completed.
In this case, you may not be able to see a check box to select “Yes/No” for the
new resolution on Windows. Then the resolution will go back to the original.
It might be recommended to use other CRT or LCD monitors to change the
resolution.
• In some cases, this projector may not display a proper picture or display
any picture on screen. For example, automatic adjustment may not function
correctly with some input signals. An input signal of composite sync or sync on
G may confuse this projector, so the projector may not display a proper picture.
• The HDMI port of this model is compatible with HDCP (High-bandwidth Digital
Content Protection) and therefore capable of displaying a video signal from
HDCP compatible DVD players or the like.
NOTE
Connecting your devices (continued)

13
Setting up
About Plug-and-Play capability
Plug-and-Play is a system composed of a PC, its operating system and
peripheral equipment (i.e. display devices). This projector is VESA DDC 2B
compatible. Plug-and-Play can be used by connecting this projector to a PC
that is VESA DDC (display data channel) compatible.
• Take advantage of this feature by connecting a computer cable to the
COMPUTER IN1 port (DDC 2B compatible). Plug-and-Play may not work
properly if any other type of connection is attempted.
• Please use the standard drivers in your PC as this projector is a Plug-and-
Play monitor.
Connecting your devices (continued)
NOTE for HDMI
• The HDMI supports the following signals.
-Video signal : 480i@60,480p@60,576i@50,576p@50,720p@50/60,1080i@50
/60,1080p@50/60
-PC signals : See User's Manual(detailed) - Technical
• This projector can be connected with another equipment that has HDMI or
DVI connector, but with some equipment the projector may not work properly,
something like no video.
• Be sure to use an HDMI cable that has the HDMI logo.
• When the projector is connected with a device having DVI connector, use a
DVI to HDMI cable to connect with the HDMI input.

14
Setting up
Connecting power supply
1. Put the connector of the power cord into the
AC IN (AC inlet) of the projector.
2. Firmly plug the power cord’s plug into the
outlet. In a couple of seconds after the
power supply connection, the POWER
indicator will light up in steady orange.
►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one.
• Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
• Never modify the power cord.
WARNING
Using the security bar and slot
A commercial anti-theft chain or wire up to
10 mm in diameter can be attached to the
security bar on the projector.
Also this product has the security slot for
the Kensington lock.
For details, see the manual of the security
tool.
►Do not use the security bar and slot to prevent the projector
from falling down, since it is not designed for it.
WARNING
►Do not place anti-theft chain or wire near the exhaust vent. It
may become too hot.
CAUTION
• The security bar and slot is not comprehensive theft prevention
measures. It is intended to be used as supplemental theft prevention measure.
NOTE
Please remember that when the DIRECT POWER
ON function activated (47), the connection of the
power supply make the projector turn on. AC IN Power cord
Security bar
Security slot
Anti-theft chain or wire

15
Remote control
Remote control
About the remote control signal
The remote control works with the projector’s remote
sensor. This projector has a remote sensor on the front.
The sensor senses the signal within the following range
when the sensor is active:
60 degrees (30 degrees to the left and right of the
sensor) within 3 meters about.
Installing the batteries
Please insert the batteries into the remote control before using it. If the remote control
starts to malfunction, try to replace the batteries. If you will not use the remote control for
long period, remove the batteries from the remote control and store them in a safe place.
1. Holding the hook part of the battery
cover, remove it.
2. Align and insert the two AA batteries
(HITACHI MAXELL, Part No. LR6 or R6P)
according to their plus and minus terminals
as indicated in the remote control.
3.
Replace the battery cover in the direction of the arrow and snap it back into place.
►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
•
Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
•
Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.
WARNING
• The remote control signal reflected in the screen or the like may be available.
If it is difficult to send the signal to the sensor directly, attempt to make the signal reflect.
• The remote control uses infrared light to send signals to the projector (Class 1
LED), so be sure to use the remote control in an area free from obstacles that
could block the remote control’s signal to the projector.
•
The remote control may not work correctly if strong light (such as direct sun
light) or light from an extremely close range (such as from an inverter fluorescent
lamp) shines on the remote sensor of the projector. Adjust the position of
projector avoiding those lights.
NOTE
213
30º 30º Approx.
3 m

16
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE
MY BUTTON
POSITION
12
ESC
ENTER
MENU
RESET
COMPUTER MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
Remote control
Changing the frequency of remote control signal
The accessory remote control has the two choices on signal
frequency, Mode 1:NORMAL and Mode 2:HIGH. If the remote
control does not function properly, attempt to change the
signal frequency.
In order to set the Mode, please keep pressing the
combination of the two buttons listed below simultaneously for
about 3 seconds.
(1)(2)
(1) Set to Mode 1:NORMAL... the VOLUME - and the RESET buttons
(2) Set to Mode 2:HIGH... the MAGNIFY OFF and the ESC buttons
Please remember that the REMOTE FREQ. in the SERVICE
item of the OPTION menu (51) of the projector to be
controlled should be set to the same mode as the remote
control.

17
Power on/off
1. Make sure that the power cord is firmly and
correctly connected to the projector and the
outlet.
Turning on the power
2. Make sure that the POWER indicator is
steady orange (73). Then remove the lens
cover.
3. Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and the POWER
indicator will begin blinking in green. When the power
is completely on, the indicator will stop blinking and light in steady green
(73).
Power on/off
To display the picture, select an input signal according to the section “Selecting an
input signal” (18).
►A strong light is emitted when the projector’s power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector’s openings.
►Do not touch around the lamp cover and the exhaust vent during use or just
after use, since it is too hot.
WARNING
1. Press the STANDBY/ON button on the projector or the remote control. The
message “Power off?” will appear on the screen for about 5 seconds.
Turning off the power
2. Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking
in orange. Then the POWER indicator will stop blinking and light in steady
orange when the lamp cooling is complete (73).
3. Attach the lens cover, after the POWER indicator turns in steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Turning the projector on again too soon could shorten the lifetime of some
consumable parts of the projector.
• Turn the power on/off in right order. Please power on the projector
prior to the connected devices.
•
This projector has the function that can make the projector automatically turn on/
off. Please refer to the DIRECT POWER ON
(47) and the AUTO POWER OFF
(48) items of the OPTION menu.
• Use the shutdown switch (75) only when the projector is not turned off by
normal procedure.
NOTE
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE
MY BUTTON
POSITION
12
ESC
ENTER
MENU
RESET
COMPUTER MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
POWER
TEMP
LAMP
MENU
INPUT
STANDBY/ON
STANDBY/ON button
POWER indicator

18
Operating
Operating
1.
Adjusting the volume
Use the VOLUME +/- buttons to adjust the volume.
A dialog will appear on the screen to aid you in adjusting the
volume. If you do not do anything, the dialog will automatically
disappear after a few seconds.
● When is selected for current picture input port, the volume
adjustment is disabled. Please see the AUDIO SOURCE
item of the AUDIO menu (40).
● When the projector is in the standby state, the volume can be
adjusted if is not selected for the AUDIO OUT STANDBY and the NORMAL
is selected to the STANDBY MODE in the SETUP menu (39).
1. Press the MUTE button on the remote control.
A dialog will appear on the screen indicating that you have
muted the sound.
To restore the sound, press the MUTE, VOLUME + or
VOLUME - button. Even if you do not do anything, the dialog
will automatically disappear after a few seconds.
Temporarily muting the sound
● When is selected for current picture input port, the sound
is always muted. Please see the AUDIO SOURCE item of
the AUDIO menu (40).
● The C.C. (Closed Caption) is automatically activated when sound is muted
and an input signal containing C.C. is received. This function is available
only when the signal is NTSC for the VIDEO or S-VIDEO, or 480i@60 for the
COMPUTER IN1 or COMPUTER IN2, and when the AUTO is selected for the
DISPLAY in the C.C. menu under the SCREEN menu (46).
1. Press the INPUT button on the projector.
Each time you press the button, the projector switches its
input port from the current port as below.
Selecting an input signal
COMPUTER IN1 COMPUTER IN2
VIDEO

S-VIDEO

HDMI
(continued on next page)
VOLUME +/-buttons
MUTE button
● While the ON is selected for the AUTO SEARCH item in
the OPTION menu (47), the projector will keep checking
the ports in above order repeatedly till an input signal is
detected.
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE
MY BUTTON
POSITION
12
MENU
COMPUTER MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE
MY BUTTON
POSITION
12
MENU
COMPUTER MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
ME
N
INPUT
N
DBY/ON
INPUT button

19
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE
MY BUTTON
POSITION
12
MENU
COMPUTER MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
Operating
1. Press the VIDEO button on the remote control.
Each time you press the button, the projector switches its
input port from the current port as below.
Selecting an input signal (continued)
● While ON is selected for AUTO SEARCH item in OPTION
menu, the projector will keep checking every port sequentially
till an input signal is detected (47). If the VIDEO button is
pressed when the COMPUTER IN1 or the COMPUTER IN2
port is selected, the projector will check the S-VIDEO port
first.
S-VIDEO VIDEO
VIDEO button
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE
MY BUTTON
POSITION
12
MENU
COMPUTER MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
MY SOURCE /
DOC. CAMERA button
1. Press the COMPUTER button on the remote control.
Each time you press the button, the projector switches its
input port from the current port as below.
COMPUTER IN1 COMPUTER IN2 HDMI
● While the ON is selected for the AUTO SEARCH item in
the OPTION menu, the projector will keep checking every
port sequentially till an input signal is detected (47). If the
COMPUTER button is pressed when the VIDEO or S-VIDEO
port is selected, the projector will check the COMPUTER IN1
port first.
COMPUTER button
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE
MY BUTTON
POSITION
12
MENU
COMPUTER MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
1. Press the MY SOURCE / DOC. CAMERA button on
the remote control. The input signal will be changed
into the signal you set as the MY SOURCE (49).
● This function also can use for document camera. Select the
input port that connected the document camera.

20
1. Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the
mode for aspect ratio in turn.
Selecting an aspect ratio
● The ASPECT button does not work when no proper signal is inputted.
● The NORMAL mode keeps the original aspect ratio setting.
● The on-screen menu might be displayed outside of the image display
area depending on the adjustment value of the ASPECT, D-ZOOM and
KEYSTONE. Changing the values of ASPECT, D-ZOOM and KEYSTONE
may fix the symptom.
1. Press the SEARCH button on the remote control.
The projector will start to check its input ports as below in
order to find any input signals.
When an input is found, the projector will stop searching
and display the image. If no signal is found, the projector will
return to the state selected before the operation.
Searching an input signal
● While the ON is selected for the AUTO SEARCH item in the OPTION menu
(47), the projector will keep checking the ports in above order repeatedly till
an input signal is detected.
For a computer signal
NORMAL 4:3 16:9 16:10 NATIVE
For an HDMI signal
NORMAL 4:3 16:9 16:10 14:9 NATIVE
For no signal
16:10 (fixed)
SEARCH button
ASPECT button
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE
MY BUTTON
POSITION
12
MENU
COMPUTER MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE
MY BUTTON
POSITION
12
MENU
COMPUTER MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
Operating
COMPUTER IN1 COMPUTER IN2
VIDEO

S-VIDEO

HDMI
For a video signal, s-video signal or component video signal
4:3 16:9 16:10 14:9 NATIVE