Holz-Blech CHRISTINA 28 User manual

× 25
× 12
× 400
× 80
× 30
5×70
4×506×1401,4X40
M8×60
Ø 3 mm
Ø 4 mm
Ø 5 mm
Ø 8 mm
1/20
CHRISTINA 28
PREPARE THE GROUND, UNWRAP THE PACKAGE,
LAY OUT THE COMPONENTS, FIND THE TOOLS.

2/20
CHRISTINA 28
MAKE SURE THAT THE FOUNDATION
IS INSTALLED ON A LEVEL SURFACE.
CHECKING ALL DIRECTIONS,
INCLUDING CORNER TO CORNER. 3%
LAY OUT THE FOUNDATION BEAMS
AND SQUARE IT BY MEASURING
FROM CORNER TO CORNER.
IFB
AC
DB
AB=CD
0°

× 6× 10
5×70
6×140
Ø 4 mm
Ø 5 mm
3/20
CHRISTINA 28
LAY OUT THE BOTTOM LOGS,
ATTACH TO THE FOUNDATION.
THE WALL LOGS WILL HANG OVER
THE FOUNDATION BEAMS BY
APPROXIMATELY 5MM. THIS OVERHANG
IS DESIGNED AS A RAIN DRIP. 5%
2 BL-1
6×140
1 BL- 2
1 BL-1
A LG-3
B LG-3
5×70
5mm

× 4
5×70Ø 4 mm
× 6
6×140Ø 5 mm
4/20
CHRISTINA 28
7%
ATTACH THE FIRST ROW OF
WALL LOGS INTO THE BOTTOM
LOGS WITH SCREWS.
2 LG-1
1 LG-3
1 LG-2
6×140
5×70

5/20
CHRISTINA 28
12%
AFTER PLACING 3-4 ROWS OF WALL LOGS, TAP EACH
WALL LOG IN PLACE USING A HAMMER AND THE
HITBLOCK PROVIDED, TO TIGHTEN THE LOGS.
HITBLOCK

6/20
CHRISTINA 28
13%
SLIDE THE DOOR IN,
ATTACH THE HANDLE.
BDD4
3 LOGS IN PLACE

7/20
CHRISTINA 28
26%
DON`T FORGET TO
TIGHTEN THE LOGS AFTER
EVERY 3-4 ROWS.

8/20
CHRISTINA 28
SLIDE THE WINDOW IN,
ATTACH THE HANDLE.
28%
BW2
1 LG 2
1 LG 1

× 6
6×140Ø 5 mm
9/20
CHRISTINA 28
42%
INSTALL THE GABLES WITH LONG SCREWS
TO THE WALL LOGS ON THE FRONT AND
REAR WALLS.
18 LOGS IN PLACE
2 TL-1
A LG-1
B LG-2
B LG-1
A LG-2
1 TL-1

× 20
6×140Ø 4 mm
10/20
CHRISTINA 28
43%
INSTALL THE ROOF PURLINS AND
ROOF ELEMENTS 1, ATTACH THEM
WITH SCREWS.
RFB
RE1

× 32
6×140Ø 5 mm
11/20
CHRISTINA 28
SCREW RS1 AND RS2 TO
PURLINS AND ROOF ELEMENTS.
46%
RS1
RS2

× 12
4×50Ø 4 mm
12/20
CHRISTINA 28
USE SCREWS TO CONNECT
ROOF SIDES.
47%

13/20
CHRISTINA 28
SAW ROOFBOARDS SO THAT IT IS
POSSIBLE TO ATTACH THEM AGAINST
ROOF SIDES.
AT THE BACK OF THE HOUSE WILL
BE A GAP BETWEEN THE ROOFSIDE
AND THE ROOFBOARD 79%
RB

× 172
4×50
14/20
CHRISTINA 28
84%
PLACE THE FIRST ROOFBOARD FLUSH WITH
THE END OF THE PURLINS AND ATTACH
WITH 8 SCREWS, 4 INTO EACH NEXT.
RB

× 180
4×50
15/20
CHRISTINA 28
89%
10 SCREWS INTO THE FIRST FLOORBOARD,
5 INTO EACH NEXT, SAW THE
LAST BOARD TO MAKE IT FIT.
FB

× 30
1,4x40
16/20
CHRISTINA 28
96%
SAW THE BASEBOARDS
AND ATTACH WITH NAILS
AT EVERY 0,5 METERS
BB

× 12
M8×60
Ø 8 mm
17/20
CHRISTINA 28
97%
DRILL THROUGH THE WALL, HOLE MUST
BE AT THE BOTTOM OF THE OVAL,
ATTACH WITH BOLT.
4CM
20CM
WINDBOARD

90º
90º
18/20
CHRISTINA 28
98%
IF DOOR IS TILTED,
PUSH THE DOOR FRAME SO
THAT ALL CORNERS ARE 90º.

19/20
CHRISTINA 28
99%
IF DOORS ARE IN DIFFERENT HEIGHTS
OR THERE IS A GAP BETWEEN THEM,
ADJUST 3 SCREWS ON DOOR HINGES.

20/20
CHRISTINA 28
WHEN THE HOUSE IS ASSEMBLED, YOU SHOULD
COVER THE TIMBER WITH WOOD PROTECTIVE SEAL,
PAINT OR STAIN AS SOON AS POSSIBLE TO AVOID
DETERIORATION TO THE WOOD.
100%