Homebase 570605 User manual

6FT COLORADO
ARTIFICIAL TREE
INSTRUCTION MANUAL
IMPORTANT: Please read these instructions before using the product and retain for future use
HHGL Limited, MK9 1BA; HHGL (ROI) Limited, D02 X576

1.
2.
3.
4.
5.
6.
7.
Please check that all parts are present before you start the assembly of your product, as once assembled, this product is exempt from our money back guarantee. This
does not affect your statutory rights.
For ease and speed of assembly, we recommend that you identify all the parts required for each step.
For larger items, please ensure that you have sufficient space and people to assemble your product
Please keep plastic bags out of reach of children and animals.
During assembly, please take care not to overtighten any fittings, as this may damage the product.
assembled. Never allow any parts of the tree to come into contact with a source of heat or flames.
Locate your tree on a level surface that will not be damaged by the tree or decorations which could detach.
safely.
We recommend that, where possible, all items are assembled near to the flat area in which they will be placed in use, to avoid moving the product unnecessarily once
Caution
Before you start
This tree is intended for INDOOR USE ONLY.
Do not position your tree where it is a hazard to the elderly, children or pets. Take particular care with electric cables.
This product is for decoration purposes only. Trees have small parts which may pose a choking hazard if detached from the branches. Not to be used by children as a
toy. Keep out of reach of children and pets.
Place on a level, hard and flat surface. Do not place where tree is likely to wobble due t
Ensure tree sections are stable and securely attached to the top of your tree.
After assembling the tree and adding decorations, make sure the tree is stable.
Do not overload with heavy decorations.
Please check all fittings and re-tighten on a weekly basis, or as necessary.
Save the packaging to store your tree.
When you have finished using the tree, carefully re-pack following the instructions to ensure the tree remains in a good condition to be re-used. Make sure the storage
area is dry, avoid any damp, wet and humid areas.
Retain instructions for future use.
Do not position or place the tree near fire, candles or any other direct sources of heat. Avoid using in damp, wet and humid areas.
If the tree is not stable, shift the weight of the decorations and use support wires
to attach to walls and/or window frames (make sure they are secure also).
o an uneven surface, floors or thick carpeting.
Parts list
1800mm
1
925mm
Parts list
2
3
4
5
No. Part List
1
2
3
4
5
Top Section of tree
Middle Section of tree
Bottom Section of tree
Metal stand
Screws
Qty
1
1
1
1
3
Assembled dimensions
No. Parts list
1
2
3
4
5
Top section of tree
Middle section of tree
Bottom section of tree
Metal stand
Screw
Qty
1
1
1
1
1
1
2
3
4
5

Before storage, please repack the product as follows, to avoid damage:
Care and use
1. Before using or re-using the tree, inspect the product carefully. If there are any damaged parts or exposed sharp points, please dispose of the tree.
2. Do not dip in water.
3.
1.
2.
4.
3.
Do not use solvent to clean.
4. If necessary, clean tips carefully with water.
Disassembly and storage
Gently lift off each section of the tree.
Carefully place the tree in its box and tape it shut.
STORE THE PRODUCT IN A COOL AND DRY LOCATION, AWAY FROM SUNLIGHT AND WHERE THE TEMPERATURE DOES NOT EXCEED 40°C.
Remove all decorations.
To shape your tree, pull down
the tree tips and adjust the
branches to fill any gaps.
Assembly complete
Insert the bottom tree section (3)
into the stand first, then tighten the
screw (5). Then insert the middle and
top tree sections (1 & 2).
Open up the metal stand (4)
and lock in the screw (5).
Step 1 Step 2 Step 3
Assembly
4
1
2
3