Home Decorators Collection BF-25413 User manual

1/4
HOME
ASSEMBLY INSTRUCTIONS
C O L L E C T I O N
Made In China
BF-25413 SHERIDAN JEWELRY ARMOIRE 40"Hx20"Wx12"
INV#81887

NOTE:THE SURFACE WITH THE STICKER IS THE BACK SIDE.
2/4
A
D
PLASTIC BELT-1PC
CABINET-1PC
E
GECKOS-2PCS
HOOKS-2PCS
F
SCREWS-2PCS
SCREWS-2PCS
PARTS LIST
B C 6mm*3/4"
7mm*7/8"
Thank you for purchasing this quality product. Be sure to check
all packing material carefully for small parts, which may have
came loose inside the carton during shipment. Count all parts
and material hardware then compare with parts list to be sure all
parts are present.If any parts are missing or damaged,phone, fax
or mail to our Customer Service Department for efficient and
speedy service. Please indicate the model number and code letter
of part(s) needed.
IMPORTANT NOTE:Follow instructions listed below in proper
sequence as numbered to assure fast, easy and correct assembly.

2). ASSEMBLE THE ANTI-TIP HARDWARE.
DRILL 2 HOLES INTO THE WALL, PLEASE REFER TO THE REAR TOP PANEL'S HOLE DISTANCE
PUT 2 GECKOS(D) INTO THE HOLES IN THE WALL AND ROTATE 2 SCREWS(E) INTO THE
CONNECT THE TWO HOOKS(B) WITH A PLASTIC BELT(F).
AND HEIGHT.
GECKOS(D).
4/4
A
E
B
F
WALL
D
B