Home Decorators Collection 2048100120R User manual

HAWTHORNE 7 DRAWER CHEST 48.5"Hx20"W
SKU # 2048100120R (Dark Cherry)
SKU # 2048100550R (Oak)
SKU # 2048100410R (White)
BEFORE BEGINNING ASSEMBLY, CHECK TO MAKE SURE ALL
PARTS AND HARDWARE ARE ACCOUNTED FOR.
IT IS SUGGESTED THAT YOU SAVE THE CARTON AND PACKING
MATERIAL UNTIL AFTER ASSEMBLY IS COMPLETED. SELECT A CLEAN,
SMOOTH SURFACE TO WORK (SUCH AS CARPET).
THEN, FOLLOW THE EASY STEPS BELOW.
MADE IN BRAZIL
16 02 08 2
30 Min.
IF PARTS ARE MISSING, PLEASE CALL 1-800-998-7021 FOR INFORMATION.
SKU # 2048100210 (Black)

Top
Left Side
Right Side
Rail
Description
1
2
3
4
5
6
7
8
9
10
11
12
Part#
1
1
1
1
7
7
7
7
7
1
Qty Sizes (w x d x h)
14 15/16¨
13 3/4¨
13 3/4¨
X
X
X
X
X
X
X
X
X
X
X
20 1/4¨
47 3/4¨
47 3/4¨
23/32¨
1 3/16¨
1 3/16¨
X
X
X
X
X
X
X
X
X
X
X
1
X X
10
Back Panel 4 3/5¨14 2/5¨ 19/32¨
2
3
4
5
6
7
810
12
x7
9
4
4
4
4
4
4
4
4
4
11
Bottom Panel1 12 5/8¨15 15/16¨ 1/8¨
1 9/16¨
15 15/16¨ 11/16¨
Front Rail 2 1/2¨
15 15/16¨ 11/16¨
Drawer Front 5¨
15 13/16¨ 9/16¨
Left Drawer Side 4 5/8¨
11 13/16¨ 9/16¨
Right Drawer Side 4 5/8¨
11 13/16¨ 9/16¨
Drawer Bottom 11 3/4¨
14 7/8¨ 1/8¨
Drawer Back 4 5/8¨
14 7/16¨ 9/16¨

F
E
D
C
B
A
1/16¨ x 7/8¨
7
9/64¨ x 1 2/5¨
26
56
1/4¨ x 1 3/16¨
26
26
52
HARDWARE PACK
G
H
I
7
7
7
1/8¨ x 1 1/4¨
1/8¨ x 15/16¨

S T E P 1
A
X46
B
X26
1. Prepare for future assembly by:
* Insert wood dowels (A) into all drawer sides (7) & (8)
* Insert wood dowels (A) into all rails (4)
* screw mini-fix pins (B) into the top panel (1)
* screw mini-fix pins (B) into the side parts (2) & (3)
X7
X9
X7
3
21
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A
A
A
A
AA
AA
B
B
4
4
8
9

S T E P 2
S T E P 3
2. Using the dowels and mini-fix pins previously attached in step
1 as guide, assemble the rails (4)to side (2) as shown. Next align
and attach the side (3) making sure all dowels and holes are matched
up. Secure the rails to the sides using mini-fix drums (C) in a
clockwise motion as shown:
C
3. Turn your upside down, then secure the last rail (4)
using mini-fix drums (C). Then attach the front rail (5) to the
bottom rail (4) using the mini-fix pins as guides, secure using
mini-fix drums (C) as shown.
chest
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
X16
C
X06
C
2
3
4
4
4
4
4
4
4
4
4
2
3
9
4
4
4
4
10
5

S T E P 4
S T E P 5
4. Secure the bottom panel (6) using nails (E) as shown.
5. Turn your upright again, insert wood dowel (A) into the
side top holes. Then, attach the top panel (1) and secure
using mini-fix drums (C)as shown.
chest
E
E
E
E
E
E
A
A
A
A
C
C
C
C
E
X6
A
X4
C
X4
2
3
1
6

S T E P 6
S T E P 7
6. Using dowels as your guide, aling and attach a left (8) and a
right (9) drawer side to a drawer front (7) as shown. Secure using
screws (D) as shown.
7. Slide in the drawer bottom (10) as shown.
D
X28
D
D
D
x7
x7
7
8
9
10

S T E P 8
S T E P 9
8. Align and attach the drawer back (11) as shown, secure using
screws (D).
9. Attach the drawer knobs (F) to the drawer front (7) using screws
(G) as shown. Then, attach the plastic drawer stop (H) to the drawer
back (11) using screw (I) as shown.
D
X28
x7
D
D
D
D
F
X7
G
X7
H
X7
I
X7
H
I
H
I
F
G
x7
11
7
11
11

S T E P 10
S T E P 11
10. Slide in the drawers. To remove the drawer you must press
down the drawer stop as shown.
11. Complete the assembly of your nighstand by nailing the back panel
(12) using nails (E).
E
X20
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
12
7
7
7
7
7
7
7

S T E P 1
S T E P 2
• When properly installed, this hardware can provide
protection against the unexpected tipping of furniture.
• Attach one of the mounting brackets “D” securely to
the back top edge of the unit using the short screw “E”.
• Mark the location on the wall for mounting the second bracket "D".
Drill the appropriate sized hole in the wall and insert the plastic screw anchor "C".
Then secure the bracket to the wall using screw "B".
• Place the unit so the bracket on the back edge of unit is in line with the bracket on the wall.
Instructions
Tipping restraint
B
D
C
D
E
A
• Lace the end of the nylon restraint strap “A” through
each bracket. Bring both ends together and slide the beaded
end of the strap through the keyhole shaped slot on the other
end. Pull down on the beaded end until it snap-locks into the keyhole.
• Check to make sure the strap is securely laced and locked to the brackets.
TIPPING RESTRAINT
HARDWARE
AA
A1
EE
E1
Ø6
CC
C1
BB
B1
DD
D2
•
•
•
•
•
1 nylon strap
1 ½”screw
1 plastic screw anchor
2 wall brackets
1 small screw