Home Decorators Collection FRS80633-ST User manual

page 1-9
NANTUCKET COFFEE TABLE
Please read over this instruction manual as it will save time in the
assembly of this product.
Note: Prior to assembly, please open and lay parts out on a clean, soft
flat surface to avoid any damages to the product’s finish.
HDC#:TBD MFG#:FRS80633-ST

page 2-9
Caution:
The Nantucket Coffee Table was made for the explicit purpose of
providing outdoor functions and is not to be used as a toy. This product
is not intended for inclement /severe weather in any form including, but
not limited to: rain, hail, sleet, snow and/or wind. Manufacturer
recommends that with formidable weather approaching you store and/or
cover this coffee table. Do not locate structure near any open flame. Do
not use structure as a support. Do not shake, lean or climb on structure.
Children under age of 10, near the structure, should be supervised by a
competent adult at all times. This product is NOT intended for
commercial use and will void the warranty.
WARRANTY
Yotrio Corporation, City of Industry, CA. 91748, extends two years frame
and wicker limited warranty to the original purchaser as a sign of our
dedication to the highest possible quality standards. The warranty is
designed to cover the coffee table under normal residential use. This
Warranty is non-transferable and void if the furniture is used in
non-residential environment and/or has been abused. The warranty also
becomes void in the event the coffee table has been damaged by acts of
God, calamity or misuse. This warranty does not cover in the event of
inclement weather such as rain, hail, sleet, snow or wind. We reserve the
right to make substitutions with similar merchandise, if the model in
questions is no longer in production. The manufacturer recommends
that with ANY formidable weather approaching you disassemble and
store your coffee table in a safe location.
CARE AND MAINTENANCE:
For best results, clean the table with damp cloth and dry thoroughly. This
will help prevent mildew by removing dirt particles that may accumulate.
Do not use abrasive materials or cleaners. In order to prolong the life of
your coffee table, when not in use or in inclement weather (rain, hail,
sleet, snow, wind), fire, extreme heat and freezing conditions, the coffee
table needs to be stored in a dry, sheltered place.

page 3-9
DO NOT RETURN TO RETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE AT:
www.homedecorators.com
OR TOLL FREE AT:
1-800-245-2217
MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME / 11:30
AM TO 8:00PM EASTERN STANDARD TIME
Warranty Coverage Requirements:
1. Copy of your Original Store Receipt.
2. Pictures of the damaged parts.
3. You must know the name of your product and any corresponding
item numbers as well as the name of the store where you
purchased the item.
4. Please gather all of this information BEFORE you call customer
service.

page 4-9
Parts Check List
Please remove all parts carefully from box and lay out on clean, soft
surface to protect product’s finish.
Table Top – 1PC Shelf – 1PC
Table Leg– 4PCS
Glass - 1PC
①
②
③
④

page 5-9
A. M6X40Bolt - 8PCS+1 B. M6X35 Bolt – 4PCS+1
C. M6 Washer – 12PCS+1
D. Hex Wrench – 1PC

page 6-9
1. Lay the table top (1) upside down on a soft surface. Attach
the table leg (3) to the table top (1) using M6x40 bolts (A)
and M6 washers (C). Use the hex wrench (D) to loosely
tighten all the bolts. Repeat this step for the other three
table legs.
Do not fully tighten all the bolts!

page 7-9
2. Attach the shelf (2) to the chair legs (
3
) using M6x35 bolts
(B) and M6 washers (C). Use the hex wrench (D) to loosely
tighten all the bolts.
Do not fully tighten all the bolts!

page 8-9
3. Once all the bolts are in place. Fully tighten all the bolts with
the hex wrench (D). Turn the table right side up and then
place the glass (4) on the table top (1).

page 9-9
4. Check to ensure the table is tightly assembled and stable
before use.

páginas 1-9
MESA DE CENTRO NANTUCKET
Lee este manual de instrucciones, ya que te ahorrará tiempo al
ensamblar este producto.
Nota: Antes del ensamblaje, abre la caja y coloca las piezas sobre una
superficie limpia y suave para evitar daños al acabado del producto.
NÚM. DE HDC: TBD NÚM. DE FABRICANTE: FRS80633-ST