Hodedah HI W325 User manual
Hodedah
www.hodedah.com
1
ASSEMBLY INSTRUCTIONS
HI W325 (MOP) ( WINE CABINET )
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT INFORMATION ABOUT ASSEMBLY AND
SAFETY. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
BACK VIEW
FRONT VIEW
~ Keep these instructions for future reference ~
~ Before assembly, please read the instructions ~ ~ Follow these steps to assemble the Wine Cabinet ~
Hodedah
www.hodedah.com
2
- This product contains small components, please ensure that they are
kept away from small children.
-THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION.PLEASE READ AND KEEP FOR FUTURE
REFERENCE.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, email our customer
service. We will gladly ship your replacement parts
FREE of charge.
Need Parts or Assistance?
email us at
For prompt, reliable service; please have your
assembly manual ready.
STOP
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
3
Hodedah
www.hodedah.com
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
C
F
D
H
KJ
LN
MO
P
Lower Partition Panel
2 Pcs.
508 x 392 x 15mm
Q R S
U
Upper Left Side Panel
1 Pc.
1521 x 29 2 x 15mm
Upper Back Panel
2 Pcs.
1462 x 271 x 3mm
Drawer Base Panels
1 Pc.
490 x 271 x 3mm
Lower Stand Panel
9 Pcs.
391 x 112.5 x 15mm
E
G
Top Panel
1 Pc.
514 x 292 x 15mm
Lower Right Side Panel
1 Pc.
368 x 3 94 x 15mm
Table Top
Panel
1 Pc.
549x 425 x 30mm
Upper Back Strrengthen Panel
1 Pc.
514 x 89 x 15 mm
The parts of the product are packed in one box.
There are inner box(es) or package(s) that included components
and accessories required to complete the assembly
Parts
I) Main Unit : II) Back & Drawer :
Lower Back Panels
1 Pcs.
398 x 536 x 3mm
Partition Panel
1 Pc.
514 x 274 x 15mm
Upper Right Side Panel
1 Pc.
1521 x 292 x 15mm
Front Cover Panel
1 Pc.
543 x 89 x 15mm
Adjust Panel
2 Pcs.
514 x 288 x 15mm
Drawer - Front Panels
1 Pcs.
509 x 140 x 15mm
Drawer - Left Side Panel
1 Pc.
267 x 108 x 15mm
IPartition Panel
1 Pc.
514 x 292 x 15mm
TDrawer End Panel
1 Pc.
460 x 108 x 15mm
V
Drawer Panels
1 Pc.
491 x 274 x 15mm
W
Drawer Front Cover Panels
1 Pc.
509 x 64 x 15mm
ABBottom Panel
1 Pc.
549 x 425 x 30mm
Lower Left Side Panel
1 Pc.
368 x 394 x 15mm
Drawer - Right Side Panel
1 Pc.
267 x 108 x 15mm
Hodedah
www.hodedah.com
4
Hardwares And Accessories
IMPORTANT
Check the measure of the bolts on the scale below or with
a measuring tape before applying them in the parts
Observe correctly the application and the position of each bolt
accessory, as the step-by-step instructions, before applying
them in the parts.
010 20 30 40 50 60 70
IMPORTANT!
The required or recommended tools for
assembly are not supplied with the product.
Required Or Recommended Tools
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
Screw M6 x 40mm
14 Pcs.
Screw M4 x 32mm
4 Pcs.
Screw M3.5 x 14mm
8 Pcs.
Mini Fix
8 Sets.
Pvc Dowel
74 Pcs.
Nail
60 Pcs.
Allen Key
1 Pc.
Screw M6.2 x 10mm
8 Pcs.
Drawer Slide - A
2 Pcs.
Drawer Slide - B
2 Pcs.
13 4
10
76
11 12 13 14
Pvc Cap
14 Pcs.
* For # 14 Drawer Slides
* Fix On Side Panels
Ⓖ& Ⓛ
* Fix On Drawer Side
Panels
* For # 13 Drawer Slides
Pvc Cap
16 Pcs.
Sample Screwdriver Sample Hammer Sample Measuring Tape Sample Electric
Screwdriver
Screw M6 x 50mm
8 Pcs.
2
Pvc Cap
8 Pcs.
9Pvc Square Leg
4 Pcs.
Screw M3.5 x 16mm
16 Pcs.
5
* For # 9 Pvc Square Leg
8Shelf Support
8 Pcs.
Hodedah
www.hodedah.com
5
Thank you for purchasing from Hodedah
To learn more about hodedah and our products visit
www.hodedah.com
READ BEFORE BEGINNING ASSEMBLY
-Read each step carefully. It is very important that each step of instruction is performed in the
correct order. If these steps are not followed in sequence, assembly difficulties will occur.
-Make sure all parts are included. Most parts are labelled or stamped on the raw edge.
-Work in spacious area, preferably on a carpet, near the place the unit will be used.
-Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
HELPFUL HINTS
-Call us if you need assistance.
-Move your new furniture carefully, with two people lift and carry the unit to it's new location.
-Never push, drag or pull your furniture (especially on carpet).
Warranty Information
Hodedah warrants this product to be free from defects in material and workmanship agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is
solely limited to be repair or replacement of defective parts and no assembly labor is included.
This warranty does not apply to any product which has been improperly assembled,
subjected to misuse or abuse or which has been altered or repaired in any way.
To obtain warranty service, purchaser must present original bill of sale. Components
repaired or replaced warranted through the remainder of the original warranty
period only. The defective components will be repaired or replaced without charge,
subject to the terms and conditions described above.
For help with assembly,identifying parts, product information or to
order parts, please contact us:
Call us at: Visit our website:
718-456-0505
Monday-Friday www.hodedah.com
9:00am-5:00pm
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
Pre - Assembly
Hodedah
www.hodedah.com
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
6
Place the drawer slide A ⑬
onto the 2 holes area shown
at side panel G and L. Then
tighten it with 2 screws ⑫.
Do the same for the other
slide A ⑬.
Insert 4 support
shelf ⑧into panel
G and L's non
thru holes as
shown.
PANEL G
PANEL L
Insert the mini fix ⑥
(nuts) with the cross
arrow
mark facing upward
and aim to panel G
and L 's front thru
holes. (As shown)
Insert the pvc dowels ⑦,
using hammer to gently tap them in.
PANEL M
PANEL K
Insert the pvc dowels ⑦,
using hammer to gently tap them
in.
Insert, push down and tighten
mini fix screw ⑥, to the panel
M non-thru hole as shown,
2pcs.
6
6
6
6
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
12
13
12
13
PANEL J
7
7
7
7
7
7
PANEL C X 9
Pre - Assembly
Hodedah
www.hodedah.com
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
7
Insert the pvc dowels ⑦,
using hammer to gently tap them in.
Insert the mini fix ⑥
(nuts) with the cross arrow
mark facing upward and
aim to panel A and E 's top
thru holes. (As shown)
PANEL A
PANEL E
PANEL D X 2
Insert, push down and tighten
mini fix screw ⑥, to the panel F
non-thru hole as shown, 2pcs.
PANEL F
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
6
6
6
6
6
6
6
6
PANEL I
PANEL H
Hodedah
www.hodedah.com
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
(1)
Assembly Of Drawer : 1 DRAWER
DRAWER Q
8
(2)
(3)
Insert the minifix ⑥(nuts) with the cross
arrow mark facing downward and aim to
panel R and S 's lower thru holes. (As shown)
Insert the PVC dowels ⑦to end of the
panels R to S. Using hammer to gently tap
them in.
Place panels R and S on each side of panel T
as shown.
Then tighten screw ③to panels R and S 's
upper thru holes to fix them onto panel T.
Insert, push down and tighten mini fix screw ⑥, to the
non-thru hole as shown, 2pcs.
Inserting panels R and S 's lower PVC dowels onto the
upper non-thru holes at panel Q.
Then, tighten mini fix ⑥(nuts) clockwise to lock the mini fix
up for tightening panel R and S to panel Q. Cover 2 mini
fix caps provided by pushing the cover 's stem onto the
hole of mini fix nut on lower side of panel R and S.
Flip drawer with bottom side up, place panel
U onto panels R, S and T and insert panel U
to groove of panel Q.
Then nail the nails ⑩provided with hammer on the
border of panel U as shown.The gap between 2 nails
should be about 100mm.
After that, place drawer slides B ⑭with the small white
roller facing outward and with other end tip touching
panel Q onto each bottom side (angle) edge of panels R
and S.
Then tighten 2 screws ④on each drawer slide B ⑭(as
shown).
(4)
6
6
7
7
33
33
6
6
4
4
4
4
10
Q
R
S
TS
R
U
U
S
S
T
T
(5)
COMPLETED
Q
14
Hodedah
www.hodedah.com
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
(1)
Assembly Of Drawer : 1 DRAWER
9
COMPLETED
V
W
(2)
(3)
Insert the minifix ⑥(nuts) with the cross
arrow mark facing downward and aim to
panel V 's lower thru holes. (As shown)
Insert the PVC dowels ⑦to center of the
panel V. Using hammer to gently tap them in.
Insert, push down and tighten mini fix screw
⑥, to the non-thru hole as shown, 4pcs.
Inserting panel V 's lower PVC dowels onto
the center non-thru holes at panel W.
Then, tighten mini fix ⑥(nuts) clockwise to
lock the mini fix up for tightening panel V to
panel W. Cover 2 mini fix caps provided by
pushing the cover 's stem onto the hole
of mini fix nut on lower side of panel V.
After that, place drawer slides B ⑭with the
small white roller facing outward and with
other end tip touching panel W onto bottom
side (angle) edge of panel V.
Then tighten 2 screws ④on each drawer slide
B ⑭(as shown).
V
6
6
6
6
7
4
4
4
4
14
W
Assembly Instruction Step 1
* Place and fix Panel C onto Panel D by inserting the
dowels onto the thru holes at Panel D.(As Shown)
CAUTIONS : When insert the PVC Dowels to non-thru holes, don't push to hard. Otherwise, the side
panels ( D ) may be damaged.
Hodedah
www.hodedah.com
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
10
CCC
CCC
CCC
D
D
Assembly Instruction Step 2
* Place and fix Panel A and E onto Panel D by inserting the
dowels onto the non-thru holes at Panel A and Panel E.(As Shown)
CAUTIONS : When insert the PVC Dowels to non-thru holes, don't push to hard. Otherwise, the side
panels ( A & E ) may be damaged.
Hodedah
www.hodedah.com
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
11
DD
A
E
Assembly Instruction Step 3
CAUTIONS : When insert the PVC Dowels to non-thru holes, don't push to hard. Otherwise, the side
panels ( A & E ) may be damaged.
Hodedah
www.hodedah.com
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
12
2
11
2
11
2
11
2
11
Screw
M 6 x 50mm
4 Pcs.
2Allen Key
1 Pc.
11
* Place and fix Panel B onto Panel A,C and E by inserting the
dowels onto the non-thru holes at Panel B. (As Shown)
* Using allen key ⑪to tighten screws ②from the 4 thru holes
of panel B , one by one.
A
E
B
CCC
Assembly Instruction Step 4
* Tighten screws ⑤ to the pvc leg ⑨4-thru holes to fix the pvc leg on
Panel B. (As picture shown)
CAUTIONS : When insert the PVC Dowels to non-thru holes, don't push to hard. Otherwise, the side
panels ( A & E ) may be damaged.
Hodedah
www.hodedah.com
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
13
Screw
3.5 x 16mm
16 Pcs.
5Pvc Square Leg
4 Pcs.
9
B
5
9
5
9
9
9
5
5
Assembly Instruction Step 5
* Place and fix Panel H,I,J and K onto Panel G by pushing and slotting the (Left)
dowels onto the non-thru holes at Panel G.
* Using allen key ⑪to tighten screws ①from the 7 thru holes
of panel G , one by one.
CAUTIONS : When insert the PVC Dowels to non-thru holes, don't push to hard. Otherwise, the side
panels ( G ) may be damaged.
Screw
M 6 x 40mm
7 Pcs.
1Allen Key
1 Pc.
11
Hodedah
www.hodedah.com
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
14
H
IJ
K
G
1
11 1
11
1
11
1
11
1
11
1
11
1
11
Assembly Instruction Step 6
* Place and fix Panel H,I,J and K onto Panel L by pushing and slotting the (Right)
dowels onto the non-thru holes at Panel L.
* Using allen key ⑪to tighten screws ①from the 7 thru holes
of panel L , one by one.
CAUTIONS : When insert the PVC Dowels to non-thru holes, don't push to hard. Otherwise, the side
panels ( L ) may be damaged.
Screw
M 6 x 40mm
7 Pcs.
1Allen Key
1 Pc.
11
Hodedah
www.hodedah.com
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
15
L
K
JI
H
1
11
1
11
1
11 1
11
1
11
1
11
1
11
Hodedah
www.hodedah.com
Assembly Instruction Step 7
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
* Place and fix panel M onto panel G,K and L, and align properly by inserting the 2
(down) mini fix screws ⑥onto the L-thru holes at the front edge of panel G and L.
At the same time, inserting panel K front side dowel going onto Panel M 's non-thru
holes.
* Then, tighten mini fix ⑥ clockwise to lock the mini fix up for tightening panel M.
Cover 2 mini fix caps provided by pushing the cover 's stem onto the hole of mini fix
nut on front side of panel G and L.
Screw
M6 x 50mm
4 Pcs.
2
16
Dowel / Mini Fix Installation
* Place and fix panel F onto panel G and
panel L by pushing and slotting the
dowels onto the non-thru holes at Panel F.
* Using allen key ⑪to tighten screws ②
from the 4 thru holes of panel F, one by
one.
Mini Fix Cap
2 Pcs.
6Allen Key
1 Pc.
11
L
G
M
F
K
G
M
CAUTIONS : When insert the PVC Dowels to non-thru holes, don't push to hard. Otherwise, the side
panels ( F & M ) may be damaged.
11
2
2
2
2
11
11
11
Hodedah
www.hodedah.com
Assembly Instruction Step 8
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
Place and fix panel F onto panel A and panel E, and align properly by inserting the 4
(down) mini fix screws ⑥onto the L-thru holes at top edge of panel A
and E. At the same time, inserting panel A,C and panel E 's upside dowels going
onto panel F 's non-thru holes.
Mini Fix Cap
4 Pcs.
6
17
Dowel / Mini Fix Installation
*Then, tighten mini fix ⑥ clockwise to lock
the mini fix up for tightening panel F up.
Cover 4 mini fix caps provided by pushing
the cover 's stem onto the hole of mini fix
nut on upper side of panel A and E.
5E
F
F
A
E
CCC
CAUTIONS : When insert the PVC Dowels to non-thru holes, don't push to hard. Otherwise, the side
panels ( F ) may be damaged.
Hodedah
www.hodedah.com
Assembly Instruction Step 9
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
* Take panel N and place it inside the
top compartment by putting it on the 4
shelf support as shown.
* Take the drawers Q and W and slide
them (The white rollers at drawer slide
at both side of drawers are to go into
the track of the slides at each side
panel.) all the way gently.
18
N
N
W
Q
G
L
Hodedah
www.hodedah.com
Assembly Instruction Step 10
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
* Place the 2 back panel
O onto the back of the
upper main unit. Then
align them properly for
nailing.
* Then use hammer to
nail the nails one by one
and at center of 4 side
edges. Gap between 2
nails should be about
100mm for all.
* Place the back panel P
onto the lower back unit,
align it properly for
nailing.
* Then use hammer to
nail the nails one by one
and at center of 4 side
edges. Gap between 2
nails should be about
100mm for all.
19
Nail
52 Pcs.
10
Hammer
OO
P
10
Hodedah
www.hodedah.com
Assembly Instruction Step 11
H
T
I
M
P
O
R
D
O
H
H
A
D
E
I
20
* Cover all the screws ①'s head with the
PVC cap provided by pushing the
cover's stem onto the hole of screw
head one by one for all screws on panels
G and L.
G
L
Screw Cap
4 Pcs.
1
1
1
1
1
1
1
1
Table of contents
