Safety, Environmental & Regulatory Information 5 (18)
3 Safety, Environmental & Regulatory Information
The present heading addresses Safety, Environmental & Regulatory Information about the FLB
3203 - 4G (Verizon) extension card.
This extension card belongs to the same compliance frame than the base units. In the present
case of a telecommunication extension card, additional directives, standards and instructions
apply.
3.1 ESD Damage Prevention
Always use ESD precautions when handling extension cards and / or opened base unit as
they contain parts and assemblies susceptible to be damaged by electrostatic discharge
(ESD).
The extension card described in this document is a module exposing both sides of an electronic
printed circuit board. Therefore, it is packed in an antistatic ESD bag. In order to avoid ESD
damage, the product must be handled with the necessary precaution including:
• Grounded ESD protective work surface
• Personnel grounding
3.2 Applicable Directives, Standards and Compliances
The FLB 3203 complies with the FCC regulations related to the wireless modems.
The FLB 3203 belongs to class A Information Technology Equipment (ITE). In a domestic
environment this product may cause radio interference in which case the user may be required
to take appropriate measures.
3.2.1 Applicable Safety Standards
The FLB 3203 is in conformity with the following safety standards:
• IEC / EN 60950-1
• UL 60950-1
• CSA-C22.2 No 60950-1-07
•EN IEC 62368-1:2020 + A11:2020
•UL 62368-1 Third Edition, revised October 22, 2021
•CAN/CSA C22.2 No. 62368-1: 19 Third Edition, revised October 22, 2021
3.2.2 FCC Compliance
The FLB 3203 complies with Part 15B and 27 of the FCC Rules. Operating is subject to the
following two conditions:
• This product may not cause harmful interference
• This product must accept any interference received, including interference that may cause
undesired operation.
FLB 3203 – 4G (Verizon) Extension Card Installation Guide IG-0025-00 1.1 en-US
