Holland Green Science Antidrastiras DS150 User manual

User Manual
Version 1.0 1
20520006
Antidrastiras DS150
Stainless Steel Reactor
User Manual

User Manual
Version 1.0 2
I. Disclaimer & Warranty .................................................................................................. 3
LIMITED WARRANTY & DISCLAIMER .................................................................................... 3
LIMITATION OF LIABILITY....................................................................................................... 6
II. Safety ............................................................................................................................. 7
III. Stainless Steel Reactor Introduction ........................................................................... 9
3.1 After Sales Support.....................................................................................................10
3.2 Proper Use .................................................................................................................10
IV. Technical Specifications..............................................................................................11
4.1 Characteristics...............................................................................................................11
V. Standards and Conformity...........................................................................................12
VI. Inspection.....................................................................................................................13
6.1 Packing List ................................................................................................................13
VII. Operating Instructions.................................................................................................14
VIII. Pneumatic driven stirring system (optional)..................................................................15
IX. Maintenance and Cleaning................................................................................................15

User Manual
Version 1.0 3
I. Disclaimer & Warranty
•The intellectual property rights for this manual belong to Holland Green Science
Corporation (hereinafter referred to as “the Company”).
•Products of the company are under the patent protection of China and other
countries and regions (inclusive of obtained patents and patents currently under
application).
•The company reserves the right to change product specifications without notice.
•The contents of the manual are subject to change without notice.
•The manual’s content must not be copied, extracted, or modified in any form without
the Company’s permission.
LIMITED WARRANTY & DISCLAIMER
Products sold by the Company are intended solely for the use(s) specified by the manufacturer
and are not to be used for any other purposes including, but not limited to, unauthorized
commercial purposes. Buyer warrants and represents that Buyer will properly test, use, qualify,
and/or validate each Product for intended use, and, to the extent authorized, manufacture and
market any final articles made from the Company’s Products in accordance with the practices of
a reasonable person who is an expert in the field, and in strict compliance with all applicable
national, state and local laws and regulations. Buyer acknowledges and understands that the
purchase of Products only conveys to Buyer the non-transferable right for only the Buyer to use
the Products purchased in compliance with the applicable manufacturer's Published User
Statement, Limited User Statement, or Limited License, if any. While this manual contains
certain representations of the potential dangers from the instrument or equipment, Buyer is
solely responsible for conducting any research necessary to learn the hazards involved for any
of its intended uses of the instrument or equipment purchased from the Company and to
properly warn its customers, employees and other personnel who may be exposed to such
instrument or equipment of any risks involved in using or handling the instrument or equipment.
The Company warrants that this product will operate or perform substantially in conformance
with the Company’s published specifications and be free from defects in material and
workmanship, when subjected to normal, proper and intended storage and usage by properly
trained personnel, for the duration of the manufacturer’s warranty period set forth in this product
documentation, published specifications or package inserts. If a manufacturer’s warranty period
is not specified in the product documentation, published specifications or package inserts, the
warranty period shall be one (1) year from the date of Bill of Sale to Buyer for equipment, and
the earlier of any stated expiration dates or ninety (90) days for all other products (the "Warranty
Period"). The Company agrees during the Warranty Period, to repair or replace, at the
Company’s option, defective Products so as to cause the same to operate in substantial
conformance with said published specifications; provided that Buyer shall (a) promptly notify the

User Manual
Version 1.0 4
Company in writing upon the discovery of any defect, which notice shall include the product
model and serial number (if applicable) and details of the warranty claim; and (b) after the
Company's review, the Company will provide Buyer with service data and/or a Return Material
Authorization ("RMA"), which may include biohazard decontamination procedures and other
product-specific handling instructions, then, if applicable, Buyer may return the defective
Products to the Company with all costs prepaid by Buyer. Replacement parts may be new or
refurbished, at the election of the Company. All replaced parts shall become the property of the
Company. Shipment to Buyer of repaired or replacement Products shall be made in accordance
with the Delivery provisions of the Terms & Conditions agreed to by the purchase of this
product. Consumables are expressly excluded from this warranty.
Notwithstanding the foregoing, Products supplied by the Company but not manufactured by the
Company are not warranted by the Company, and the Company disclaims all warranties
associated with the accuracy of any original manufacturer or third-party supplier Product
information, but the Company agrees to assign to Buyer any warranty rights in such Product
that the Company may have from the original manufacturer or third-party supplier, to the extent
such assignment is allowed by such original manufacturer or third-party supplier.
In no event shall the Company have any obligation to make repairs, replacements or corrections
required, in whole or in part, as the result of (i) normal wear and tear, (ii) accident, disaster or
event of force majeure, (iii) misuse, fault or negligence of or by Buyer, (iv) use of the Product in
a manner for which they were not designed, (v) causes external to the Product such as, but not
limited to, power failure or electrical power surges, (vi) improper storage and handling of the
Product or (vii) use of the Product in combination with equipment or software not supplied by the
Company. If the Company determines that Product for which Buyer has requested warranty
services are not covered by the warranty hereunder, Buyer shall pay or reimburse the Company
for all costs of investigating and responding to such request at the Company's then prevailing
time and materials rates. If the Company provides repair services or replacement parts that are
not covered by this warranty, Buyer shall pay the Company therefor at the Company's then
prevailing time and materials rates.
ANY INSTALLATION, MAINTENANCE, REPAIR, SERVICE, RELOCATION OR ALTERATION
TO OR OF, OR OTHER TAMPERING WITH, THE PRODUCT PERFORMED BY ANY
PERSON OR ENTITY OTHER THAN THE COMPANY WITHOUT THE COMPANY'S PRIOR
WRITTEN APPROVAL, OR ANY USE OF REPLACEMENT PARTS NOT SUPPLIED BY THE
COMPANY, SHALL IMMEDIATELY VOID AND CANCEL ALL WARRANTIES WITH RESPECT
TO THE PRODUCT.
THE OBLIGATIONS CREATED BY THIS WARRANTY STATEMENT TO REPAIR OR
REPLACE A DEFECTIVE PRODUCT SHALL BE THE SOLE REMEDY OF BUYER IN THE

User Manual
Version 1.0 5
EVENT OF A DEFECTIVE PRODUCT. EXCEPT AS EXPRESSLY PROVIDED IN THIS
WARRANTY STATEMENT, THE COMPANY DISCLAIMS ALL OTHER WARRANTIES,
WHETHER EXPRESS OR IMPLIED, ORAL OR WRITTEN, WITH RESPECT TO THE
PRODUCTS, INCLUDING WITHOUT LIMITATION ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR USE. THE
COMPANY DOES NOT WARRANT THAT THE PRODUCTS ARE ERROR-FREE OR WILL
ACCOMPLISH ANY PARTICULAR RESULT.
NOTHING IN THIS MANUAL OR IN THE TERMS AND AGREEMENT AGREED TO AT THE
TIME OF PURCHASE SHALL BE CONSTRUED TO PROVIDE FOR THE TRANSFER,
ASSIGNMENT OR ALIENATION OF THE LIMITED WARRANTIES PROVIDED BY THE
COMPANY HEREIN TO ANY OTHER PARTY OTHER THAN BUYER, INCLUDING BUT NOT
LIMITED TO, SUCCESSORS, HEIRS, SUBSIDIARIES OR ANY OTHER THIRD PERSON.
THE WARRANTIES IDENTIFIED ABOVE ARE THE SOLE AND EXCLUSIVE WARRANTIES
WITH RESPECT TO THIS PRODUCT AND ARE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. ALL OTHER WARRANTIES ARE EXPRESSLY DISCLAIMED,
INCLUDING, WITHOUT LIMITATION, THOSE OF NON-INFRINGEMENT,
MERCHANTABILITY, OR FITNESS FOR A SPECIFIC PURPOSE OR USE (WHETHER
ARISING FROM STATUTE, OR OTHERWISE IN LAW, OR FROM A COURSE OF DEALING,
OR USAGE OF TRADE). THIS WARRANTY IS NOT TRANSFERABLE FROM THE ORIGINAL
PURCHASER TO A SUBSEQUENT OWNER. FURTHER, THE COMPANY IS NOT LIABLE IN
CASES OF DELIBERATE, NEGLIGENT OR ACCIDENTAL MISUSE OF THE PRODUCTS,
USE WITH INAPPROPRIATE REAGENTS OR CONSUMABLES, DAMAGE CAUSED BY
DISASTER, REPAIR OR MODIFICATIONS DONE BY ANYONE OTHER THAN THE
COMPANY. THE COMPANY DOES NOT WARRANT THAT THE PRODUCT WILL NOT
INFRINGE THE INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY EITHER ALONE
OR IN COMBINATION WITH OTHER PRODUCTS OR IN THE OPERATION OF ANY
PROCESS. THE COMPANY’S TOTAL LIABILITY FOR BREACH OF THESE WARRANTIES
SHALL BE LIMITED TO THE GROSS PURCHASE PRICE FOR THE PRODUCT AS STATED
IN THE RELEVANT INVOICE OR ORDER UNDER WHICH THE ACTIVITY GIVING RISE TO
LIABILITY ARISES. UNDER NO CIRCUMSTANCES SHALL THE COMPANY BE LIABLE FOR
INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES
(INCLUDING LOSS OF BUSINESS OR PROFITS) UNDER ANY THEORY OF LIABILITY
HEREUNDER.
For claims under the warranty please contact your local supplier. You may also send the
instrument directly to manufacturer, enclosing the invoice copy and by giving reasons for the
claim.

User Manual
Version 1.0 6
LIMITATION OF LIABILITY
NOTWITHSTANDING ANYTHING TO THE CONTRARY CONTAINED HEREIN, THE
LIABILITY OF THE COMPANY UNDER THESE TERMS AND CONDITIONS (WHETHER BY
REASON OF BREACH OF CONTRACT, TORT, INDEMNIFICATION, OR OTHERWISE, BUT
EXCLUDING LIABILITY OF THE COMPANY FOR BREACH OF WARRANTY (THE SOLE
REMEDY FOR WHICH SHALL BE AS PROVIDED UNDER THIS SECTION) SHALL NOT
EXCEED AN AMOUNT EQUAL TO THE LESSER OF (A) THE TOTAL PURCHASE PRICE
THERETOFORE PAID BY BUYER TO THE COMPANY WITH RESPECT TO THE
PRODUCT(S) GIVING RISE TO SUCH LIABILITY OR (B) ONE HUNDRED THOUSAND
DOLLARS ($100,000), WHICHEVER IS LESS.
With respect to any software products incorporated in or forming a part of the Product
hereunder Buyer intends and agrees that such software products are being licensed and not
sold, and that the words "purchase", "sell" or similar or derivative words are understood and
agreed to mean "license", and that the word "Buyer" or similar or derivative words are
understood and agreed to mean "licensee". Notwithstanding anything to the contrary contained
herein, The COMPANY or its licensor, as the case may be, retains all rights and interest in
software products provided hereunder. See the Terms & Conditions of purchase for details
regarding such license.

User Manual
Version 1.0 7
II. Safety
IMPORTANT Safety Items to be Observed.
Safety Warnings
! DANGER (may cause serious damage to property and / or casualties)
1. Please carefully read this User Manual prior to operating the instrument and observe
the instructions on safe operation.
2. The power source must be grounded reliably and away from any sources of
electromagnetic interference.
3. Confirm that the voltage and frequency of the power supply matches the specified
voltage and frequency specified prior to use.
4. The instrument should be operated on an independent power outlet.
5. Do not allow the instrument to be plugged in or unplugged while the power switch is in
the on position.
6. Do not modify the power cord.
7. The working environment must be free of any flammable, explosive, volatile or
corrosive substances.
8. The instrument is deenergised only when the power cable is disconnected from the
power source.
9. This instrument is for indoor use only.
10. The instrument should be operated in a low humidity, well ventilated, dust, and water
free environment, without direct sunshine or an intense magnetic, light or heat source.
11. Ensure that the instrument and its accessories are free of any potential defects.
12. Ensure that the instrument is fastened tightly, and only standard accessories supplied
by the manufacturers are used with this instrument.
! WARNING (may cause property damage or personal injury)
13. Prevent water from splashing on the electrical elements of this instrument.
14. Before assembly, disassembly, cleaning or maintenance, the power source must be
disconnected.
! ATTENTION (may affect operational performance or service life)
15. When pulling the power plug out from a power source, do not pull out using the power
cord directly.
16. Only accredited and qualified professional repair technicians can open the instrument
or conduct required repairs. Persons performing repairs on the instrument other than
those selected or approved by the Company shall operate to void any warranty
contained hereinabove for the product

User Manual
Version 1.0 8
17. Only accredited and qualified professional repair technicians can open the instrument
or conduct required repairs. Persons performing repairs on the instrument other than
those selected or approved by the Company shall operate to void any warranty
contained hereinabove for the product
18. Do Not Touch the Chamber Door, the Chamber Body, or the Surrounding Surface
when the Set Temperature is Over 80℃(176℉) to avoid burns.
19. The 304 Stainless Steel liner is Not Acid Resistant, please adhere to advised Anti-
Corrosion measures and NEVER use Acidic media within the Oven to prevent damage

User Manual
Version 1.0 9
III. Stainless Steel Reactor Introduction
The cylindrical stainless steel reactor is vertically oriented and fixed in place by a supporting
stand. The reactor consists of an inner containment chamber and an outer insulating housing
chamber. The containment chamber is heated by steam that flows between the inner and outer
chamber walls. Steam has the advantage of minimizing the potential of localized “hot spots” and
avoiding scorching the containment liquid tank. It also allows the thermal exchange to be done
over a much larger surface area than a heating element and permits a more homogeneous
heating of the reactor’s content. The reactor is made of acid and heat resistant austenitic
stainless steel. It is easy to install and operate and has been shown to be safe and reliable.

User Manual
Version 1.0 10
3.1 After Sales Support
If problems are encountered or technical support is required when installing or using the
instrument, please contact [e-mail]
The Company may provide technical assistance and information regarding the
instrument or equipment or Service without charge at its sole discretion. Buyer
assumes sole responsibility for any reliance on or use of such assistance and
information, and the Company makes no warranty thereon.
Upon contact the following information is required:
•Product serial number (located on the instrument nameplate)
•Description of issue or problem
•Method and / or operating steps you have undertaken towards resolution.
•Your contact details including telephone number and email address.
3.2 Proper Use
The instrument is designed for non-residential use and to be used in conjunction only
with accessories recommended within this manual and by the manufacturer.

User Manual
Version 1.0 11
IV. Technical Specifications
Model
20520006
Product Name
Antidrastiras DS150
Tank Volume
150 L
Steam Pressure
0.8 Mpa
Heat Exchange Area
2.5 m²
Motor Power
1500 W
Distance Between Discharge Port and Ground
400 mm –410 mm
Hoisting Weight
200 kg
Receiving Tank Volume
100 L
4.1 Characteristics
•SUS304 stainless steel is used for the reactor. The reactor chamber is a vertically
oriented closed cylindrical tank with standard welded oval heads on both sides.
•The reactor top has a liquid inlet port, a tank washer port, an access and vent port.
The bottom of the tank has a liquid outlet port.
•The reactor is corrosion resistance and may operate over a large temperature
range. It is extremely durable and simple to operate.
•The reactor’s containment chamber may be easily cleaned by flushing water in both
directions.
•The reactor is equipped with access ports for maintenance and repair.

User Manual
Version 1.0 12
V. Standards and Conformity
Construction in Accordance with the
following Safety Standards:
EN IEC 60079-0:2018
EN -1:2014
IEC 60079-26-2014
EX II 2 G EXd ia IIB T2 Gc
Construction in Accordance with the
following EMC Standards:
EN ISO 12100:2010
EN 60204-1:2018
EN ISO 13849-1:2015
EN 61000-6-4:2019
EN 61000-6-2:2019

User Manual
Version 1.0 13
VI. Inspection
6.1 Packing List
Unpack the equipment carefully and check for any damage which may have arisen
during transport. In the event of identified damage, please contact
[e-mail].
The package includes the following items
Type
Quantity
Main Unit
1
Quick Setup Card
1

User Manual
Version 1.0 14
VII. Operating Instructions
•The stainless steel reactor is manufactured according to JB/T4735-1997 Steel
Welded Atmospheric Pressure Vessels standards. Pressured steam should not
exceed the rated maximum working pressure for any significant amount time. Steam
should be introduced by slowly opening the inlet valve until the desired pressure is
achieved.
If a trap is installed, the valve at the condensate outlet should always be left open. If
there is no trap, the valve should initially be turned on until the steam overflows and
then the valve should be adjusted for a minimal outflow. The valve can be adjusted
to increase or decrease pressure as needed. When operating the chamber, use the
reactor inlet valve to adjust chamber pressure in real time.
•A hoist is recommended for installation or relocation of the reactor. It is
recommended that thinned cushioning materials are used to cover any part of the
equipment that is in contact with the hoist cables to prevent damage. Avoid violent
jarring and excessive tilting during transportation and orient the chamber horizontally
at the set location for connecting plumbing fixtures and hoses.
•Before using the reactor should be inspected that all valves should be secure and
there is no leaking. it is recommended to test for leaks with water.
•The reactor should be cleaned with detergent before use. All valves should be
closed prior to cleaning. Make sure the liquid type is allowed to be put into the
stainless steel tank.
•Only use liquid that is recommended for cleaning the stainless steel chamber.
•Clearly mark all chemicals that are used for processing to prevent accidents. It is
recommended that a drainage ditch and a diluting device are present at the site
where the reactor is located.
•The maximum filling volume of the tank should not be exceeded. The maximum
filling of the tank can be calculated according to the formula given below:
Maximum filling volume = the filling volume factor x the actual volume of the tank x
the saturated liquid density of the medium at the designated temperature.

User Manual
Version 1.0 15
VIII. Pneumatic driven stirring system (optional)
Motor model
DAM4
Motor power
1/3HP
Torque
2.16NM
Rotational speed
0~900RPM Stepless Speed Control
Max air consumption
267L/min
Drum capacity
80L~150L
1. Regularly add lubricating oil to the control valve and air supply triplet.
2. Periodically drain any standing water in the triple.
3. The air outlet filter cotton of the pneumatic motor needs to be cleaned twice a
week.
4. The motor should be serviced at least once every six months.
IX. Maintenance and Cleaning
•All reactor flanges, joints and sealing rings should be inspected and cleaned as
necessary to prevent leakage.
•Thermometers, pressure gauges and safety valves should be regularly inspected
and or replaced as required.
•Abrasive tools (such as wire brushes, etc.) should not be used to clean the reactor
to avoid scratches and scarring.
•It is recommended that the reactor be cleaned following every use.
•A water pressure safety test is recommended after the first 5 years of usage. Future
testing should be done according to the company’s own standard.
•If pitting or other damage occurs to the reactor walls that reduce the thickness to
less than 3mm, the reactor is not suitable for safe use.