
Connect the Camera to your home router with an Ethernet cable* and power on the camera.
* For the best data transmission quality, the maximum length of Ethernet cable is 100 meters.
2-AAÉÕ©À»:
Connect the PoE Injector (IEEE802.3af / 48VDC 0.5A) to your home
router with an Ethernet cable. Using the other Ethernet cable,
connect the PoE Injector to the Camera's Ethernet interface.
Power on the PoE Injector.
*Note: PoE Injector and Ethernet cables are not included in the package.
2-BAÉÕ©À»:
1 . Connect your Smartphone to Wi-Fi.
2. Download the Home8 app from the App Store, Google Play, or Windows store and create an account.
Step 1: Set up your smartphone
Option 2: Add it with Virtual Gateway (without Security Shuttle)
Note: Make sure your Wi-Fi router is on.
Make sure the Wi-Fi of your smartphone is on
1. Tap the side bar “≡” and select “Device”.
2. !©»Õ§KLÀÀ»Õ§ã©»Ï»Õ§KLÀ.
3.PÕ7ÀÕ©À»ê»º©»¢»ä¶ÀÕ©À»ĸ Õ§»press “Next”.
Step 3: Add it to the System with Vitural Gateway
1. After scanning the QR code, select your Wi-Fi network and enter
the password if necessary. When finished, tap “Join”.
2. Follow the on-screen instructions.
Step 4: Sync Virtual Gateway with Wi-Fi Network
1 . Insert the microSD* card into the Camera Card Slot before powering up the
Camera. You can also purchase a microSD Card at a later time.
2. There are two ÀÉÕ©À»Ï for powering and connecting.
Please review the two ºÕ§ÀÏ and decide which option you
would like to use:
Step 2: Assemble your device and accessories
9
8
10
11
Power supply interface
Ethernet interface
* Ethernet cable is not included.
Next
microSD Card Slot
WPS/RESET
* NOTE - microSD Card not included.
Continue to next page
FAT32 SDCH type.