Hohem iSteady Mobile User manual

3-Axis Handheld Stabilizing Gimbal
for Smartphone
Product Overview
1
6
1
7
3
5
4
2
9
8
12
7. Pan Motor
8. Mode Light
9. Joystick
10. Mode Button
11. ON/OFF (Shutter Button)
12. Handle ( Battery inside)
10
11
1. Roll Motor
2. 1/4 Inch Extension Screw Hole
3. Bluetooth Light
4. Zoom In/ Zoom Out
5. 1/4 Inch Extension Screw Hole
6. Tilt Motor
Panning 640°
Slide arm
Charging Port
Power Indicator Light
1/4 Inch Extension
Screw Hole

⚫Accessories List
Micro USB Cable*1
Tripod*1
Carry Case*1
User Manual (Includes warranty card)*1
1、Installation Instruction
Install the ‘Hohem Studio’ App
Search for ‘Hohem Studio’ in the App Store or Google Play,
and install the app on your mobile phone.
*‘Hohem Studio’ supports iOS 9.0 and Android 8.0 or above
2.Stabilizer Charging& Smartphone Charging
Fully charge the stabilizer before using it for the first time.
Using the standard USB cable connecting to the stabilizer charging port (or other power
sources)
a. 4 Led lights indicators
4 Led lights on means power is 100%
3 Led lights on means power is 75%
2 Led lights on means power is 50%
b.Indicator Light Fast Flashing: Charging status
c.Indicator Light Solid: Fully charged status
*the charging time is about 4 hours while directly charging from the wall charger
a. USB Port: Charging the stabilizer
b. Micro USB Port: Charging the smartphone

3. Mount the Smartphone
Please make sure the gimbal is turned off before mount the phone, and we suggest remove
the phone case.
（1）Push and open the phone clamp, insert the smartphone until the home button
side as close as possible against to the tilt motor.
NOTE: The phone Home button side must be placed closed to the tilt motor and ensure
it is fixed tightly in order to avoid the gimbal shaking.
（2）Manually rotate the phone clamp to make the phone in vertical shooting.

4.Balance the Smartphone
5、Operation Instruction
MMode Button Operation
Work Modes
Mode Light
Instruction
Single Click
Pan Following
Flash for once
(Quick flash)
Default mode, tilt & roll axis both locked, camera
can move to left or right smoothly.
Double Click
Pan& Tilt Following
Flash for twice
Roll axis locked, camera can move to left/right, and
tilt up/down.
Triple Click
All Locked
Flash for triple
The camera stays in its current orientation.
Quartic Click
All Following
Flash for once
(Slow flash)
Tilt axis, roll axis and pan axis all follow
Long Press For
6 Seconds
Calibration
Solid on
Tilt or roll angle not leveled with horizontal surface,
or pan angle drift in lock mode.
To adjust the smartphone
gravity center by sliding
arm until it keeps balance
on the tilt axis to ensure
the best stabilizing status
and enduration time
Panning right/ left
Tilting up/ down
ON/OFF(Long press for 3 seconds)
Shutter Button: Single Press：Take photo（Bluetooth is connected）
Double Press：Start video（Bluetooth is connected）
Zoom in/ out& Focus
(Setting in the App)
Mode Button

6、APP Guideline
1、Enable the Bluetooth on the mobilephone
For iPhone, please off “Portrait Orientation”
For Android phone, please enable “Auto-rotate screen”
2、Open the App, choose the product model then confirm into Bluetooth connection
It’s the better to connect Bluetooth in the APP,
rather than setting in mobile phone
3、Make sure the gimbal indicator keeps on.
Smart Shooting Mode
1. Smart tracking shooting:
Auto-face tracking shooting
Focus object then auto-tracking shooting
2. Single click for 180°/360°panorama
3. Motion timelapes
* For more functions such as one key to upgrade firmware and calibration, please refer to the user
guide of APP
7、Parameters
Hohem Studio

Dimension(mm)
Material
High strength composite material
Weight
472g
Tilt Rotate Range
320°
Roll Rotate Range
320°
Pan Rotate Range
640°
Angle Vibration Range
±0.01°
Working Voltage
3.2V~4.0V
Battery& Working time
Li-ion battery, 4000mAh, 12 hours
Compatible Smartphone
Size
2.3”-3.4” width range, from iPhone 5 to iPhone 8 plus, iPhone X,
Samsung, Huawei and more Android phones up to 6” screen
10、Calibration
⚫If the gimbal has the following situations, please calibrate it:
①The pitch angle is not leveled with the horizontal surface.
②The roll angle is not parallel to the horizontal surface.
③Under the lock mode, the panning angle drifting.
⚫Calibration Operation Instruction ：
Method 1：Off-line Calibration
(1) Power on the gimbal(around 3 seconds), long press the mode button over 6 seconds till
the mode light is solid.
(2) Lay the gimbal on a static flat surface; make sure it has no shaking. Calibration is finish
when the mode light is continuously flashing for 3 times.
77.4
113.3
307.1
176.8
113.4

(3) Power off the gimbal and restart it, if the calibration is unsuccessful, you can repeat
step (1)(2) to reinitialize.
Method 2：6-Side Calibration Via App
Please ensure the stabilizer is connected with App via Bluetooth, then enter “Calibration”
and follow the tips to calibrate in the App.
11、Firmware Upgrade
Please ensure the stabilizer is connected with App via Bluetooth, then enter the “Firmware
Upgrade” and follow the tips to upgrade the latest firmware
12、DISCLAIMER
Please install and use the product according to the manual!
Please reconfirm the gimbal and the smartphone are well installed before power on!
Keep the stabilizer away from fire and heat source!
Prohibit any user for any illegal purpose. Users will be responsible for all behavior of
purchasing and using the products.
For any unknown sources or usage, we will not provide any service.
If there is any question, please contact the technician of Hohem Tech, we won’t be
responsible for any wrong operations by users.
Hohem Tech reserves the right for final explanation.
Federal Communication Commission (FCC) Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement, The device can be used in
portable exposure condition without restriction Federal Communication Commission (FCC)
Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications or changes to this equipment. Such modifications or changes could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐Consult the dealer or an experienced radio/TV technician for help.