Hoist Fitness ROC-IT RPL-5305-A User manual

Fax
FaxFax
Fax
[phone]
[phone](858) 578-7676
[phone]
[phone]
[phone](858) 578-9558
[phone]
Customer Service
Customer ServiceCustomer Service
Customer Service
[phone]
[phone](800) 548-5438
[phone]
RECORD SER AL NUMBER HERE
RECORD SER AL NUMBER HERERECORD SER AL NUMBER HERE
RECORD SER AL NUMBER HERE
MACH NE CODE
MACH NE CODEMACH NE CODE
MACH NE CODE
**WARNING!**
TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE
EXERCISE FLOOR USING MINIMUM 4-1/2" LONG BOLTS. FAILURE
TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.
Note: Both Serial Number and Model Number are Required when Ordering Parts
Note: Both Serial Number and Model Number are Required when Ordering PartsNote: Both Serial Number and Model Number are Required when Ordering Parts
Note: Both Serial Number and Model Number are Required when Ordering Parts
OWNER'S MANUAL
OWNER'S MANUAL OWNER'S MANUAL
OWNER'S MANUAL
A08
A08A08
A08
RPL-5305-A
PLATE-LOADED DECLINE CHEST PRESS

02
04
26
28
29
30
33
36
37
38
40
41
42
43
44
EXERCISE LOG......................................................................
OWNER'S MANUAL
PAGE 01 RPL-5305-A ASSEMBLY
LIMITED WARRANTY............................................................
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
MACHINE ADJUSTMENT .....................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
BOLT SIZING CHART............................................................
WASHER SIZING CHART......................................................
MAINTENANCE SCHEDULE.................................................
GENERAL MAINTENANCE INFORMATION........................
WEIGHT TRAINING TIPS.......................................................
CONTENTS

OWNER'S MANUAL
PAGE 02
RPL-5305-A ASSEMBLY
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
Two People
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
INSTRUCTIONS

***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
OWNER'S MANUAL
PAGE 03 RPL-5305-A ASSEMBLY

OWNER'S MANUAL
PAGE 04
RPL-5305-A ASSEMBLY
FRAME ASSEMBLY

58
81
65
24
65
89
10
9
30
15
57
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- HAND TIGHTEN HARDWARE.
FRAME ASSEMBLY
NOTE:
PAGE 05
OWNER'S MANUAL
RPL-5305-A ASSEMBLY

56
64
16
64
76
16
76
88
64
56
64
20
88
68
64
111
68
109
109
110
110
64
111
- WRENCH TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
RPL-5305-A ASSEMBLY
OWNER'S MANUAL
PAGE 06

24
78
64
19
64
88
38
70
20
- WRENCH TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
PAGE 07
OWNER'S MANUAL
RPL-5305-A ASSEMBLY

FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
RPL-5305-A ASSEMBLY
OWNER'S MANUAL
PAGE 08
89
82
65
21
20
65

65
81
20
65
89
65
65
82
89
27
21
STEP 1
REMOVED FOR CLARITY.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
FRAME ASSEMBLY
PAGE 09
OWNER'S MANUAL
RPL-5305-A ASSEMBLY
26
86
65
65
89
27
STEP 2

FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
OWNER'S MANUAL
RPL-5305-A ASSEMBLY PAGE 10
9
83
65
14
65
89
44
65
89
65
83
24
10

- HAND TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 11 RPL-5305-A ASSEMBLY
65
89
85
65
14

10
65
89
43
65
82
9
HAND TIGHTEN HARDWARE.
- WRENCH TIGHTEN ALL PREVIOUSLY
FRAME ASSEMBLY
- WRENCH TIGHTEN HARDWARE.
NOTE:
RPL-5305-A ASSEMBLY
OWNER'S MANUAL
PAGE 12

74 74
64
11
64
88
64
88
13
64
88
64
74
25
64
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
NOTE:
OWNER'S MANUAL
PAGE 13 RPL-5305-A ASSEMBLY

- WRENCH TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
RPL-5305-A ASSEMBLY
OWNER'S MANUAL
PAGE 14
65
25
24
86
65
89

84
84
65
25
17
65
89
65
89
20
17
65
- WRENCH TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 15 RPL-5305-A ASSEMBLY

- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
NOTE:
RPL-5305-A ASSEMBLY
OWNER'S MANUAL
PAGE 16
24
89
48
23
22

WARNING - CABLE BOLT MUST BE THREADED
A MINIMUM OF 3/8" WITH JAM NUT TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.
NOTE:
BE SURE CABLE RUNS
BETWEEN THE PULLEYS
AND THE GUARD PINS,
AS SHOWN.
1- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
NOTE:
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
PAGE 17
OWNER'S MANUAL
RPL-5305-A ASSEMBLY
1
93 15/16" 2387
64
1
26
105
JAM NUT
18
41
41
18
21
64
88
CABLE BOLT
JAM NUT.
BOLT IN/OUT TO GIVE THE CABLE
PROPER TENSION. RE-TIGHTEN
FINE TUNING:
LOOSEN JAM NUT AND THREAD
79
18
JAM NUT
105
CABLE BOLT

10
61
64
68
77
9
68
47
108
109
64
111
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
RPL-5305-A ASSEMBLY
OWNER'S MANUAL
PAGE 18

- WRENCH TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 19 RPL-5305-A ASSEMBLY
8
63
104
71
2