Holman WXPL001 User manual

User Guide
User Guide
Wi‑Fi Spotlight
Value Pack

2 of 20

3 of 20
PRODUCT CODE: WXPL001
Please read through all instructions before attempting assembly. Keep this user
guide handy for future use. iOS is a trademark of Apple Inc. Android is a trademark
of Google LLC. The Android robot is reproduced or modified from work created and
shared by Google and used according to terms described in the Creative Commons
3.0 Attribution License. The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Holman
Industries is under license. Other trademarks and trade names are those of their
respective owners. All other content is Copyright©HolmanIndustries2023.
Scan here for the latest manual
or visit
https://www.holmanindustries.com.au/product/
wi-fi-spotlight-value-pack

4 of 20
Contents
Overview 5
Package Content 5
Setup 6
Spotlight Spacing 6
Preparation 6
Installing Holman Home 8
Pairing 10
Right Hand Menu Key Functions 12
Individual Colour Selection 13
Bottom Menu Key Functions 14
Scene 14
Music 15
Countdown 15
Troubleshooting 16
Specifications 17
Warranty 18

5 of 20
Overview
Package Content
1. 1× PLUG IN POWER
SUPPLY for power
point (GPO)
2. 1× AC ADAPTOR INPUT
240VAC / OUTPUT 12VDC
3. 4× RGBW SPOTLIGHTS,
non extendible
4. 4× GROUND STAKES
with hardware included
5. 4× MOUNTING SCREWS
6. 1× ALLEN KEY
2
1
ÁNo modification or addition to the
light configuration is possible
3
4

6 of 20
Spotlight Spacing
2m LEAD CABLE from AC ADAPTOR to INLINE CONTROL.
1mLEADCABLE between INLINE CONTROL and first Wi-Fi Spotlight.
2m space between each Wi-Fi Spotlight. Before installation,
we suggest planning your lighting placement exactly where you
want to install your lights to ensure the spacing is correct.
Preparation
®Consider location of the
POWER POINT (GPO):
• 2m distance between
the ADAPTOR and
INLINE CONTROL
• 1m LEAD CABLE to
your first SPOTLIGHT
• Power supply and
INLINE CONTROL need
to be under cover (not
exposed)
1. Install the GROUNDSTAKE
to each Wi-Fi Spotlight, the
SPOTLIGHTS can swivel—
use this feature to give
yourself room to install the
MOUNTING SCREWS [a]
2. The screw can be
installed by hand, then
tightened up with the
ALLENKEY [b] (which is
the fastest way to install)
ÁDo not overtighten
a
b
Setup

7 of 20
Setup (continued)
Preparation (continued)
3. Plug the LEAD CABLE
into the AC ADAPTOR
®Note the orientation of the
plugs—they cannot be
forced together, if you’re
unable to connect please
review the orientation
4. Ensure the correct
O-ring is in place at each
point on the cable
a. RED: at the
ADAPTOR [c]
b. WHITE: at the INLINE
ADAPTOR and
SPOTLIGHTS [d]
5. Screw the covers down
over the plugs [e]
c
d
e

8 of 20
Setup (continued)
Installing Holman Home
1. Download Holman Home to
your mobile device via the
App Store or 
Google Play
2. Open Holman Home
on your mobile device
®You may be prompted to
allow notifications–the
app can still function if you
choose to opt out
3. Tap SIGN UP
4. Read our User Agreement
and Privacy Policy
and tap AGREE if you
wish to proceed
5. Follow the prompts to
register a Holman Home
account with your email
address
ÁEnsure your country
details are correct at this
stage
®You must allow the
DISCOVERING NEARBY
DEVICE permission (or
Bluetooth®permission,
depending on your phone
operating system)—this
allows Bluetooth®mesh
products to be added into
Holman Home
®You may be prompted
to allow access to your
location. This allows the
app to show weather
information—it will still
function if you choose to
opt out

9 of 20
Setup (continued)
Bluetooth®Connection
LEnsure you and your
smartphone are close to
your Wi-Fi Spotlight kit
during the connection
process—you may need to
prompt pairing mode
LYour Wi-Fi Spotlight kit will
perform preset schedules
from the app, even if
your smartphone is out of
Bluetooth®connection
range
®Schedules must be sent
within Bluetooth®range

Setup (continued)
Pairing
1. Pairing of the
spotlight chain is via
Bluetooth®Mesh, please
ensure you have allowed
the Bluetooth®(iOS)
or Nearby Devices
(Android ) permission
2. With the power on, your
SPOTLIGHTS should now
be in pairing mode, RED
and FLASHINGFAST
®Tap ADD DEVICE from
the Holman Home
Homescreen, you will see the
spotlight string appear under
DISCOVERINGDEVICES [a]
3. Press ADD [b] to add device
4. Tap [c] on the
ADDDEVICE screen to
commence pairing
®After 30 sec. to 1min. the
light will be successfully
added
5. Tap DONE [c] to
complete pairing
c
d
a
b

11 of 20
Setup (continued)
Pairing (continued)
6. You will now see the Spotlight
chain ‘Home’ page
ÁBefore you can access in
app functions, you need
to confirm the number
of lights in the chain.
The app minimum is 5
lights—please use 5
lights as your number

12 of 20
Functions
Right Hand Menu Key Functions
1. FILL: fill all lights
the same colour
2. INDIVIDUAL COLOUR
SELECTION: individual
light change
3. ERASER: remove light
®You can remove the last
light[a] to reduce to your 4
light chain as shown
4. NUMBER: number of
lights preset to chain
1
3
2
a
4

13 of 20
Functions
Individual Colour Selection
1. Tap Individual Colour
Selection [a] from the menu
2. Tap the COLOUR [b]
your want to use
3. Tap the LIGHT [c] you
wish to make that colour
®LIGHT 1 is furthest to the
left
4. Repeat until you’ve
coloured all lights
5. BRIGHTNESS SLIDER [d]
slide your finger along the
bar to reduce brightness
a
d
c
b

14 of 20
Functions (continued)
Bottom Menu Key Functions
1. POWER ON/OFF:
blue icon = ON
2. LIGHTBULB: home page
3. SCENE
4. MUSIC
5. COUNTDOWN
Scene
®Tap SCENE to select/set
your lighting scene from a
variety of options
1 5
3
2 4

Functions (continued)
Music
®Requires audio recording
permission, as this uses the
device microphone to work
®Lights will change colour
(dance) to the beat
Countdown
®Schedule is not available—
you can set a countdown
timer which will turn the
lights off after a set period
of time
®After the lights turn off,
you will need to set a new
countdown when you turn
them on again

16 of 20
Troubleshooting
Question Answer
My Wi-Fi Spotlights didn’t appear under
‘Discovering Devices’
nIf the spotlights do not appear
under DISCOVERING DEVICES,
press and hold the button on the
INLINECONTROLLER for 5 seconds,
the spotlights will change from
fast flash to slow flash, they should
then appear for Bluetooth®pairing.
Repeat process if this does not work
the first time
nContact customer service at
[e-mail]
if you require further assistance

17 of 20
Specications
Wi-Fi Spotlights
INPUT 240V AC
OUTPUT 12V DC
LIGHT OUTPUT 1W per light
PACK OUTPUT 4W total
SIZE ø43mm
HEIGHT 245mm
COLOUR RGBW Multi
HOUSING Plastic

18 of 20
Warranty
2 Year Replacement Guarantee
Holman Industries offers a 2 year
replacement guarantee with this product.
In Australia our goods come with
guarantees that cannot be excluded
under the Australian Consumer Law. You
are entitled to a replacement or refund
for a major failure and compensation for
any other reasonably foreseeable loss or
damage. You are also entitled to have the
goods repaired or replaced if the goods
fail to be of acceptable quality and the
failure does not amount to a major failure.
As well as your statutory rights referred
to above and any other rights and
remedies you have under any other laws
relating to your Holman product, we also
provide you with a Holman guarantee.
Holman Industries guarantees this
product against defects caused by faulty
workmanship and materials for 2 years
domestic use from the date of purchase.
During this guarantee period Holman
Industries will replace any defective
product. Packaging and instructions
may not be replaced unless faulty.
In the event of a product being replaced
during the guarantee period, the
guarantee on the replacement product
will expire 2 years from the purchase
date of the original product, not 2years
from the date of replacement.
To the extent permitted by law, this Holman
Replacement Guarantee excludes liability
for consequential loss or any other loss
or damage caused to property of persons
arising from any cause whatsoever. It
also excludes defects caused by the
product not being used in accordance with
instructions, accidental damage, misuse,
or being tampered with by unauthorised
persons, excludes normal wear and tear
and does not cover the cost of claiming
under the warranty or transporting the
goods to and from the place of purchase.
Should you suspect your product may
be defective and need some clarification
or advice please contact us directly:
1300 716 188
[e-mail]
11 WALTERS DRIVE,
OSBORNEPARK 6017 WA
If you are certain your product is
defective and is covered by the terms
of this warranty, you will need to
present your defective product and
your purchase receipt as proof of
purchase to the place you purchased
it from, where the retailer will replace
the product for you on our behalf.

19 of 20
The Holman website has a host of additional information on features. Head to
support.holmanindustries.com.au for more tips, tricks and support content.
If you still need help, feel free to email our friendly Customer Service team at
[email protected] or call at 08 9416 9999.

We really appreciate having you as a customer, and
would like to say thank you for choosing us.
We recommend registering your new product on our website. This will ensure we have
a copy of your purchase and activate an extended warranty. Keep up to date to with
relevant product information and special offers available through our newsletter.
www.holmanindustries.com.au/product-registration/
Copyright © 2023 Holman Industries
Thanks for being a
#SMARTGARDENER