Home Decorators Collection LAREDA 2206VA48-201900 User manual

ASSEMBLY INSTRUCTIONS
LAREDA 48 IN. W X 22 IN. D BATH VANITY
Questions, problems, missing parts?
Before returning to the store, call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-800-998-7021
HOMEDEPOT.COM/HOMEDECORATORS
Item #1005090223/1005090219/
1005090213/1005090215
Model #2206VA48-201900/2206VA48-201901/
2206VA48-242900/2206VA48-242901
THANK YOU
We appreciate the trust and condence you have placed in Home Decorators Collection through the purchase of this bathroom furniture.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Home Decorators Collection!

2
Table of Contents
Table of Contents ...................................2
Safety Information ..................................2
Warranty ..........................................3
Limited Lifetime Warranty ...........................3
What is Covered...................................3
What is Not Covered ...............................3
Minnesota Residents ................................3
Pre-Installation.....................................4
Planning Installation ...............................4
Tools Required ....................................4
Hardware Included.................................4
Package Contents .................................5
Installation ........................................6
Care and Maintenance ..............................13
Service Parts......................................14
Safety Information
DANGER
□Keep small parts away from children during assembly.
□Failure to follow warnings and cautions could result in serious
injury.
□DO NOT use harsh bathroom cleaners or grout cleaners on any
natural stone.
WARNING
□Read these instructions carefully and keep in a safe place.
□Adult assembly required.
□This product should only be used on a at, level surface.
□Do not over tighten connectors (screws, bolts, etc.) Overtightening
can lead to product damage.
□Small parts may present choking hazard prior to assembly.
□Do not stand, step or climb on unit.
CAUTION
□USE preventative cleaning measures to keep your stone pristine.
□USE sealers according to the product specic directions.
□Blot spills quickly, and wash with mild soap and warm water.
□Stone countertop is surprisingly resilient to stains and scratches.
However, as a preventative measure, any spills on the stone
surfaces should be wiped up within a reasonable amount of time.
Do not let liquid sit on the stone overnight. Stones are most prone
to staining by oil and acid, so be sure to blot these spills up as soon
as they happen. Follow up by cleaning the stone with a mild
non-abrasive soap and water.
□Be sure to check all packing materials carefully for small parts that
may have come loose inside the carton during shipment. If parts
are missing, contact THE HOME DEPOT to obtain any missing parts.
□Using abrasive cleansers will damage the surface.

3 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-998-7021 for further assistance.
Warranty
LIMITED LIFETIME WARRANTY
WHAT IS COVERED
Home Decorators Collection products are manufactured with superior quality standards and workmanship and
are backed by our limited lifetime warranty. Home Decorators Collection products are warranted to the original
consumer purchaser to be free of defects in materials or workmanship. We will replace FREE OF CHARGE any
product or parts that proves defective. Simply, return the product / part to any of The Home Depot retail locations
or call 1-800-998-7021 to receive the replacement item. Proof of purchase (original sales receipt) from the
original consumer purchaser must be made available for all Home Decorators Collection warranty claims.
WHAT IS NOT COVERED
This warranty excludes incidental/consequential damages and failures due to misuse, abuse or normal wear
and tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby
extended a ve-year limited warranty from the date of purchase, with all other terms of this warranty applying
except the duration of warranty. Some states and provinces do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitations may not apply to you. This warranty gives you specic legal
rights and you may also have other rights that vary from state to state and province to province. Please see a
store or contact 1-800-998-7021 for more details.
Minnesota Residents
“IMPORTANT HEALTH NOTICE.
SOME OF THE BUILDING MATERIALS USED IN THIS HOME (OR THESE BUILDING MATERIALS) EMIT FORMALDEHYDE. EYE, NOSE, AND
THROAT IRRITATION, HEADACHE, NAUSEA AND A VARIETY OF ASTHMA-LIKE SYMPTOMS, INCLUDING SHORTNESS OF BREATH, HAVE BEEN
REPORTED AS A RESULT OF FORMALDEHYDE EXPOSURE. ELDERLY PERSONS AND YOUNG CHILDREN, AS WELL AS ANYONE WITH A HISTORY
OF ASTHMA, ALLERGIES, OR LUNG PROBLEMS, MAY BE AT GREATER RISK. RESEARCH IS CONTINUING ON THE POSSIBLE LONG-TERM
EFFECTS OF EXPOSURE TO FORMALDEHYDE.
REDUCED VENTILATION MAY ALLOW FORMALDEHYDE AND OTHER CONTAMINANTS TO ACCUMULATE IN THE INDOOR AIR. HIGH
INDOOR TEMPERATURES AND HUMIDITY RAISE FORMALDEHYDE LEVELS. WHEN A HOME IS TO BE LOCATED IN AREAS SUBJECT TO EXTREME
SUMMER TEMPERATURES, AN AIR-CONDITIONING SYSTEM CAN BE USED TO CONTROL INDOOR TEMPERATURE LEVELS. OTHER MEANS OF
CONTROLLED MECHANICAL VENTILATION CAN BE USED TO REDUCE LEVELS OF FORMALDEHYDE AND OTHER INDOOR AIR CONTAMINANTS.
IF YOU HAVE ANY QUESTIONS REGARDING THE HEALTH EFFECTS OF FORMALDEHYDE, CONSULT YOUR DOCTOR OR LOCAL HEALTH
DEPARTMENT.”

4
Pre-Installation
PLANNING INSTALLATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents
list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 45 minutes (24 hours for silicone caulk to dry).
TOOLS REQUIRED (NOT INCLUDED)
Phillips
Screwdriver Utility Knife Silicone Caulk
Power Drill
With Drill Bit Measuring Tape Level
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
—AA —BB —CC —DD —
EE
—
FF
—
GG
—
HH
—
LL
Part Description Quantity
AA Bolt 4
BB Sink Bracket 4
CC Nut 4
DD Lock Washer 4
EE Wrench 1
FF Short Handle-Champagne Bronze
(Optional) 2
GG Long Door/Drawer Handle-
Champagne Bronze (Optional) 5
HH Touch-up Pen 1
LL Shelf Pin 12

5 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-998-7021 for further assistance.
Pre-Installation (continued)
PACKAGE CONTENTS
A
D
C
B
Part Description Quantity Carton
A Vanity 1 2 of 2
B Top 1 1 of 2
C Backsplash 1
D Sink 1 2 of 2

6
Installation
1 Installing Hardware
NOTE: Your vanity comes with brushed nickel handles (FF,GG) that are pre-installed on the inside of the cabinet to prevent against
shipping damage. If you would like to change them, locate the included champagne bronze handles (FF,GG) and use them in these
steps.
□Use a screwdriver to loosen the screws and remove the hardware, being sure to retain the screws.
□Align the pulls on outside of the door, and re-install using the included screws.
2
2
1
1

7 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-998-7021 for further assistance.
Installation (continued)
2 Installing vanity cabinet
NOTE: Clean area where the vanity (A) will be permanently located prior to beginning installation, ensuring the vanity (A) will not
interfere with any water supply and drain lines once mounted.
□With two people, carefully place the vanity (A) against the wall in its nal location. Place a level on the unit in both directions,
across the front and on both sides to properly adjust the levelers on the unit. Use preassembled levelers on the feet of the vanity
(A) to level the item. Twisting the levelers counterclockwise will increase the height of the vanity (A), twisting them clockwise will
decrease it.
□Find and mark locations of wall studs behind the permanent location of the vanity (A). From inside the vanity (A), drill a hole
through the vanity mounting area into wall studs.
□Using mounting hardware (not included) appropriate for your installation site, secure the vanity (A) to the wall stud. If possible,
secure the vanity (A) to two wall studs for increased stability.
WARNING:
□Vanity (A) MUST be secured to wall studs.
A
Vanity
Mounting
Area
1 2

8
Installation (continued)
3 Unpacking the top
□Take out the top (B) and backsplash (C) according to the
steps indicated by the drawings, and place them face down
onto a scratch free surface such as a foam sheet that came
in the packaging.
Remove the top foam sheet
Remove the foam sheet
Remove the cutout foam
sheet & hardware
Remove the top and place it
on a scratch free surface
Remove the backsplash and place
it on a scratch free surface
C
C
Foam sheet
B
BACK
FRONT
B
Foam sheet
BACK
FRONT
Hardware
Pack
B
BACK
FRONT
12
4 Mounting the sink
□Apply silicone caulk (not included) to the top edge of the
sink (D). With the help of another adult, lower the sink onto
the back side of the stone top.
NOTE: Make sure the sink over-ow hole is facing the
front of the stone top. Be sure to align the sink well with
the stone top cut out allowing for equal stone overhang
on the front, back and sides of the ceramic sink (D).
NOTE: To install the sink onto the top correctly, ensure
that the two “BACK” stamps on the sink and the top are
aligned on the same sides. Use the guide lines marked
on the sink and bottom side of the stone top to assist
with sink location.
2
2
BACK
BACK
D
B
BACK
1
Sink Lip
Top
BACK
BACK

9 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-998-7021 for further assistance.
Installation (continued)
5 Installing the sink
□Screw bolts (AA) into the threaded holes of the stone top
(B).
AA
D
B
BACK
BACK
6 Attaching the sink brackets
□Lower the sink brackets (BB) over the bolts (AA) and allow
to rest on the sink lip.
□Adjust the location of the bracket to rmly grasp the sink
lip.
□Lower lock washers (DD) over bolts (AA) and secure with
nuts (CC). Hand tighten nuts (CC) with the included wrench
(EE).
NOTE: DO NOT OVER TIGHTEN!
NOTE: Check that the sink placement is well centered
front to back and side to side of the stone top cut out
before allowing the silicone caulk to dry. If the sink is not
centered well, unscrew sink clamps, re-adjust the sink
position and re-tighten the sink brackets.
1
BB
EE CC
DD
AA
3
2
D
B
BACK
BACK

10
Installation (continued)
7 Installing the top
□Apply silicone caulk to the top edge of the wood cabinet.
□With the help of another adult, gently lower the stone top with the assembled sink onto the cabinet.
NOTE: Make sure the stone top is ush with the back side of the wood cabinet and the stone overhang is equal on both sides over
the wood cabinet left and right side walls. Remove any excess caulk before allowing to dry.
NOTE: It may be easier to install the faucet and/or drain assembly (not included) before securing the stone top to the wood
cabinet.
1
2
2
B
A
8 Installing the backsplash
□Apply silicone caulk (not included) to the unpolished side and bottom of the backsplash (C).
□Position the backsplash (C) on top (B) and against the wall.
□Clean any excess caulk before allowing to dry.
22
B
C
A
1