Home Accents Holiday 22RT01162225YX User manual

THD SKU# 1007 333 584
Model # 22RT01162225YX
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 4.5ft Moonlit Magic LED Bat Silhouette. We
strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing HomeAccents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
4.5ft Moonlit Magic LED Bat Silhouette
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground
versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center or return
to place of purchase with purchase receipt.
Assembly of this product may require more than one person.
1-855-HDHoliday (1-855-434-6543)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on the cord.
CAUTION:The lighting string on this product is rated at 9.6 Watts (0.08
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
batteries, products that have been subjected to unauthorized repair and/or modification
and damage caused by shipping and improper handling, alterations, misuse, in store
display models or accidents. Questions, problems, missing parts? Before returning to the
store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
Parts List
Locater Name Qty.
A Body of Bat 1
B Wing of Bat 2
C Base Stand 1
D Support Bar 1
Hardware List
Locater Name Qty.
E Cotter Pin 6
F Plastic Tie 8
G Ground Stake 4
A
B
C
D
E
F
G

A
SSEMBLY
1 Assembling the Body of Bat to the Base Stand
Place all the parts flat on the ground. Insert the connecting rods on the
bottom of Bat's Body (A) into the matching connecting holes on the
Base Stand (C) and fasten at the connecting loop with Plastic Ties (F).
Insert each hooked end of the Support Bar (D) into the matching
connecting holes on the Head of Bat and the Base Stand (C)
respectively then secure with the Cotter Pins (E).
2 Assembling the Wings of Bat
Insert the connecting rods on the Wings of Bat (B) into the matching
connecting holes on the Bat's Body (A) then secure with the Cotter
Pins (E).
3 Fasten the Bat's Body and Wings
Fasten the Bat's Body (A) and Wings (B) together with the Plastic Ties
over the adjoining metal frames (F).
4 Assembling the Ground Stakes
Place the 4 Ground Stakes (G) over the 4 Corners of the Base Stand then
firmly into the ground.
A
C
E
F D
B
A
E
A
B
F
G