Homebase 7FT 6IN GLITTER TIPPED PREMIUM TREE User manual

INSTRUCTION MANUAL
IMPORTANT: Please read these instructions before using the product and retain for future use.
HHGL Limited, MK9 1BA; HHGL (ROl) Limited, D02 X576
7FT 6IN
GLITTER TIPPED
PREMIUM TREE

Parts list
Unbox the contents in your desired location. Take out the
metal stand (1) and pull apart the legs so they are in an 'X'
shape, then place it on a flat surface.
Insert the bottom tree section (2) into the metal stand (1) and tighten
the wing bolt on the stand.
Assembled dimensions
1
2
3
Metal stand
Bottom tree section
Middle tree section
No. Parts list Qty
1
1
1
4 Top tree section 1
5 Adaptor 1
1450mm
2300mm
Step 1 Step 2
1 2
34
Caution
• Always place the plug into an indoor mains socket.
• This product is intended for Christmas decoration only and is not suitable for household room illumination.
• WARNING: Do not use the product for anything other than its intended use.
• Do not position or place the tree near fire, candles or any other direct sources of heat. Avoid using in damp, wet and humid areas.
•
Product is fire retardant. Do not allow the product in direct contact with/near a source of heat or flames, e.g. gas or electric heaters, fireplaces, candles or other similar heat sources.
• Do not cover the product with cloth, paper or any other materials when in use, e.g. curtains, nets or bedding.
• Do not connect the product to the power supply whilst the product is still in the packaging.
•
The light set is constructed with non-replaceable LED bulbs. DO NOT attempt to replace any of the LED bulbs in the light set.
• Only operate this product with the adaptor supplied.
• Do not connect the light set to any other light set by cutting or joining the sets together.
• Unplug the light chain when leaving the house, when retiring for the night, or if unattended.
• Do not secure the wiring with sharp hooks or nails. This can cut or damage the wire insulation.
•
The external flexible cable or cord cannot be replaced. If part of the light set or the cable is damaged, the product MUST be destroyed.
• Do not let bulbs rest on the supply cord or any other wire.
• This product is not a toy, it's made from small fibres which may detach and pose a choking hazard. Keep out of reach of children and pets. Please do not leave children unattended
near the tree.
• Ensure the tree is stable; place it on a firm and level surface, away from where it may be knocked. Please do not overload with excessively heavy decorations.
• To avoid the risk of fire, burns, personal injury and electric shock, it should not be played with or placed where small children can reach it.
• Please refer to the packaging or product rating label for product class, specifications and rating.
5
• The tree is intended for INDOOR USE ONLY.
Before you start
1. Please check that all parts are present before you start the assembly of your product, as once assembled, this product is exempt from our money back guarantee. This does not
affect your statutory rights.
2. For ease and speed of assembly, we recommend that you identify all the parts required for each step.
3. For larger items, please ensure that you have sufficient space and people to assemble your product safely.
4. We recommend that, where possible, all items are assembled near to the flat area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Never allow any parts of the tree to come into contact with a source of heat or flames.
5. Please keep plastic bags out of reach of children and animals.
6. Locate your tree on a level surface that will not be damaged by the tree or decorations which could detach.
7. During assembly, please take care not to overtighten any fittings, as this may damage the product.

• Gently lift off the tree sections, and remove from the metal stand.
Step 5 Step 6
Connect the lighting chain socket to the
adaptor (5). Then plug the adaptor into an
INDOOR mains socket. Check that all the
bulbs are lit.
Assembly complete
Finally, shape the tree by arranging the tips on
the branches to give the desired effect.
Some tree styles have ‘side branches’ attached to
the main branch stem that require additional
shaping.
8 lighting functions
- Combination
- Waves
- Sequential
- Slow glow
- Chasing/flash
- Slow fade
- Twinkle/flash
- Steady on
Insert the middle tree section (3) into the
bottom tree section (2) and push it down
into position. Connect the plugs between
the sections.
Insert the top tree section (4) into the middle
tree section and push it down into position.
Connect the plugs between the sections.
Care and use
Before using or re-using the tree, inspect the product carefully. If there are any damaged parts or exposed sharp points, please dispose of the tree.
Step 3 Step 4
Disassembly and storage
Before storage, please repack the product as follows to avoid damage:
•
Unplug the adaptor from the mains socket and remove all decorations from the tree.
• Unplug the light strings from the adaptor.
• Carefully place the tree in its box and tape it shut. STORE THE PRODUCT IN A COOL AND DRY LOCATION, AWAY FROM SUNLIGHT AND WHERE THE TEMPERATURE DOES NOT
EXCEED 40
Troubleshooting
If the product does not work properly, check these connections:
•
Make sure that the product is securely plugged into the power supply.
• Make sure the light chain is securely connected to the adaptor.
Disposal and recycling
Electrical products are labelled with the wheelie bin symbol to indicate that they are to be collected and recycled at end of life. Users of electrical products should
not dispose of them as unsorted municipal waste but use the separate collection facilities available. Check with your local authority for recycling advice. Customer
participation is encouraged to minimise any potential effects on the environment and human health from the potential presence of hazardous substances.
˚C.