Home Accents Holiday TY151-2011-4 User manual

OMS THD SKU # 1005 269 895
Model # TY151-2011-4
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 48in 105 Lights LED Penguin and Snowman
on Sled. We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
48in 105 Lights LED Penguin and Snowman on Sled
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many parts
are connected by the lighting string that runs throughout the item. Take special care not
to pull, cut or damage the lighting string. Read the entire manual prior to assembly and
identify all the parts included in the package against the parts list. It is recommended to
assemble parts of the product while laying flat on the ground versus standing the item
up to assemble the parts. If any parts are missing or damaged do not attempt assembly
but contact our customer service center or return to place of purchase with purhcase
receipt.
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on the cord.
CAUTION:The lighting string on this product is rated at 7.2 Watts (0.06
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Trouble Shooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
batteries, products that have been subjected to unauthorized repair and/or modification
and damage caused by shipping and improper handling, alterations, misuse, in store
display models or accidents. Questions, problems, missing parts? Before returning to the
store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
Diagram of Parts
Parts List
Locater Name Qty.
A Hat of Penguin 1
B Head of Penguin 1
C Halves of Penguin's Body 2
D Wing of Penguin 2
E Foot of Penguin 2
F Hat of Snowman 1
G Head of Snowman 1
H Halves of Snowman's Body 2
I Arm of Snowman 2
J Foot of Snowman 2
K Scarf 2
L1 Back Half of Sled 1
L2 Front Half of Sled 1
M Halves of Ice Slope 2
N Supporting Pole 1
O Base Stand 1
Hardware List
Locater Name Qty.
P Spare Fuse 2
Q Spare Bulb 3
R Plastic Tie 25
S Ground Stake 4
A
H
E
B
J
C I
G
D
L1
F
K
M
N
O
R
Q
P
S
L2
D
I

A
SSEMBLY
1 Assembling the Ice Slope
Insert the connecting rods on the upper Half of Ice Slope (M) into the
connecting holes on the lower Half of Ice Slope and fasten at the
connecting loops with the Plastic Ties (R).
2 Securing the Base Stand to the Ice Slope
Insert the top tapered end of the Supporting Pole (N) into the connecting
hole on the back side of the upper Half of Ice Slope (M) and insert the
bottom end of the Supporting Pole into the connecting rod on the Base
Stand (O). Secure with locking pins and fasten at the connecting loops
with the Plastic Ties (R).
3 Assembling the Sled to the Ice Slope
Insert the connecting rods on the Back and Front Halves of Sled (L1 &
L2) into the connecting holes on top of the Ice Slope (M) and fasten at
the connecting loops with the Plastic Ties (R).
4 Assembling the Penguins Body and Hat, Wings & Feet to
the Penguin's Body
Align two Halves of Penguin's Body (B) and insert the connecting rods of
one half into the connecting holes on the other half then fasten at the
connecting loops with Plastic Ties (R). Insert the connecting rods on the
bottom of the Hat (A) into the connecting holes at the top of the Head (B).
Insert the connecting rods on each Wing and Leg (D,E) into the matching
connecting holes on the Body (B). Fasten parts at the connecting loops with
Plastic Ties (R).
5 Assembling the Snowman's Body and Hat, Wings & Feet to
the Snowman's Body
Align the two Halves of Snowman's Body (H) and insert the connecting
rods on one half into the connecting holes on the other half. Insert the
connecting rods on the bottom of the Hat (F) into the connecting holes
at the top of the Head (G). Insert the connecting rods on each Arm and
Leg (I,J) into the connecting holes on the Body of Snowman (H) and
fasten at the connecting loops with the Plastic Ties (R).
6 Assembling the Penguin and Snowman to the Sled
Insert the connecting rods on the backside of the Penguin and Snowman
(C,H) into the matching connecting holes on the top of the Sled (L) and
fasten at the connecting loops with the Plastic Ties (R).
7 Assembling the Scarves to the Penguin and Snowman
Wrap the Scarves (K) around the necks of the Penguin and Snowman.
8 Assembling the Ground Stakes
Insert Ground Stakes (S) over the metal frame on the Base Stand and the
front of the Ice Slope then into the ground firmly.
M
R
N
O
M
R
R
L1
M
R
L2 A
B
E
D
R
B
I
H
R G
F
H
J
C
R
H
L
K
S