Hobie Wave Manual

44 HOBIE WAVE
REPLACEMENT HULL - LEFT 39010001
REPLACEMENT HULL - RIGHT 39020001
CHAIN PLATE 39100011 (PAIR)
SCREW 8030331
ALUMINUM CASTING PINTLES
UPPER PINTLE 38101301
LOWER PINTLE 38101401
LONG LOCK SCREW 8030411
KEEPER WIRE /W PIN 38490011
( CLUB WAVE VERSION–ITEMS LISTED BELOW ONLY IF DIFFERENT FROM STANDARD WAVE MODEL. )
CHAIN PLATE
39100011
‘97–NEWER
(SN 1438-ABOVE)
FORWARD CROSSBAR 38131041
MAST STEP CASTING 38171001
POST (THREADED) 38170001
BALL 50212301
BASE STEP PIN 8020451
‘96–OLDER
MAST STEP CASTING 10170011
MAST STEP LINK KIT 21380001
CLASSIC TRAMPOLINE
3897XXXX
(XXXX = Color / See parts list for
available options)
BLACK FORWARD
END CAP 39130021
TURNING BLOCK H224
EYE STRAP KIT 2072
- EYE STRAP 10076
- SCREW SS010320515
- NUT 8051301
TURNING BLOCK H225
BLACK REAR
END CAP 38190021
REAR CROSSBAR 38191031
CROSS BAR STOP PLATE
38132001
SEAT BACKREST KIT 38040011
BACKREST INSTALLATION QUICK PIN 8020181
BACKREST PLUG, FORWARD 38660011
BACKREST PLUG, AFT 38660031
MAIN TRAVELER KIT (CLUB) 39250000
DRAIN PLUG W/GASKET
91281000
AFTER S/N 1973 USE 10091000
PORT COVER (UNDER SEAT PAD)
38370001
SCREW (NEWER MODELS AND RETROFITS)
8031950
OLDER -
TRAMPOLINE ANCHOR HOOK 38760031
NEWER-
(BOATS WITH TRACKS)
TRAMP TENSION SLIDE 38760071
STOPPER / FOAM 8003255 (FT)
SEAT PAD
LT BLUE 38010061
EYESTRAP
38120011
SCREW
8030331
CLASSIC / SE WAVE
INSERT CAP 38120031
TRAMP TRACK
39341011
CLUB TRAMPOLINE
3997XXXX
(XXXX = Color / See parts list for
available options)
INSPECTION PORT 5”
41370001
BOW SPREADER 38999021
END CAP 38950011
BOW SPREADER TANG 38120041
TRAMP TENSION HOOK
38760061
RING 61290011
TRAMP TENSION
WIRE 38970051
TRAMP TUBE (4 PER
SIDE) 38760021
TRAMP LACE LINE RH014WHT
CENTER - 21’
AFT - 11’ (2)
WAVE VERSION NOTES:
STANDARD WAVE / CLASSIC OR “SE” - (CAR TOPPABLE) ONE PIECE TRAMPOLINE, SHROUDS AND BRIDLES CONNECT WITH HOOKS
CLUB WAVE -THREE PIECE TRAMPOLINE. SHROUDS AND BRIDLES CONNECT WITH CLEVIS PINS
CLUB items listed only if different from standard SE wave model.
CLUB WAVE
HOBIE WAVE
EZ LOC RUDDER PINTLES
UPPER PINTLE 90880211
LOWER PINTLE 90880221
ACCESSORIES
SE LACE ROD 49" 38881011
SE VELCRO LACE STRAP
(4 PER BOAT) 38970061

HOBIE WAVE 45
TILLER CROSS BARS
39521001 CLUB BOLT (62")
39522001 TENDON (62")
39524001 '07 EZ LOC (67")
WAVE CLUB WIRES
SHROUD Club 39790001
FORESTAY 39810001
BRIDLE Club 39822011
WAVE SE WIRES
SHROUD SE w/Hooks 38790001
FORESTAY 39810001
BRIDLE SE w/hooks 38822011
Mast
Head 8010131 (2)
Halyard Hook 8010181 (2)
8011291 (2)
Tang 8010181 (6)
8011291 (6)
Halyard Cleat 8010121 (2)
Base 8010131 (3)
Rear Crossbar
Pad Eye 8010181 )2)
Front Crossbar
Mast Step 8011231 (4)
Rudder Assembly
Upper Casting 8010131 (2)
(Underside) 8011231 (1)
Tiller End Cap 8010131 (2)
Sail
Headboard 8010020 (16)
Tack/Clew plate 8010020 (6)
Pocket Protector 8010020 (4)
(Requires setting machine-not available as
hand tool)
LOWER
BLOCK 38900071
UPPER
BLOCK
38900061
RM516BLU X 35’
“S” HOOK 38900031
SHACKLE 11220000
Wave Rivet Guide ( ) Quantity needed to fasten part
38016001 HOBIE WAVE BATTEN SET
(FOR INDIVIDUAL BATTENS SEE UNIVERSAL BATTENS ON PAGE 14)
BATTEN #5 36”
BATTEN #4 50”
BATTEN #3 66 7/8”
BATTEN #2 77 7/8”
BATTEN #1 82 3/8”
FLOAT KIT 30115
BRACKET (1)
39640020
SCREW 8032011
MAST HEAD
10602111
HALYARD
38651001
COMPTIP
38582100
LUFF TRACK
38584001
TANG
10690000
SHACKLE
10700000
MAIN
SAIL 3899XXXX
TENDON TILLER CONNECTOR
ENDCAP 37561001
FIBER TENDON 37561011
FIBER-TENDON SCREW 8030071
QUICK PIN 8020461
LANYAD 37660091
MAST
SERIAL NUMBER 0 THROUGH 1437
OLD ASSEMBLY NLA (SEE NEW STYLE
BELOW) CONVERSION REQUIRES
MAST STEP RETROFIT.
MAST BASE (HOBIE14 STYLE)
10640011
SERIAL NUMBER 1438 AND NEwER
MAST ASSEMBLY (NEW STYLE)
38581041
LOWER MAST 38583141
NEW MAST BASE (CUP) 38641001
MAST STEP PARTS
(*Conversion parts required to
retrofit new mast to old style boat):
*NEW STEP BALL 50212301
*NEW STEP POST 38170001
*NEW MAST STEP CASTING 38171001
(Flat top / threaded for post)
*RIVET (4) 8011231
*STEP PIN -8020451
TILLER CONNECTOR KITS AND PARTS
1957 KIT - '07 TILLER CONNECTOR
1956 KIT - CLUB TILLER CONNECTOR
(REPLACES TENDON STYLE WITH CLUB BOLT STYLE)
1954 KIT - CLUB TILLER CONNECTOR / UPGRADE FOR EARLY BOATS
WITH ORIGINAL CURVED TENDON CONNECTORS:
INCLUDES TILLER CROSS BAR AND ALL TILLER CONNECTOR FITTINGS
Tiller Arm
39382011
Rudder Linkage
50313201
Tube Rivet
50313301
EZ LOC
RUDDER
BLADE
20491000
EZ LOC Housing 50313001
Detent Plunger 20492021
Retainer Clip 90880231
Bungee (3/16” x 10”) RS316BLK
Lower Bolt 8040321
Washer 8080671
Nut 8050331
eZ loC rudder assemBly
39312000
Upper Bolt 8040391
Nut 8050331
CLUB TILLER CONNECTOR (1954 / 1956)
TILLER CONNECTOR SCREW 40530021
INSERT BEARING 40680001
TILLER ARM INSERT 40660001
BOLT 8040171
WASHER 8080691
TILLER ARM
SWIVEL
END CAP
40650001
'07 TILLER CONNECTOR (1957)
END CAP - WITH PIN 37561203
END CAP - THROUGH HOLE 37561200
CLIP 40590001
SCREW 8031151
RIVET 8010261
SHOCK CORD (10") RS316BLK
TILLER ARM 38321111
RUDDER PIN BUSHING
UPPER 8062001
LOWER 38360001
rudder assemBly
Pre-“EZ LOC” Rudder System
* = SUB ASSEMBLY PART / INCLUDED wITH CASTING
*BOLT
8040301
UPPER CASTING
BLACK
LEFT 50321001
RIGHT 50341001
*WASHER
8080181
BOLT
8040331
NUT
8050311
RUDDER
BLADE
20493000
WHITE
*CAM
10480000
*PIN
50312301
*RAKE ADJUSTMENT SCREW
8032001
*PLUNGER
50312201
*SPRING
10430000
*TENSION SCREW
60450000
LOWER CASTING
BLACK 50322001
*CAM PLATE
203520000
FORESTAY ADJUSTER
20830010
SHROUD ADJUSTER
(CLUB) 20830010
RIGHTING LINE RL012BLU - 15’
DOWNHAUL / HALYARD CLEAT 10730000
SCREW 8030111
NUT 8051301
Up-Lock
pin kit
50314001