Home Accents Holiday TY454-1511-0 User manual

USEAND CARE GUIDE
5 ft 200Lighted LED Grapevine Animated Deer
THANK YOU
We appreciate the trust and confidence you have placed in Home Accents through the purchase
of this 5 ft 200Lighted LED Grapevine Animated Deer. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Home Accents!
Guarantee
What is Covered
The product is intended for residential seasonal use for approximately 90 days per year. This
product is covered by a 90 day limited guarantee due to defects in material and workmanship.
Return the product with purchase receipt to the location of purchase for refund within 90 days
of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDs, batteries,
products that have been subjected to unauthorized repair and/or modification and damage caused
by shipping and improper handling, alterations, misuse or accidents. Questions, problems, missing
parts? Before returning to the store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
YOW SKU # 691 594
Model # TY454-1511-0
Pre-Assembly
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return to place of purchase with proof of
purchase receipt. Assembly of this product may require more than one person.
PACKAGE CONTENTS
Package Contents/Parts List
Part Description Quantity
A Ear 1
B Tail 1
C Accessory Bow 1
D Head/Neck 1
E Antlers 2
F Body 1
G Front Legs 2
H Hind Legs 2
Package Contents/Parts List
Part Description Quantity
I Connect Bar 1
J Motor 1
K Cotter Pin 1
L Ground Stakes 4
M Spare Fuse 1
N Spare Bulb 5
O Plastic Tie 10
I
L OM
N
A B
C
DE
F
G H
K
J
I

Assembly
Assembling the Animated Deer
Step 1. Insert metal rods attached to the top of Front and Hind Legs (G&H) into the matching
holes on the underside of Body (F). (FIG.1)
Step 2. Fasten each Leg and the body together with Plastic Tie (O) and stand the deer in an
upright position. (FIG.1)
Step 3. The Legs come with metal bars attached to stabilize the Deer. Insert the hooked end
of the metal bars into the metal nut on the opposite Leg. (FIG.1)
Step 4. There is a pair of hooks on the back edge of the Head/Neck (D). Insert into the front of
Body (F). Insert the end of the long Connecting Bar (I) attached to the Motor (J) into the tube
on the head and lock with the Cotter Pin (K). (FIG.1)
Step 5. Insert the wires of the Accessory Bow (C) through the holes of the Body then twist the
wires together to secure. (FIG.1)
Step 6. Insert the rods of Antlers (E) and Ears (A) into the matching holes in the Head (D). (FIG.2)
Step 7. Insert the rod of Tail (B) into the matching hole in the rear of the Body (F). (FIG.2)
Step 8. Secure the Deer to the ground with the Ground Stakes (L). (FIG.2)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 16.8Watts
(0.14Amps). Do not overload. Do not connect to other lighting strings, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to Store or discard if the product has cuts, damage or frayed wire
insulation on cords, cracks in the socket enclosures, loose connections or exposed
copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product, wire and lighting connections. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
D
F
G H
F
FIG.1
E A
B
FIG.2