Homebase 7FT VERSAILLES PREMIUM TREE User manual

INSTRUCTION MANUAL
IMPORTANT: Please read these instructions before using the product and retain for future use
HHGL Limited, MK9 1BA; HHGL (ROI) Limited, D02 X576
7FT VERSAILLES
PREMIUM TREE

For ease and speed of assembly, we recommend that you identify all the parts required for each step.
Parts listAssembled dimensions
Caution
1. Please check that all parts are present before you start the assembly of your product, as once assembled, this product is exempt from ourmoney back guarantee. This
does not affect your statutory rights.
2.
3. For larger items, please ensure that you have sufficient space and people to assemble your product safely.
4. We recommend that, where possible, all items are assembled near to the flat area in which they will be placed in use, to avoid moving the product unnecessari yl once
assembled. Never allow any parts of the tree to come into contact with a source of heat or flames.
5. Please keep plastic bags out of reach of children and animals.
6. Locate your tree on a level surface that will not be damaged by the tree or decorations that could detach.
7. During assembly, please take care not to overtighten any fittings, as this may damage the product.



















Before you start
No. Parts list
1
2
3
4
5
6
Top tree section
Middle tree section
Bottom tree section
Metal stand
Screw
Transformer
Qty
1
1
1
1
1
1
This tree is intended for INDOOR USE ONLY.
Always place the plug into an indoor mains socket.
This product is intended for Christmas decoration only and is not suitable for household room illumination.
WARNING: Do not use the product for anything other than its intended use.
Do not position or place the tree near fire, candles or any other direct sources of heat. Avoid using in damp, wet and humid areas.
This product is fire retardant. Do not allow the product in direct contact with/near a source of heat or flames, e.g. gas or electric heaters, fireplaces, candles or other
similar heat sources.
Do not cover the product with cloth, paper or any other materials when in use, e.g. curtains, nets or bedding.
Do not connect the product to the power supply whilst the product is in the packaging.
The light set is constructed with non-replaceable LED bulbs. DO NOT attempt to replace any of the LED bulbs in the light set.
Only operate this product with the transformer supplied.
Do not connect the light set to any other light set by cutting or joining the sets together.
Unplug the light chain when leaving the house, when retiring for the night, or if unattended.
Do not secure the wiring with sharp hooks or nails. This can cut or damage the wire insulation.
The external flexible cable or cord cannot be replaced. If part of the light set or the cable is damaged, the product MUST be destroyed.
Do not let bulbs rest on the supply cord or any other wire.
This product is not a toy, it's made from small fibres which may detach and pose a choking hazard. Keep out of reach of children and pets. Please do not leave children
unattended near the tree.
Ensure the tree is stable; place it on a firm and level surface, away from where it may be knocked. Please do not overload with excessively heavy decorations.
To avoid the risk of fire, burns, personal injury and electric shock, it should not be played with or placed where small children can reach it.
Please refer to the packaging or product rating label for product class, specifications and rating.
2100mm
1
1150mm
Parts list
2
3
4
5
No. Part List
1
2
3
4
5
Top Section of tree
Middle Section of tree
Bottom Section of tree
Metal stand
Screws
Qty
1
1
1
1
3
1
2
3
4
5
6

Step 2
Open up the metal stand (4)
and lock in the screw (5).
Assembly
Fig. A
Lock the cap.
Find the male and female connections. Insert the male connection into the
female connection.
4
Step 1
1.
3.
5.
4.
Disassembly and storage
2.
Gently lift off each section of the tree.
Care and use
1. Before using or re-using the tree, inspect the product carefully. If there are any damaged parts or exposed sharp points, please dispose of the tree.
2. Do not dip in water.
3. Do not use solvent to clean.
Disposal and recycling
Unplug the transformer from the mains socket and remove all decorations from the tree.
Unplug the light strings from the transformer.
To shape your tree, pull down
the tree tips and adjust the
branches to fill any gaps.
Step 3
Assembly complete
- Combination
- Waves
- Sequential
- Slow glow
- Chasing/flash
- Slow fade
- Twinkle/flash
- Steady on
8 lighting functions
Carefully place the tree in its box and tape it shut.
STORE THE PRODUCT IN A COOL AND DRY LOCATION, AWAY FROM SUNLIGHT AND WHERE THE TEMPERATURE DOES NOT EXCEED 40°C.
Electrical products are labelled with the wheelie bin symbol to indicate that they are to be collected and recycled at end of life. Users of electrical products should
not dispose of them as unsorted municipal waste but use the separate collection facilities available. Check with your local authority for recycling advice. Customer
participation is encouraged to minimise any potential effects on the environment and human health, from the potential presence of hazardous substances.
1
2
3
Insert the bottom tree section (3) into the metal
stand (4) first, then tighten the screw (5). Insert
the middle and top tree sections (2 & 1). Connect
the light chains (see illustration Fig. A) and plug the
transformer (6) into the wall socket.
Before storage, please repack the product as follows, to avoid damage: