Home Decorators Collection BF-24671 MSL User manual

1/11
BF-24671 MSL FLAT-FILE CABINET W/SHELF 36"Hx42"W
Made In China
ASSEMBLY INSTRUCTIONS

SMALL
DRAWER BACK PANELS-2PCS
DRAWER SIDE PANELS-2PCS
SMALL LEFT
LARGE
DRAWER PANEL FTONT-1PC
ACROSS PANELS-3PCS
SHELF PANEL-1PC
Follow instructions listed below in proper sequence as
or damaged,phone,fax,or mail to our Customer Service Department.For
efficient and speedy service please indicate the model number and
numbered to assure fast,easy and correct assembly.
IMPORTANT NOTE:
code letter of part(s)need
Thank you for purchasing this quality product.Be sure to check all packing
carton during shipment. Count all parts and material hardware,Compare
with parts list to be sure all part are present.If any parts are missing
material carefully for small parts,which may have came loose inside the
K
HI
L
BACK PANEL-1PC
LEFT SIDE PANEL-1PC
E
B
F
C
DRAWER PANEL FTONTS-2PCS
SMALL
RIGHT SIDE PANEL-1PC
2/11
DRAWER SIDE PANELS-2PCS
SMALL RIGHT
ADORNING PANEL-1PC
J
G
D
A
TOP PANEL-1PC
PARTS LIST

3/11
KNOBS-6PCS
WV
TS
B1 C1
ZY
X
U
DOWELS-6PCS
A1
NM
QP
O
R
DRAWER SIDE PANEL-1PC
LARGE LEFT DRAWER SIDE PANEL-1PC LARGE RIGHT BOTTOM PANELS-3PCS DRAWER
SUPPORT PANELS-6PCS
DRAWER SHORT ACROSS PANELS-4PCS SMALL DRAWER LONG ACROSS PANELS-2PCS SMALL DRAWER
DRAWER STAND PANELS-2PCS
SMALL SHORT ACROSS PANELS-4PCS
LARGE DRAWER LONG ACROSS PANELS-2PCS
LARGE DRAWER
DRAWER STAND PANELS-2PCS
LARGE CAM-BOLTS-26PCS CAM-LOCKS-26PCS
CAM-TOOL-1PC
FEET-4PCS SCREWS-3PCS SCREWS-42PCS
D1

J1
WRENCH-1PC
NOTE:THE SURFACE WITH THE STICKER IS THE BACK SIDE.
LARGE
DRAWER BACK PANEL -1PC
INNER SLIDES-6PCS
OUTER SLIDERS-6PCS
SCREWS-6PCS
SCREWS-48PCS
G1F1E1
I1H1
4/11

G1
H1
5/11
SEPARATE THE GLIDE
SIMPLY PULL THE LEFT/RIGHT INNER GLIDES FROM THE OUTER GLIDES EXPOSING A SMALL
PRIOR TO ASSEMBLY,WE SUGGEST SEPARATING THE INNER GLIDES FROM THE OUTER-GLIDES,
BLACK SAFELY RELEASE TAB ,BY PUSHING THE SAFETY RELEASE TAB.YOU WILL BE ABLE TO
SAFETY RELEASE TAB
HOW TO SEPARATE GLIDES

NOTE:
LEAST TWO PEOPLE.
NOTE:
ARROW
ARROW
NOTE:
W
X
HOW TO USE THE CAM-TOOL
SHOULDER
6
/
11
TURN THE CAM-BOLT SCREWS UNTIL THEY
THE ARROWS ON THE HIDDEN CAM-LOCKS SHOULD POINT TO THE CAM-BOLTS
AGAINST THE SURFACE OF THE PART.
ARE TIGHT, THE SHOULDER SHOULD BE
TO PREVENT DAMAGE DURING ASSEMBLY,PLEASE ASSEMBLE THIS ITEM WITH AT
UPON OPENING THOROUGHLY CLEAN ALL WOODS SURFACES TO REMOVE DUST
AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT.IN ORDER

B
7/11

C1
J1
8/11

9/11

10/11