Holmes HACP9 User manual

WARRANTY INFORMATION
SERVICE INSTRUCTIONS
1. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the
warranty.
2. If you have any questions regarding this unit’s operation or believe any repair is necessary, please write to our
Consumer Service Department.
3. If you need to exchange the unit, please return it in its original carton, with a sales receipt, to the store where you
purchased it. If you are returning the unit more than 30 days after the date of purchase, please see the enclosed
warranty.
4. If you have any other questions or comments, see our correspondence below or visit our website at
www.holmesproducts.com.
Sunbeam Products, Inc. d/b/a Jarden Consumer Solutions
303 NELSON AVENUE
NEOSHO, MO 64850
For your own records, staple or attach your sales receipt to this manual. Also, please take a moment to write the store
name/location and date purchase below.
STORE NAME:
LOCATION:
DATE PURCHASED:
(STAPLE RECEIPT HERE)
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS
WARRANTY INFORMATION
© 2006 Sunbeam Products, Inc. d/b/a Jarden Consumer Solutions. All Rights Reserved.
1 YEAR LIMITED WARRANTY
Sunbeam Products, Inc. d/b/a Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing
business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of one year from the date of
purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace
this product or any component of the product found to be defective during the warranty period. Replacement will be
made with a new or remanufactured product or component. If the product is no longer available, replacement may be
made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or
adjust any electrical or mechanical functions on this product. Doing so will void this warranty.
This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable.
Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers,
or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this
warranty.
This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or
misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair
or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts
of God, such as fire, flood, hurricanes and tornadoes.
What are the limits on JCS’s Liability?
JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or
statutory warranty or condition.
Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a
particular purpose is limited in duration to the duration of the above warranty.
JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.
JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the
product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract,
fundamental or otherwise, or for any claim brought against purchaser by any other party.
Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or
limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from province to province,
state to state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
In the U.S.A.
If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-546-5637
and a convenient service center address will be provided to you.
In Canada
If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-546-5637
and a convenient service center address will be provided to you.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc d/b/a Jarden Consumer Solutions located in Boca Raton,
Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden
Consumer Solutions, located at 5975 Falbourne Street, Mississauga, Ontario L5R 3V8. If you have any other problem or
claim in connection with this product, please write our Consumer Service Department. PLEASE DO NOT RETURN
THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.
9100010008399 HACP906EM1 Printed in China
Owner’s Guide
HACP9
Oscillating Clip Fan
HACP906EM1.qxd 10/16/06 14:25 Page 1

PLEASE READ AND SAVE THESE
IMPORTANT SAFETY INSTRUCTIONS FEATURES - OPERATIONS
Thank you for purchasing this Holmes®product. We
understand the value of quality and are committed to
making superior products that stand the test of time. We
trust this product will exceed your expectations of quality
and reliability. We hope that you enjoy this product and
will consider purchasing another Holmes®product in the
future. To see our full product line or if you have any
questions or comments about this product, please visit our
website at: www.holmesproducts.com.
When using electrical appliances, basic safety precautions
should always be taken including the following:
1. Read all instructions before using this appliance.
2. Use fan only for purposes described in the instruction
manual.
3. To protect against electrical shock do not immerse unit,
plug or cord in water or spray with liquids. Plug the
appliance directly into a 120V AC electrical outlet.
4. WARNING: To reduce the risk of fire or electrical
shock, DO NOT use this fan with any solid-state speed
control device.
5. Close supervision is necessary when any appliance is
used by or near children.
6. Unplug from outlet when not in use, when moving fan
from one location to another, before putting on or
taking off parts and before cleaning.
7. Avoid contact with moving parts.
8. DO NOT operate in the presence of explosives and/or
flammable fumes.
9. To avoid fire hazard, NEVER place the cord under rugs
or any parts near an open flame, cooking or other
heating appliance.
10. DO NOT operate any appliance with a damaged cord
or plug after the appliance malfunctions, or has been
dropped/damaged in any manner.
11. The use of attachments not recommended or sold by
the appliance manufacturer may cause hazards.
12. DO NOT use outdoors.
13. DO NOT let the cord hang over the edge of a table,
counter or come in contact with hot surfaces or leave
exposed to high traffic areas.
14. To disconnect, grip plug and pull from wall outlet.
Never yank on cord.
15. Always use on a dry, level surface.
16. DO NOT operate fan until fully assembled with all
parts properly in place.
17. This product is intended for household use only and
not for commercial or industrial applications.
PLEASE READ AND SAVE
THESE IMPORTANT
SAFETY INSTRUCTIONS
PRE-OPERATING INSTRUCTIONS
THIS HACP9 OSCILLATING CLIP FAN COMES FULLY
ASSEMBLED AND IS READY FOR IMMEDIATE USE.
OPERATING INSTRUCTIONS
1. Clip fan onto a dry, level surface.
2. Please make sure the On/Speed switch is in the "Off"
position. Plug the cord into any standard 120-volt A/C
outlet.
3. The SPEED is adjusted by moving the switch left or
right to the desired setting.
4. The OSCILLATION control knob is located on the top of
the fan motor housing. To start oscillation, push control
knob down. To stop oscillation, pull control knob up.
WALL MOUNTING INSTRUCTIONS
NOTE: On the underside of the fan’s clip there are “KEY
SLOTS” (2).
Select a suitable spot on a wall (away from curtains,
draperies, or heat sources) where you want to mount the
fan. Use a No. 10 pan head wood screw (1 1/4” length)
and thread into a 2x4 wood stud behind the dry wall.
Please refer to the warning below if you are unable to
locate a wood stud in the wall.
When threading the screw into the wall, leave
approximately 1/4” clearance between the screw and wall.
This will allow the clip’s “KEY SLOTS” to fit easily and
securely over the screws. If necessary, the screw may be
tightened further to ensure the fan is firmly attached to the
wall.
WARNING: WHEN MOUNTING THE FAN TO PLASTER,
DRYWALL OR SHEETROCK, YOU MUST USE A MOLLY BOLT,
OR SIMILAR FASTENER. DOING SO WILL PREVENT THE FAN
FROM BECOMING DISLODGED WHILE IN OPERATION.
ADJUSTMENT INSTRUCTIONS
Vertical Angle Adjustment
1. To change the tilting angle of the fan head, simply
loosen the tilt adjustment knob.
2. Move the fan head to the desired angle, then firmly
tighten the knob to lock the fan head in place.
Horizontal Angle Adjustment
Turn the motor housing to the desired direction.
WARNING: MAKE SURE TO SUPPORT THE FAN HEAD
ASSEMBLY WHEN LOOSENING THE ADJUSTABLE HEIGHT
NUT, AS THE WEIGHT OF THE FAN HEAD MAY CAUSE THE
EXTENSION POLE TO COLLAPSE.
CLEANING/MAINTENANCE
Follow these instructions to correctly and safely care for
your oscillating clip fan. Please remember:
•Always unplug the fan before cleaning or
disassembling.
•Do not allow water to drip on or into the fan motor
housing.
•Do not use any of the following as a cleaner: gasoline,
thinner, benzene.
1. To access the fan blade, remove the front grill by
pressing the tabs on the grill ring away from the fan.
2. Clean the fan blade, both front and rear grills with a
soft cloth moistened with a mild soap solution.
NOTE: FAN BLADE SHOULD NOT BE REMOVED.
3. Replace the front grill by snapping back into rear grill.
Fan Head and Clip Cleaning
Using a soft, moist cloth, with or without a mild soap
solution, carefully clean the fan head. Please use caution
around the motor housing area. Do not allow the motor or
other electrical components to be exposed to water.
FAN STORAGE
In the off-season:
•IMPORTANT: Keep your fan in a safe dry location,
where the fan is not likely to fall or be crushed.
•Your fan should be stored fully assembled.
•Remember to protect the fan head from dust or
moisture.
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit in
a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
CLEANING / STORAGE
A
B
C
D
E
F
FIGURE 1
A. Front Grill
B. Fan Blade
C. Power Cord
D. Key Slots (underside
of clip)
E. Pivot Caps (2)
F. Clip
G. Clamp Pivot
H. Pivot Bracket
I. Motor Housing
J. Oscillation Knob
K. Rear Grill
L. Tilt Adjustment Knob
G
H
I
J
K
L
HACP906EM1.qxd 10/16/06 14:25 Page 2