homechoice Ellie baby compactum User manual

Ellie baby compactum
assembly instruction
Shop online – go to
homechoice.co.za
Please follow these guidelines for safe assembly:
Please make sure that you have all the parts and hardware items listed before you start
assembling your product. If you nd that something is missing, please do not assemble.
Contact our Customer Service on 0861 466 324.
homechoice will not be held liable for damages caused by improper assembly.

Part Part
1side panels 2 pieces 9castors 4 pieces
2support
frames 2 pieces 10 bolts 8 pieces
3changing mat 1 piece 11 bolts 4 pieces
4changing mat
support frame 1 piece 12 drainage
hose 1 piece
5base shelf 1 piece 13 plug 1 piece
6bath 1 piece 14 mesh bag 1 piece
7pan trays 3 pieces 15
tool
*not to be
assembled
1 piece
8utility holders 2 pieces
Parts List

If you nd that something is missing, please do not assemble. Contact our Customer Service on 0861 466 324.
Safety and warnings
• Never leave the child unattended
• This product is suitable for children from birth to 12 months old
• Never use it for children who weigh more than 11kgs
• Always check water temperature before use
To ensure the safe operation of your compactum, please follow these
instructions and save them for future reference.
• Do not use bath without the frame
• Always empty bath immediately after use, drainage hose should be permanently
attached to bath
• Basket in middle shelf can carry a maximum of 2 kgs
• Before assembly, inspect the product for damaged hardware, loose joints or missing
parts. Never use if any parts are missing or broken.
• Only use the compactum after it has been fully assembled according to the
guidelines in the Instruction Manual
• Do not move compactum while its in use
• Ensure that the breaks are engaged before use
• Only use original approved parts

Assembly instructions
Take care to assemble while the child is cared for in another room – never leave the child
unattended
Securely stow or dispose of any plastic bags, fasteners and xing ties, and keep out of reach
of children during assembly
Unpack all contents to check that all parts required are present before starting to assemble
Step 1
• Align the support frame with the holes – NOTE: ensure the metal rod is at the bottom as
illustrated
• Insert bolts (J) through the holes in the left-side panel and tighten them into the
threaded ends of the side frame using the supplied tool (O)
• Repeat with the right-side panel
J
B
AJ
O

If you nd that something is missing, please do not assemble. Contact our Customer Service on 0861 466 324.
Step 2
• Turn the compactum onto its side as shown and assemble the changing mat support
frame (D) and the change mat (C) to the assembled side panels
• NOTE: There is a small metal rod on one side of the change mat support frame and a
semi-circle handle on the one side of the change mat as illustrated
• Ensure these sides are facing the same direction when assembling, marking the front of
the compactum
• Align the change mat support frame with the holes on both side panels
• Hook the change mat (C) metal rod loops onto the ends of the support frame tube
• Insert the frame in the holes on both side panels
C
D

• Insert 2 x bolts (K) into the holes in the left side panel and tighten them into the
threaded ends of the side frame using the supplied tools (O)
• Slip the mesh bag (N) elastic loops onto the bolts (K) and attach the right-side panel in
the same way
• Secure the 4 change mat webbing straps to the frame with press studs
K
N
K
O
K
O

If you nd that something is missing, please do not assemble. Contact our Customer Service on 0861 466 324.
Step 3
• Attach the wheels (I) to the 4 corners of the compactum
• Push the wheels rmly into place into the slots provided
• Press down on the pedal to engage the wheel lock
- Push the pedal up to unlock
I

Step 4
• Attach the base shelf (E)
• Place the shelf with the pattern facing out and wrap the 4 aps in and around the 2
side-frame uprights
• Secure with press studs
I

If you nd that something is missing, please do not assemble. Contact our Customer Service on 0861 466 324.
Step 5
• Join the utility holders (H) together and attach by hooking them over the front of the
change to support frame
• Attach the pan trays (G) by hooking each tray over the tops of the 2 side frames
• Finally, place the bath (F) on the top of the compactum
F
H
G

How to use the bath
• Attach the handy drainage hose (L) to the outlet under the bath for easy draining
• Insert the plug before lling with water
L
M

If you nd that something is missing, please do not assemble. Contact our Customer Service on 0861 466 324.
Care
Maintenance
• The correct use and maintenance of this compactum is essential
• This product requires regular maintenance to keep it in good working order
• Regularly check all parts of the product to ensure that they are operating correctly
and for signs of wear or damage
Cleaning
• The changer can be cleaned by sponging with warm water
• Stubborn marks can be removed with a non-abrasive cream cleaner
• Never clean with abrasive, ammonia based, bleach or spirit type cleaner
• Ensure the product is fully dry before use or storage
• Always ensure the bath compactum is stored in a dry place to prevent mold or
mildew developing