Home Styles Orleans 88 5061 95 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
88 5061 95
The Orleans
Kitchen Cart
Tools required for assembly : Phillips screwdriver
A.
Top Unit
1 Pc.
B.
Leg
2 Pcs.
D.
Shelf
2 Pcs.
C.
Leg
2 Pcs.
Hex Wrench
1 Pc.
Caster
Two with lock and
Two without lock
4 pcs.
Small Hex Wrench
1 Pc.
Head Cap Bolt (short)
16 Pcs.(+1 extra)
Head Cap Bolt (long)
8 Pcs. (+1 extra)
Head Cap Bolt
for Side Bar
4 Pcs. (+1 extra)
Wood Screw
4 Pcs. (+1 extra)
Side Bar
2 Pcs.

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
STEP 1
Remove the drawers, then place Top unit (A) upside down on a soft cloth.
STEP 2
Attach Legs (B) and Legs (C) to Top Unit (A) with Wood Screws
and Head Cap Bolts (long).
Tighten all Bolts only half way with Hex Wrench.
(See figure 1)
A
A
B
B
C
C
Figure 1
/4
Wood Screw
Head Cap Bolt (long)

Assembly Instructions 3
STEP 3
Attach Shelves (D) to unit from Step 2 with Head Cap Bolts (short).
Tighten all Bolts.
STEP 4
Attach Casters underneath the legs of unit, with the Locking Casters to the front.
(See figure 2)
Head Cap Bolt (short)
Locking Caster
Non-Locking Caster
D
D
Figure 2
/4

Assembly Instructions 4
Side BarHead Cap Bolt
for Side Bar
STEP 5
Turn the unit to its’ upright position.
Attach Side Bars to unit with Head Cap Bolts for Side Bar.
STEP 6
Remove the Knobs that are on the inside of the
drawers and attach to the outside of the drawers with
Machine Screws.
STEP 7
Slide drawers into position.
Locking Caster
/4