Holz-Blech Brantevik II 40 User manual

× 75
× 10
× 12
× 540
× 30
× 30
4×405×70
4×506×1401,4×40
M8×70
Ø 3 mm
Ø 4 mm
Ø 5 mm
Ø 8 mm
1/20
BRANTEVIK II 40
PREPARE THE GROUND, UNWRAP THE PACKAGE,
LAY OUT THE COMPONENTS, FIND THE TOOLS.

2/20
BRANTEVIK II 40
MAKE SURE THAT THE FOUNDATION
IS INSTALLED ON A LEVEL SURFACE.
CHECKING ALL DIRECTIONS,
INCLUDING CORNER TO CORNER. 3%
LAY OUT THE FOUNDATION BEAMS
AND SQUARE IT BY MEASURING
FROM CORNER TO CORNER.
IFB
AC
D B
AB=CD
0°

× 4× 14
5×70
6×140
Ø 4 mm
Ø 5 mm
3/20
BRANTEVIK II 40
LAY OUT THE BOTTOM LOGS,
ATTACH TO THE FOUNDATION.
THE WALL LOGS WILL HANG OVER
THE FOUNDATION BEAMS BY
APPROXIMATELY 5MM. THIS OVERHANG
IS DESIGNED AS A RAIN DRIP. 5%
2 BL-1
6×140
1 BL-1
1 BL-2
A LG-1
B LG-1
5×70
5mm

× 4
5×70Ø 4 mm
× 4
6×140Ø 5 mm
4/20
BRANTEVIK II 40
7%
ATTACH THE FIRST ROW OF
WALL LOGS INTO THE BOTTOM
LOGS WITH SCREWS.
2 LG-6
1 LG-2
1 LG-6
6×140
5×70

5/20
BRANTEVIK II 40
12%
AFTER PLACING 3-4 ROWS OF WALL LOGS, TAP EACH
WALL LOG IN PLACE USING A HAMMER AND THE
HITBLOCK PROVIDED, TO TIGHTEN THE LOGS.
HITBLOCK

6/20
BRANTEVIK II 40
13%
SLIDE THE DOOR IN,
ATTACH THE HANDLE.
CDD1R
3 LOGS IN PLACE

1 LG-2
1 LG-2
1 LG-1
7/20
BRANTEVIK II 40
26%
DON`T FORGET TO
TIGHTEN THE LOGS AFTER
EVERY 3-4 ROWS.

8/20
BRANTEVIK II 40
SLIDE THE WINDOW IN,
ATTACH THE HANDLE.
28%
CW1R

× 4
6×140Ø 5 mm
9/20
BRANTEVIK II 40
42%
INSTALL THE GABLES WITH LONG SCREWS
TO THE WALL LOGS ON THE FRONT AND
REAR WALLS.
14 LOGS IN PLACE
GABLE
B TL-1
A TL-1 B LG-4
B LG-3
B LG-2
A LG-2
A LG-3
A LG-4

× 6
6×140Ø 5 mm
10/20
BRANTEVIK II 40
43%
INSTALL THE ROOF PURLINS AND
ATTACH THEM WITH SCREWS.
RFR
RFB
RFB

× 288
4×50
11/20
BRANTEVIK II 40
PLACE THE FIRST ROOFBOARD FLUSH WITH THE
END OF THE PURLINS AND ATTACH
WITH 6 SCREWS, 3 INTO EACH NEXT,
SAW THE LAST BOARD TO MAKE IT FIT.
46%
RB

× 44
4×40
12/20
BRANTEVIK II 40
79%
FOR THE FASCIA TRIMS INSERT
SCREWS AFTER EVERY 0,5 METERS.
RR1
RR2

× 32
4×40Ø 3 mm
13/20
BRANTEVIK II 40
83%
EAVES EDGES GO ON TOP
OF THE ROOFING*.
*(NOT INCLUDED) RF EE

×4
4×40Ø 3 mm
14/20
BRANTEVIK II 40
84%
ATTACH ROMBS WITH SCREWS.
ROMB

× 238
4×50
15/20
BRANTEVIK II 40
89%
14 SCREWS INTO THE FIRST FLOORBOARD,
7 INTO EACH NEXT, SAW THE
LAST BOARD TO MAKE IT FIT.
FB

× 30
1,4×40
16/20
BRANTEVIK II 40
96%
SAW THE BASEBOARDS
AND ATTACH WITH NAILS
AT EVERY 0,5 METERS.
BB

× 12
M8×70
Ø 8 mm
DRILL THROUGH THE WALL, HOLE
MUST BE AT THE BOTTOM OF THE OVAL,
ATTACH WITH BOLTS. 97%
WINDBOARD CONNECTS BOTTOM LOG
WITH THE TOP LOG. SAW THE WINDBOARD
INTO THE RIGHT LENGTH. FOR THE TOP
BOLT, DRILL 8MM HOLE THROUGH THE
WINDBOARD.
17/20
BRANTEVIK II 40
97%
4CM
20CM
WINDBOARD

90º
90º
18/20
BRANTEVIK II 40
98%
IF DOOR IS TILTED,
PUSH THE DOOR FRAME SO
THAT ALL CORNERS ARE 90º.

19/20
BRANTEVIK II 40
99%
IF DOORS ARE IN DIFFERENT HEIGHTS
OR THERE IS A GAP BETWEEN THEM,
ADJUST 3 SCREWS ON DOOR HINGES.

20/20
BRANTEVIK II 40
WHEN THE HOUSE IS ASSEMBLED, YOU SHOULD
COVER THE TIMBER WITH WOOD PROTECTIVE SEAL,
PAINT OR STAIN AS SOON AS POSSIBLE TO AVOID
DETERIORATION TO THE WOOD.
100%