Home Decorators Collection 9467810417 User manual

ASSEMBLY INSTRUCTIONS OF CHENNAI KING BED
(SKU No.: 9467810417 / ) 9467810418 / 9467810419
Bolts:8+2 Pcs Allen Key:1 Pc
Spring washers:
8+2 Pcs
Head Board - 01 Pc Foot Board - 01 Pc.
Center Rail - 01 Pc.
Side Rail - 02 Pcs.
Wooden Slats - 10 Pcs.
CAC-2015-23
Page 1
Due to the beautiful and intricate solid
wood carved headboard’s weight, we
recommended you place this bed
against a wall.
Safety Instructions
HARDWARE ENCLOSED:
6. Allen Bolts - 08 Pcs.
7. Washer - 08 Pcs.
8. Allen Key - 01 Pc.
PARTS INCLUDED:
1. Head Board - 01 Pc
2. Foot Board - 01 Pc.
3. Side Rail - 02 Pcs.
4. Center Rail - 01 Pc.
5. Wooden Slats - 10 Pcs.
CARE INSTRUCTIONS
1) Clean with a dry cloth.
2) Do not use any chemical to polish the product.
PRE-ASSEMBLY
1. Please read all instructions carefully before beginning assembly.
2. Remove all parts and hardware from the box and lay out on a clean,
carpeted or scratch-free work surface, as this will avoid damaging
any parts during assembly.
3. The shipping box provides an ideal work surface. Do not dispose any
contents until assembly is completed to avoid accidentally
discarding parts or hardware.
4. We recommend adult assembly by two people for your safety.

Fig. 1
1
3
4
5
2
4
Fig. 2 67
8
1
2
3
3
4
A
A
D
B
B
C
C
D
4
Fig. 3
CAC-2015-23
Page 2
ASSEMBLY INSTRUCTIONS:
Final View
Fig. 4
ASSEMBLY INSTRUCTIONS OF CHENNAI KING BED
(SKU No.: 9467810417 / ) 9467810418 / 9467810419
Step 1:Take out all parts supplied on a clean surface as shown
in fig. 1.
Step 2: Take out the bolts, washers and Allen key provided in
the Hardware Pack.
Step 3:Match Side Rail to Head Board 'A' to 'A' & Foot
Board 'D' to 'D'.
insert into the board & tighten with allen key provided
Put washer on to a bolt and
as shown in figure 2.
Step 4: Match another Side Rail to Head Board 'B' to 'B'
& Foot Board 'C' to 'C'. Put washer on to a bolt and
insert into the board & tighten with allen key provided
as shown in figure 2.
Step 5: After assembling Side Rails to head board and foot
board, place as shown in fig. 3.
Step 6: Place the wooden slats as shown in fig. 4.
the Center Rail