HOME8 WPS1200 User manual

What’s inside:
Smart Plug
Add-on Device
Quickstart Guide
Model No. WPS1200
All Home8 add-on devices have to work with Home8 systems.
1x Smart Plug*
* Power socket type depends on regional standard, please refer to actual
Smart Plug in the package.

English
Step 1: Assemble your device and accessories
1. Unpack your device and accessories.
2. Pair the device with the Security Shuttle within 1-10 feet to make sure the connection
is working well.
3. Plug the Smart Plug into power outlet.
Step 2: Add a device
Note: If the scan is incomplete, you will be asked to enter the serial number (SN) of the device.
1-10 ft
1. Open the Home8 app, tap on the menu button " " and select “Add Device ”.
2. Find QR Code on the device, scan the QR Code, and follow the on-screen instructions.
3. Set Location: if you have multiple systems, select the location for the device to be added.

English
Step 3: Test the range of your device
Before you use your device, see if it's within Security Shuttle's range.
1. Take your device to the room you want to use it in.
2. Open the Home8 app, tap on the "Automation" tile in the main screen, then
press the on/off button of your device. The LED should turn on/off. If you receive
a push notification saying "Switch is turned on/off", it's within range.
Plug the device to be controlled to the Smart Plug, schedule on/off timeline. The
Smart Plug can control electronic appliances like door lamps or fans, it also tracks
the energy consumption during operation.
Manual on/off button

FAQ
How can I backup recorded video?
You can backup your recorded video by using any of the following methods.
- By setting automatic backup to Dropbox. (Dropbox account needed)
- By sharing your recorded video from VideoGram to your appointed method.
How can I be certain my personal information is secured?
Our first level of security is authentication and your password is encrypted when you sign in to your
account. At the next level where all data is transmitted, including videos, images, as well account
information, bank-level AES data encryption is used.
How do I retrieve my Home8 Mobile app password?
Go to the sign-in page of your Home8 app and tap "Forgot password?". Follow the instruction on
screen to enter your phone number. You will then receive an access code via SMS. After input an
Access Code that app requested, you can then reset the password by yourself. You will also receive
a confirmation email after successfully reset your password.
How can I be sure unauthorized people are unable to look at my videos on the cloud?
With your privacy in mind, all data is encrypted with bank-level security, and each user has his/her
own account to access the video. Our system alerts you and your authorized users when it detects
login attempts from unauthorized smart devices.
How many locations can I manage from my Home8 app?
Home8 app is built to support multi-location management. You can manage as many locations as
you would like, and we do not place a limit on the number of Home8 Systems you can purchase.

FAQ
If I lose my smart device, what should I do to protect my Home8 account?
We recommend you to change your password as soon as possible by using other smart device with
Home8 App installed to sign in to your account to make the change to your password. Alternatively,
you may also contact us to disable your account for you.
What are the requirements prior to purchasing an Home8 System?
Because Home8 System is a fully IoT interactive system, it will require the following:
- Broadband Internet connection. (dial-up connections are not supported)
- DHCP-enabled router with an available LAN port.
- Smart devices with internet connection.
Is there a place I can view the user manual online?
Yes, visit www.home8systems.eu/en/download/ , and then access user manuals.
What can I do if a camera is offline?
If a camera is showing as “offline”, try power cycle on the camera first and wait approximately two
minutes, if the offline situation persists, try moving the camera closer to the Security Shuttle and
power cycle the device again. After tried the methods above, if the offline status is still not resolved,
please contact our Technical Support for further troubleshooting assistance.
What can I do if my system is offline?
First, try checking your internet connection, if the connection is working properly, then unplug the
network cable from your Security Shuttle for 10 seconds, and then reconnect it. If the Security Shuttle
is still offline after 5 minutes, please contact our Technical Support for further troubleshooting
assistance.

Troubleshooting Tips
Are your devices listed in your app?
If you’re having trouble installing your devices, see if they’re listed in your Home8 app:
• Navigate to > Device Management to see if all your devices are listed
Are your devices communicating with Security Shuttle?
• If your devices don’t connect to Security Shuttle, they might be too far away. Take them to a location that’s
closer to Security Shuttle and try again.
• If they do connect, you’ll know the range of your device and where to install a range extender.
• Alternatively, you can move Security Shuttle closer to your device.
• If your devices still don’t communicate with Security Shuttle, even when they’re in the same room,
Do you need to reset your sensor?
If your sensor isn’t communicating with Security Shuttle, your app may ask you to reset your sensor.
• Long press "MANUAL ON/OFF" button on the device for 20 seconds till the LED starts to blink, then
release it.
• Return to the app and follow the onscreen instructions.
Need help installing your Home8 system?
V1.0
• Tap Add Device from Side Menu and follow the on-screen instructions to add any missing devices
navigate to > Add Device on the Home8 app to add your devices again.
d©Ï©ÕÀØË!KÉ¢Ĺhttp://www.home8alarm.com/¡Êŀ
YÏË;»Ø¶ÏĹ§ÕÕÉĹŀŀäääķ§Àºē¶˺ķÀºŀº»Ø¶Ïŀ
º©¶ØÏĹÏØpport@hÀme8¶˺.com
