Home Decorators BF-20939 User manual

Collection
Home Decorators
BF-20939 HAMPTON BAY TRIPLE TIT-OUT HAMPER
ASSEMBLY INSTRUCTIONS
Made In China
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.

B1BA
IMPORTANT NOTE:
code letter of part(s)need
numbered to assure fast,easy and correct assembly.
material carefully for small parts,which may have came loose inside the
with parts list to be sure all part are present.If any parts are missing
carton during shipment. Count all parts and material hardware,Compare
Thank you for purchasing this quality product.Be sure to check all packing
efficient and speedy service please indicate the model number and
or damaged,phone,fax,or mail to our Customer Service Department.For
PARTS LIST
Follow instructions listed below in proper sequence as
H
J
E
G
I
D
F
H1
C
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.

XW
LM
OP
RS
K
N
Q
TUV
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.

NOTE: UPON OPENING THOROUGHLY CLEAN ALL WOODS SURFACES TO REMOVE DUST
THE ARROWS ON THE HIDDEN CAM-LOCKS SHOULD POINT TO THE CAM-BOLTS
NOTE:
ARROW
TO PREVENT DAMAGE DURING ASSEMBLY,PLEASE ASSEMBLE THIS ITEM WITH AT
AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT.IN ORDER
AGAINST THE SURFACE OF THE PART.
ARE TIGHT, THE SHOULDER SHOULD BE
TURN THE CAM-BOLT SCREWS UNTIL THEY
ARROW
K
HOW TO USE THE CAM-TOOL
L
LEAST TWO PEOPLE.
SHOULDER
NOTE:
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.

H
G
2
O
F
G
V
V
P
1
H
4
V
H1
I
1)
1
3
3
4
2
ASSEMBLE DIRTY CLOTHING BUCKET
INSERT BASE PANEL(I)INTO SLOT IN SIDE PANEL(G)INTO PANEL(H).
ATTACH SIDE PANEL(G)TO STICK PANEL(H)USING SCREWS(V).
ATTACH STICK PANEL(H)USING 6 SCREWS(V)AND ATTACH KNOB(O)UISNG SCREWS(P).
ATTACH BACK PANEL(H1)TO SIDE PANEL(G)USING SCREWS(V).
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.

3).ASSEMBLE SIDE PANEL(B/B1)AND STAND PANEL(J).
ROTATE THE 8 CAM-BOLTS(L)INTO HOLES IN BOTTOM PANEL(D).
INSERT 4 DOWELS(Q)INTO HOLES IN BAFFLE PANEL(C)AND SIDE PANEL(B/B1).
PLACE CAM-BOLTS(L)INTO HOLES IN PANEL(B/B1/J)AND ATTACH USING 8 CAM-LOCK(K).
2).ASSEMBLE THE FEET(M).
ATTACH 6 FEET(M)TO BOTTOM PANEL(D)USING SCREWS(N).
Q
T
M
N
D
D
L
K
C
B1
J
J
B
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.

A
V
K
4).ASSEMBLE TOP PANEL(A).
ROTATE THE 8 CAM-BOLTS(L)INTO HOLES IN TOP PANEL(A).
ATTACH BAFFLE PANEL(C)USING SCREWS(V)IN THE PREDRILLED HOLES OF TOP PANEL(A).
PLACE CAM-BOLTS(L)INTO HOLES IN PANEL(B/B1/J)AND ATTACH USING 8 CAM-LOCK(K).
L
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.

W
R
G
NOTE: THE METHOD IS FIT FOR ANOTHER BUCKET.
5).
PUT THE BAG(W)INTO THE BUCKET.
INSERT THE HINGE(R)INTO HOLES IN(BUCKET)SIDE PANEL(G).
PLACE THE HINGE(R)BETWEEN INTO HOLES IN SIDE/STAND PANEL(B/B1/J).
ASSEMBLE DIRTY CLOTHING BUCKET.
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.

S
E
E
X
V
6).ASSEMBLE THE BACK PANEL(E).
ATTACH THE BACK PANEL(E)AND REAR PANEL GUIDE(X)USING SCREWS(S/V).
INSERT THE BACK PANEL(E)INTO SLOT IN REAR PANEL GUIDE(X).
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.

Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.

文件名: BF-20939
目录: D:\Administrator 文档和收藏夹
模板: C:\Documents and Settings\Administrator\Application
Data\Microsoft\Templates\Normal.dot
标题:
主题:
作者: Administrators
关键词:
备注:
创建日期: 2007-3-23 10:22:00
修订号: 3
上次保存日期: 2007-3-23 10:40:00
上次保存者: Administrators
编辑时间总计: 1 分钟
上次打印时间: 2007-3-23 10:48:00
打印最终结果
页数: 10
字数: 41 (约)
字符数: 239 (约)
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.