Home Accents Holiday 805 560 User manual

Christmas Tree
Sku # 805 560
Package Contents
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b. This product is for indoor use only.The electrical rating is 1.70A 120V
60Hz.
c. This seasonal product is not intended for permanent installation or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces,candles,or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails,or place
on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house,when retiring for the
night,or if left unattended.
h. This is an electric product and not a toy!To avoid risk of fire,burns,
personal injury and electric shock it should not be played with or
placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord,wire, or light string.
k. Do not close doors or windows on the product or extensions cords as
this may damage the wire insulation.
l. Do not cover the product with cloth,paper,or any material that is not a
part of the product when in use.
m.Read and follow all instructions that are on the product or provided
with the product.
n. SAVETHESE INSTRUCTIONS
Pre-Assembly
Operation
Assembling the tree stand
Assembly
When using electrical products,basic precautions should always
be followed,including the following:
(IMPORTANT:If yourtreecamewith the SUREBRIGHT™ lights.Do not
removebulbs withthewhitering base.Thesebulbs aresafetyfusedbulbs
andremovingthemwill permanently damagethelightstringand void
thelimitedwarrantyofthis product.)
Part Description Quantity
D Tree stand 1
A Tree top,tag 1 1
B Tree center,tag 2 1
C Tree bottom,tag 3 1
Step 1.Choose a location near a wall outlet.
Step 2.Unfold the legs of the tree stand (D) and lay the stand on the floor.
Step 3.Slide the locking disk of the tree stand (D) down until it snaps into
place.
Turning on the tree
Maintenance
Care and Cleaning
Troubleshooting
Spare parts
Repairing Loose Hinges
Problem Solution
The tree does not
light Ensure that all tree sections are plugged into
each other and that the tree is plugged into
the wall.If your tree came with a foot pedal,
step on the On/Off button.
Check for blown fuses at the light string and
power cord plugs.Replace as needed with the
replacement fuses provided.
Check for loose,broken,or missing bulbs and
replace as needed with the replacement bulbs
provided
Step 6.When finished shaping the branches, slightly upsweep all branch
tips for a uniform look.
Step 1.Remove the protective caps from the tree bottom (C) and insert
the pole into the tree stand (D).
Step 2.Remove the protective caps from the tree center (B) and insert the
pole into the tree bottom (C) .
Step 3.Remove the protective cap from the tree top (A) and insert the
pole into the tree center (B).
Step 4.Shape the branches to your preference by working from the
bottom to the top. When adjusting branches, ensure that all wires
are free of branch hinges.
Step 5.Connect the light strings as per the color labels indicated in
attached photo and insert green label plug into the wall outlet.
NOTE:If some bulbs do not light or flicker,search for any loose plugs
and/or broken,loose,or missing bulbs.Replace bulbs promptly with the
replacement bulbs provided in order to maintain the performance and
life expectancy of your tree.
Step 1.Connect the light strings of the tree together and plug the power
cord into a wall outlet.
Step 2.If the tree comes with a foot pedal,step on the On/Off button.
This tree package includes hinge pins,washers,bulbs,and fuses for any
replacement or repair that you need to perform on your tree.If extra parts
are needed,contact the Customer Service Team at 1-877-527-0313
between the hours of 8 am and 5 pm EST,Monday through Friday.
Step 1.Remove all ornaments and decorations.
Step 2.Unplug the cord from the wall and then unplug each section of the
tree.
Step 3.Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
Step 4.Repeat this step for the center and bottom tree sections.
Step 5.Carefully place all tree sections into a shipping box and tape it
shut.
Step 6.Store your tree in a cool,dry place away from sunlight.
Step 1.Place the branch into the slot of the bracket
Step 2.Insert a new hinge pin through the holes of the bracket and secure
with a washer.
Assembling the tree
Section 1
Section 2
Section 3
Insert
Green Label
Plug Into Wall
Outlet
Assemble
Red Labels
Together
Assemble
Yellow Labels
Together
S100
S50
S100
S100
S50
S100