Home Decorators Collection Lake Adela User manual

LAKE ADELA RECTANGLE WOVEN
DINING TABLE
Please read over this instruction manual as it will save time in the
assembly of this product.
Note: Prior to assembly, please open and lay parts out on a clean, soft
flat surface to avoid any damages to the product’s finish.
HDC#:1928810829 MFG#:FRA60408AS-ST-CH

Caution:
The Lake Adela Dining table was made for the explicit purpose of
providing outdoor functions and is not to be used as a toy. This product
is not intended for inclement /severe weather in any form including, but
not limited to: rain, hail, sleet, snow and/or wind. Manufacturer
recommends that with formidable weather approaching you store and/or
cover this dining table. Do not locate structure near any open flame. Do
not use structure as a support. Do not shake, lean or climb on structure.
Children under age of 10, near the structure, should be supervised by a
competent adult at all times. This product is NOT intended for
commercial use and will void the warranty.
WARRANTY
Yotrio Corporation, City of Industry, CA. 91748, extends five years frame
limited warranty to the original purchaser as a sign of our dedication to
the highest possible quality standards. The warranty is designed to
cover the dining table under normal residential use. This Warranty is
non-transferable and void if the furniture is used in non-residential
environment and/or has been abused. The warranty also becomes void
in the event the dining table has been damaged by acts of God, calamity
or misuse. This warranty does not cover in the event of inclement
weather such as rain, hail, sleet, snow or wind. We reserve the right to
make substitutions with similar merchandise, if the model in questions is
no longer in production. The manufacturer recommends that with ANY
formidable weather approaching you disassemble and store your table in
a safe location.
CARE AND MAINTENANCE:
For best results, clean the table with damp cloth and dry thoroughly. This
will help prevent mildew by removing dirt particles that may accumulate.
Do not use abrasive materials or cleaners. In order to prolong the life of
your table, when not in use or in inclement weather (rain, hail, sleet,
snow, wind), fire, extreme heat and freezing conditions, the table needs
to be stored in a dry, sheltered place.

DO NOT RETURN TO RETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE AT:
www.yotrioint.com
OR TOLL FREE AT:
1-800-245-2217
MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME / 11:30
AM TO 8:00PM EASTERN STANDARD TIME
Warranty Coverage Requirements:
1. Copy of your Original Store Receipt.
2. Pictures of the damaged parts.
3. You must know the name of your product and any corresponding
item numbers as well as the name of the store where you
purchased the item.
4. Please gather all of this information BEFORE you call customer
service.

Parts Check List
Please remove all parts carefully from box and lay out on clean, soft
surface to protect product’s finish.
Table Top – 1PC
Long Skirt – 2PCSShort Skirt - 2PCS
Table Leg - 4PCS
①
②
③
④

A. M6X15 Bolt – 16PCS
B. M6X25 Bolt – 16PCS
C. M6 Washer – 32PCS D. Hex Wrench – 1PC

1. Attach the table leg (2) to the long skirt (4) and short skirt
(3) using M6x25 bolts (B) and M6 washer (C). Use the hex
wrench (D) to loosely tighten all the bolts. Repeat this step
for the other table legs.
Do not fully tighten all the bolts!

2.
Lay the table top (1) upside down on a soft surface.Connect
the table leg (2) to the table top (1) using M6x15 bolts (A) and
M6 washers (C). Use the hex wrench (D) to loosely tighten all
the bolts. Repeat this step for the other table legs.
Do not fully tighten the bolts!

3.Once all the bolts are in place. Fully tighten all the bolts with
the hex wrench (D). Turn the table right side up. Check to
ensure the table is tightly assembled and stable before use.