Home Accents Holiday TG70P3937S01 User manual

Christmas Tree
Model# TG70P3937S01
Sku # 1000 834 599
Package Contents
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b. This product is for indoor use only. The electrical rating is
1.53A 120V 60Hz.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or
nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of
fire, burns, personal injury and electric shock it should not
be played with or placed where small children can reach
it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire,
or light string.
k. Do not close doors or windows on the product or exten-
sions cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any mate-
rial that is not a part of the product when in use.
m.Read and follow all instructions that are on the product or
provided with the product.
n. SAVE THESE INSTRUCTIONS
Pre-Assembly
Assembling the tree stand
Assembly
When using electrical products, basic precautions should
always be followed, including the following:
Step 1.Choose a location near a wall outlet.
Step 2.Unfold the legs of the tree stand (D) and lay the stand
on the floor.
Step 3.Slide the locking disk of the tree stand (D) down until
it snaps into place.
Step 1.Remove the protective caps from the tree bottom (C)
and insert the pole into the tree stand (D).
Step 2.Remove the protective caps from the tree center (B)
and insert the pole into the tree bottom (C) .
Step 3.Insert the tree top (A) into the tree center (B).
Step 4.Shape the branches to your preference by working
from the bottom to the top. When adjusting
branches, ensure that all wires are free of branch
hinges.
Step 5.Connect the plug(s) securely to the extension cord(s)
as per the color labels indicated in attached photo
and insert the green label extension cord plug into
the wall outlet.
Step 6.When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
Assembling the tree
Part Description Quantity
D Tree stand 1
A Tree top, tag 3 1
B Tree center, tag 2 1
C Tree bottom, tag 1 1
Section 3
Section 2
Section 1
S100
S100
S100
S50
S100
Insert Red Label
Plugs Into Red
Labeled Extension Cord
Insert
Green Label
Plug Into Wall
Outlet
Foot Pedal
on/off Switch
Click

Christmas Tree
Model# TG70P3937S01
Sku # 1000 834 599
Operation
Turning on the tree
Maintenance
Care and Cleaning
Troubleshooting
Spare parts
Repairing Loose Hinges
Problem Solution
The tree does not
light Ensure that all tree sections are
plugged into each other and that the
tree is plugged into the wall. If your
tree came with a foot pedal, step on
the On/Off button.
Check for blown fuses at the power
cord plug. Replace as needed with the
replacement fuses provided.
Check for loose, broken, or missing
bulbs and replace as needed with the
replacement bulbs provided.
NOTE: If some bulbs do not light or flicker, search for any
loose plugs and/or broken, loose, or missing bulbs. Replace
bulbs promptly with the replacement bulbs provided in
order to maintain the performance and life expectancy of
your tree.
Step 1.Connect the light strings of the tree together and
plug the power cord into a wall outlet.
Step 2.If the tree comes with a foot pedal, step on the
On/Off button.
This tree package includes hinge pins, washers, fuse and
bulbs for any replacement or repair that you need to
perform on your tree. If extra parts are needed, contact the
Customer Service Team at 1-877-527-0313 between the
hours of 8 am and 5 pm EST, Monday through Friday.
Step 1.Remove all ornaments and decorations.
Step 2.Unplug the cord from the wall and then unplug each
section of the tree.
Step 3.Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
Step 4.Repeat this step for the bottom tree section.
Step 5.Carefully place all tree sections into a shipping box
and tape it shut.
Step 6.Store your tree in a cool, dry place away from
sunlight.
Step 1.Place the branch into the slot of the bracket
Step 2.Insert a new hinge pin through the holes of the
bracket and secure with a washer.
User servicing instructions
FUSED LAMP REPLACEMENT
WARNING - Risk of fire:Do not replace the fuse lamp
contained in this set with any other type of lamp, use only
spare fuse lamps provided with this product. In case of a
burnt out FUSED lamp, the entire series of 50 lamps will be
out.To replace the fused lamp:
1. Grasp the plug and remove
from the receptacle or other
outlet device. Do not unplug
by pulling the cord.
2. Locate the fused lamp with
gray color lamp holder. Pull
the burnt fused lamp
and plastic lamp base straight out of the lamp holder.
3. Replace with a spare fused lamp. The fused lamp can be
distinguished by a gray lamp base and an additional clear
plastic cover.
4. Plug in the lights again.
Clear Plastic
Cover
Gray Lamp
Base
Gray Lamp
Holder