Hohem iSteady XE User manual

Scan the QR code to
access the tutorial
3-Axis Smartphone Gimbal User Manual V1.0

Warning & Disclaimer
Thank you for purchasing the Hohem product. By using this
product, you hereby signify that you have read this disclaimer
and warning carefully. In addition, you understand and agree to
abide by the terms and conditions herein. You acknowledge that
you are solely responsible for your own conduct while interacting
with this product, and for any consequences thereof. You agree
to use this product only for purposes that are proper and in
accordance with all applicable laws, rules, and regulations, and
all terms, precautions, practices, policies and guidelines Hohem
has made and may make available. Hohem accepts no liability
for damage, injury, or any legal responsibility incurred directly
or indirectly from the use of this product. The user shall observe
safe and lawful practices including, but not limited to, those set
forth in this document.
This document and all other collateral documents are subject to
change at the sole discretion of Hohem. For up-to-date product
information, visit www.hohem.com and click on the product
page for this product.
Email
[email protected]
Website
www.hohem.com
Manufacturer
Hohem Technology Co., Ltd
Hohem Technology Co., Ltd
Connect us at
Facebook

01EN
Scan the QR code or search "Hohem Joy" in APP Store or Google
Play to download.
* The app Hohem Joy requires iOS 10.0 or later, and Android 6.0 or
later.
Download APP—Hohem Joy
For More Interesting Functions
○ Items marked "*" are optional accessories which are sold
separately.
○ Mount your mobile phone before powering on iSteady XE.
○ If no mobile phone is detected or the motor is overloaded
because phone is not balanced well, the gimbal will shut down
after a warning beeping.

iSteady XE Overview
❶ Magnetic Fill Light*
❷ Phone Clamp
❸ Folding Lock A
❹ Folding Lock B
❺ Working Mode Indicator
(Battery Level Indicator)
❻ Zoom Slider
❼ Shutter Button
❽ Tilt Motor
❾ Knob
❿ Pan Motor
⓫ Bluetooth Light
⓬ Joystick
⓭ Function Button
⓮ M Button(Power Button)
⓯ USB-C Charging Port
⓰ 1/4"-20 UNC Port
⓱ Roll Motor
⓲ Handle(Battery Built-in)
⓳ Lanyard Hole
❶ M Button (Turn on/o󽗿 󽘀ll light)
Press and hold for 3s: Turn on/o󽗿 the 󽘀ll light
Press once: Cold/warm/natural the white light
switch
❷ Plus "+" Button
Single press to increase brightness in ten levels
❸ Minus "-" Button
Single press to decrease brightness in ten levels
❹ Fill Light Indicator
("C" is short for cold; "W" is short for warm.)
C indicator lighting alone: Cold light in use
W indicator lighting alone: Warm light in use
C&W indicators both lighting: Natural white
light in use
❺ Power Indicator
Flashing red: Charging
Solid red: Fully Charged
iSteady XE Magnetic Fill Light
Cold Light / Warm Light / Natural White Light (10-Level Adjustable Brightness)
*Sold separately
❹
❺
❻
❸
❷
*❶
❽ ⓱
⓲
⓳
❾
❿
⓫
⓭
⓬
❼
⓰
⓮
⓮
⓯
❹
❸
❷
❺
❶
02EN

How to mount and balance a mobile phone on a
gimbal?
❶ Expand iSteady XE ❷ Tighten the knob by
turning it clockwise.
❸ Make sure that the phone camera is
on the left side of the clamp. Insert your
mobile device by putting it stuck in the
bottom of phone clamp and pulling the
top side of the clamp to clip it into place.
❹ Slide the phone and keep
it clamped and balanced
centrally before powering on.
Power on & Bluetooth Connection
❶ Power on
Press and hold the M Button(Power ON/OFF
Button) for 3s
❷ Bluetooth connection through the App
Enable Bluetooth on your smartphone
Launch the App Hohem Joy and follow the
prompts to connect iSteady XE device.
03EN
Ensure your phone is centrally clamped to the rubber pads, otherwise the
gimbal would vibrate or turn o󽗿 automatically.
The gimbal would not function properly if the knob was not tightened.