Assembled dimensions
Assembly
Parts list
Before you start
1. Please check that all parts are present before you start the assembly of your product, as once assembled, this product is exempt from our money back guarantee. This does not
affect your statutory rights.
2. For ease and speed of assembly, we recommend that before you commence each step, you identify all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people to assemble your product safely.
4. We recommend that, where possible, all items are assembled near to the flat area in which they will be placed in use, to avoid moving the product unnecessarily, once assembled.
Never allow any parts of the tree to come into contact with a source of heat or flames.
5. Please keep plastic bags out of reach of children and animals.
6. Locate your tree on a level surface which will not be damaged by the tree or decorations which could detach.
7. During assembly please take care not to over-tighten any fittings, as this may damage the product.
Unbox the contents in your desired location. Take out
the metal stand (1) and pull apart the legs, so they
are in an 'X' shape, then place it on a flat surface.
Insert the bottom tree section (2) into the metal stand (1) and tighten the wing bolt on the stand.
1
2
3
Metal stand
Bottom section of tree
Middle section of tree
No. Parts list Qty
1
1
1
4Top section of tree 1
990mm
1800mm
Step 1 Step 2
Caution
• This product is intended for INDOOR USE ONLY.
• Do not position or place the tree near fire, candles or any other direct sources of heat. Avoid using in damp, wet and humid areas.
• Do not position your tree where it is a hazard to the elderly, children or pets. Take particular care with electric cables.
• After assembling the tree and adding the decorations, make sure the tree is stable. If the tree is not stable, shift the weight of the decorations and use support wires to attach to
walls and/or window frames (make sure they are secure also).
• Do not overload with heavy decorations.
• Please check all fittings and re-tighten on a weekly basis, or as necessary.
• Save the packaging to store your tree.
• When you have finished using the tree, carefully re-pack following the instructions, to ensure the tree remains in good condition to be re-used. Make sure the storage area is dry,
avoid any damp, wet or humid conditions.
• Retain instructions for future use.
•
This product is for decoration purposes only. Trees have small parts which may pose a choking hazard if detached from the branches. Not to be used by children as a toy. Keep out
of reach of children and pets.
• Ensure tree sections are stable and securely attached to the top of your tree.
1 2
3 4
• Place on a level, hard and flat surface. Do not place where the tree is likely to wobble due to an uneven surface, floors or thick carpeting.
