Hoist Fitness RPL-5102 User manual

Customer Service
OWNER'S MANUAL
0308 - 000
Fax
[phone]
[phone]
[phone]
Note: Both Serial Number and Model Number are Required when Ordering Parts
RECORD SERIAL NUMBER HERE
CATALOG NUMBER
PLATE LOADED PREACHER CURL
RPL-5102
**WARNING !**
TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE
EXERCISE FLOOR. FAILURE TO DO SO MAY RESULT IN SERIOUS
INJURY OR DEATH.

PAGE 01
OWNER'S MANUAL
INSTRUCTIONS .....................................................................
RPL-5102 ASSEMBLY
FRAME ASSEMBLY ..............................................................
MACHINE ADJUSTMENT .....................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
BOLT SIZING CHART............................................................
WASHER SIZING CHART......................................................
MAINTENANCE SCHEDULE.................................................
GENERAL MAINTENANCE INFORMATION........................
WEIGHT TRAINING TIPS.......................................................
CONTENTS
LIMITED WARRANTY............................................................
EXERCISE LOG......................................................................
02
04
31
32
33
34
37
40
41
43
45
46
47
48
49

PAGE 02
OWNER'S MANUAL
assembly instructions to locate any possible errors made during assembly.
RPL-5102 ASSEMBLY
If you are unable to correct the problem, call your authorized HOIST dealer.
ensure correct operation. If you experience problems, first recheck the
INSTRUCTIONS
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
Ratchet Wrench
Two People
Hex Key Wrench Set
TOOLS REQUIRED
Level
Tape Measure
Rubber Mallet
Adjustable Wrench
1/2", 9/16" and 3/4" Sockets
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to

PAGE 03
OWNER'S MANUAL
RPL-5102 ASSEMBLY
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***

PAGE 04
OWNER'S MANUAL
RPL-5102 ASSEMBLY
FRAME ASSEMBLY

NOTE:
BE SURE THE CABLE (20) RUNS
BETWEEN THE PULLEYS (29, 30)
AND THE GUARD RODS AS SHOWN.
29
30 30
29 29
20
BOTTOM SECTION VIEW
NOTE:
REMOVED FOR CLARITY.
PAGE 05
CABLING PROFILE VIEW
RPL-5102 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
- SOME PARTS MAY HAVE BEEN
20
30
GUARD RODS
30
29
20
29

OWNER'S MANUAL
RPL-5102 ASSEMBLY PAGE 06
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
FRAME ASSEMBLY
53
77
78 54
4
53
67
29
8
GUARD RODS
20
NOTE:
BE SURE TO POSITION THE
CABLE (20) BETWEEN THE
GUARD RODS AS SHOWN.
20
133 1/4" 3385

PAGE 07
OWNER'S MANUAL
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
FRAME ASSEMBLY
RPL-5102 ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
PULLEY (29) AS SHOWN.
67
53
53
77
20
29
29
BE SURE TO POSITION
CABLE (20) BETWEEN
8

30
20
53
77
8
53
68
30
RPL-5102 ASSEMBLY PAGE 08
FRAME ASSEMBLY
- WRENCH TIGHTEN HARDWARE.
NOTE:
OWNER'S MANUAL
- INSTALL CABLE AND PULLEYS AT THE
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
SAME TIME.
GUARD RODS
20
30
BE SURE TO POSITION CABLE
(20) BETWEEN THE PULLEY (30)
AND THE GUARD RODS AS SHOWN.

OWNER'S MANUAL
PAGE 09
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
RPL-5102 ASSEMBLY
NOTE:
FRAME ASSEMBLY
47
8
9
11